| Content | A streamlined unit that’s packed with power, the ACTION-512A from DAS Audio’s ACTION-500 speaker series is a 12 inch, 2-way passive point source speaker. This passive system is specifically engineered to fit a wide range of applications, from fixed installation sound systems to portable PA. Lightweight and compact, the ACTION-512A is a versatile solution for touring, while its low-profile build makes it an easy fit into any size of studio or permanent stage setup.
Combining a 12M14 speaker for low frequencies with an M-34 compression driver for high frequencies, the ACTION-512A also features a 1000 Wpeak Class D amplifier to deliver stellar sound no matter what your application. Additionally, its DAScontrol™ interface uses a high-range 24-bit DSP, while its rear LCD screen gives you access to a selection of presets, EQ modes, delay, gain control, and signal source mix.
The ACTION-512A features a rotatable horn with 90º (horizontal coverage) x 60º (vertical coverage) dispersion. This allows the speaker to be used not only vertically but also rotated to a horizontal orientation to be used in a fixed installation, as a stage monitor, or even as a front fill. The ACTION-512A boasts a frequency range of 50 Hz to 20 kHz, while it has a nominal impedance of 8 ohms.
A versatile solution for touring, the ACTION-512A is an ideal addition to any size of studio or permanent stage setup. It’s great for sound reinforcement in live performance venues, bands, DJs, music playback, A/V systems, conferences, and presentation. It delivers particularly awesome audio quality to speech and vocals.
The ACTION-512A is built with the same attention to detail and commitment to high-quality construction as the entirety of DAS Audio’s product line. All systems are developed to live up to their core philosophy of stringent quality standards in both the individual materials they use and the overall design. The entire ACTION-500 series uses birch plywood construction for a tight, natural, and warm sound.
DAS Audio ACTION-512A Features
- Active biamp system
- Dual-channel 1000W peak Class D amplifier
- Birch plywood enclosure
- Durable ISO-flex paint
- DAScontrol™ interface for easy setup and adjustment
- DSP with presets and LCD screen
| IsoAcoustics' Aperta Support plate can increase the surface area of speaker stand tops to accommodate the length and width of isolation stands or speakers. IscoAcoustics recommends and provides double sided tape to fasten their support plate but they can also be drilled to any surface if desired. |
The ForceField Subwoofers are unique in appearance and incomparable in its deep, rich bass ideal for music and movies. The ForceField 3 is extremely compact and affordable without compromising its ability to perform.
The ForceField Subwoofers’ unique and attractive cabinet shape, with its non-parallel cabinet walls (the top is narrower than the bottom when viewed from the front), helps the ForceField subs achieve extraordinarily deep and tuneful bass that is ideal for music and movies. Their cutting-edge amplifier design employs state-of-the-art DSP control for frequency shaping so the subwoofer produces accurate, consistent, and musical bass performance.
Many of today's subwoofers fall into either the ultra-compact high-output category or the (larger) high performance, extended response, high-output category. These two design types tend to offer different performance benefits, the ultra-compact having the ability to play extremely loud, but over a narrower bandwidth and the large subs having this high output plus more extended response.
GoldenEar's engineering team set out to accomplish the best of both worlds with the new ForceField subwoofers: small size, yet with the smooth & wide response of a larger sub. There's no sleight of hand, just great engineering - all ForceField subwoofers share the same technologies, here is a list of their features. Read through these and then take a good demo disc into your GoldenEar dealer's sound room and listen for yourself.
- Custom-designed high-output drivers with very large motor assemblies. These drivers handle massive power, have very long excursions, and have ultra-low distortion.
- Rigid cabinets with non-parallel sides to minimize standing waves and distortion. The drivers are front firing in all of our subwoofers for optimal performance. The cabinets' possess a unique and understated shape and style that matches well with any décor.
- The driver's response is enhanced with a carefully tuned, down-firing, quadratic-shaped passive radiator (no noisy ports on ForceField subs). The quadratic shape allows the radiators to use maximum surface area on the bottom of the cabinets and gets even greater output from the slot-loading that results from the subwoofers' interface with the floor (see next point).
- The soft, energy-absorbing feet provided with every ForceField sub serve a number of functions. First, they hold the subwoofer at the correct distance off the floor so the passive radiator slot-loads with it for significantly increased output at the lowest frequencies. Second, the soft feet keep the subwoofer from dancing around on the floor.
- ForceField subwoofer amplifiers are designed in-house by GoldenEar engineering, so each is the perfect amp to power its specific subwoofer model.
- In addition, the amps all have powerful DSP sections to optimize frequency response, minimize distortion and prevent damage from overdriving. These amplifiers are all low distortion and extraordinarily powerful (up to 1500 watts on the ForceField 5) for reproducing seriously high-output AND low bass.
- ForceField subs all have speaker-level inputs and outputs (with a high pass crossover on the outputs) as well as a direct LFE input, too.
- Non-parallel sides minimize standing waves and distortion. The shape allows the radiators to use maximum surface area on the bottom of the cabinets and gets even greater output from the slot-loading that results from the subwoofers' interface with the floor.
- Features 1000-watt digital amp, 8" high-power long-throw active driver, and 9-5/8"x 11-3/8" quadratic planar infrasonic radiator.
|
The ElectroMotion FX2 features dual Folded Motion XT tweeters in a wide-dispersion array to guarantee optimal surround channel sound in even the most demanding home theaters.
- A single 6.5-inch doped fiber-cone woofer provides a powerful low-frequency extension.
- Designed to easily corner mount, wall mount or angle-wall mount for versatile placement in any room.
|
The ultra-compact SuperSub X (just a little bigger than a 12-1/2" cube) utilizes the same dual-plane, patented inertially-balanced driver array as the SuperSub XXL, but instead employs two horizontally-opposed 8" ultra-long-throw active drivers and two vertically-opposed 10-1/2" x 9-1/2" planar infrasonic radiators, driven by a 1400 watt Class D Digital amplifier.
GoldenEar's best subwoofer, the new SuperSub™ Series models are ultra-high-performance yet amazingly compact subwoofers that incorporate many recently developed unique and advanced technologies and components. The goal was to create beautifully styled, finely finished, reasonably sized subwoofers that could generate very low-frequency pressure waves of extremely high amplitude, while delivering accurate and precise low-frequency performance that is both highly impactful and extremely musical.
In order to achieve this, the SuperSubs, GoldenEar's best subwoofer series, incorporates a unique, patented 360 degree dual-plane inertially-balanced driver and sub-bass radiator topology, combined with a very advanced electronics package. With two active drivers separated horizontally in space, as well as two passive radiators separated vertically, the driver-to-room coupling is distributed much more smoothly, for in-room bass performance that can’t typically be achieved with a single subwoofer.
The electronics packages that drive the SuperSubs' fully balanced array are a 1600 watt (XXL) and 1400 watt (X) Class D Digital amplifiers whose design is based on the technology originally developed for the GoldenEar Triton One tower. Features include: Discrete multi-band limiting, phase-perfect equalization, fully balanced and advanced reconstruction filters and a strong focus on keeping latency to an absolute minimum. Input facilities include a direct-coupled, unfiltered LFE input for home theater, or stereo Left/Right low-level inputs with low-pass for two-channel setups. Sonically, the result of all this technology is a rock-solid bass response that is both exceptionally fast and tuneful for music and extraordinarily deep and powerful, in order to effortlessly reproduce the most extreme movie sound effects.
- Two 8" long-throw high-output bass drivers
- Two 10-1/2" x 9-1/2" quadratic planar infrasonic radiators
- 1400 Watt ForceField digital amplifier
- LFE Line-Level Input: Unfiltered (no low pass), direct-coupled
- Right/Left Line Level Input: Variable Low-Pass from 40 Hz – 150 Hz
- Fuse Size: 6-amp 250-volt slow blow fuse (110-volt version) / 4-amp 250-volt slow blow fuse (240-volt version)
| The Triton Three+ Loudspeaker is a smaller version of the award-winning Triton One and Triton Two+. It includes a built-in powered subwoofer and is engineered for superb performance in both high quality two channel stereo systems as well as in multi-channel home theater and music systems.
Like the Triton Two+, the newly updated Triton Three+ incorporates technologies developed for the Triton One. Its built-in powered subwoofer (a technology first pioneered by GoldenEar principals Sandy Gross and Don Givogue) includes an integral 800 watt GoldenEar ForceField digital/DSP controlled power amp driving an active front-mounted long-throw 5" x 9" quadratic subwoofer driver. This is coupled to two opposing, inertially balanced 6-3/4" x 8" quadratic planar infrasonic passive radiators which are located on the sides, near the floor, in order to take full advantage of boundary coupling. There is one of the same 4.5" high-definition spider-leg, cast-basket MVPP™ drivers as used in the Triton Two+, along with the same GoldenEar signature High-Velocity Folded Ribbon (HVFR™) tweeter. Performance-wise, the Triton Three+ delivers the same boxless three-dimensional imaging as the bigger Tritons. Likewise, the powerful, deep subwoofer bass blends perfectly with the silky smooth, utterly transparent midrange and high frequencies, putting many dramatically more expensive speakers to shame.
- Features a built-in powered subwoofer, and an integral 800 watt GoldenEar ForceField digital/DSP controlled power amp driving an active front-mounted long-throw 5" x 9" quadratic subwoofer driver.
- Also features 4.5" high-definition spider-leg, cast-basket MVPP™ drivers used in the Triton Two+, along with the same GoldenEar signature High-Velocity Folded Ribbon (HVFR™) tweeter.
Driver Complement:
One - 5˝ x 9˝ Long-Throw Quadratic Subwoofer Bass Driver, coupled to:
Two - 6-3/4˝ x 8˝ Quadratic Planar Infrasonic Radiators
One - 4-1/2˝ High-Definition Cast-Basket MVPP™ Upper-Bass/Mid Driver
One - HVFR™ High-Velocity Folded Ribbon Tweeter
|
Reviews
There are no reviews yet.