| Content | IsoAcoustics' Aperta Support plate can increase the surface area of speaker stand tops to accommodate the length and width of isolation stands or speakers. IscoAcoustics recommends and provides double sided tape to fasten their support plate but they can also be drilled to any surface if desired. |
The compact, 14" Tall Aon 3 Bookshelf Monitor incorporates a 7", High-Definition, Multi-Vaned Phase Plug (MVPP™), cast-basket Mid-Bass Driver, coupled to two 8" Inertially-balanced side-mounted Low-Frequency Radiators and the GoldenEar High-Velocity Folded Ribbon Tweeter (HVFR™).
The BRX, Aon 2 and 3 bookshelf speakers are exceptionally compact, ultra-high-performance speakers that were originally developed for use as nearfield monitors in professional mixing applications. The design goal was to produce modestly-sized shelf or stand-mountable bookshelf speakers that would achieve accurate high-definition sonic reproduction, with superb three-dimensional imaging, comparable to that achieved by GoldenEar’s award-winning Triton Towers. The new BRX was specifically developed incorporating technology developed for the Triton Reference in order to achieve reference level performance. Although they don’t have quite the awe-inspiring bass of the floor-standing Tritons, great care has been taken, and extensive technology has been incorporated, to ensure that the BRX and Aons can deliver a remarkably satisfying full range listening experience without the need for a separate subwoofer.
Both the BRX and Aon models incorporate GoldenEar-designed cast-basket bass/midrange drivers with technology derived from the midrange units developed for the Tritons. The BRX driver is actually almost exactly the same as the 6" driver used in the Triton Reference. In addition, they all use extraordinary and costly High Velocity Folded Ribbon (HVFR™) high frequency radiators. And the BRX uses the same tweeter developed for the Triton Reference. Lastly, each BRX and Aon model utilizes two side-mounted planar low-frequency radiators in an inertially balanced configuration in order to properly load the bass/midrange drivers for an open, box-less midrange, while also contributing to their’ remarkably extended bass for such small enclosures.
|
Housed within the gorgeous piano-gloss black enclosure are two horizontally-opposed 12" ultra-long-throw active drivers and two vertically-opposed 15" x 13" planar infrasonic radiators. This dual-plane, patented† dynamic inertial-balancing preserves and focuses all the energy produced by the transducers in order to more effectively move the air in the room, rather than wasting energy moving the box. It also enables you to hear all the fine subtle details in your recordings.
GoldenEar's best subwoofer, the new SuperSub™ Series models are ultra-high-performance yet amazingly compact subwoofers that incorporate many recently developed unique and advanced technologies and components. The goal was to create beautifully styled, finely finished, reasonably sized subwoofers that could generate very low-frequency pressure waves of extremely high amplitude, while delivering accurate and precise low-frequency performance that is both highly impactful and extremely musical.
In order to achieve this, the SuperSubs, GoldenEar's best subwoofer series, incorporates a unique, patented* 360 degree dual-plane inertially-balanced driver and sub-bass radiator topology, combined with a very advanced electronics package. With two active drivers separated horizontally in space, as well as two passive radiators separated vertically, the driver-to-room coupling is distributed much more smoothly, for in-room bass performance that can’t typically be achieved with a single subwoofer.
The electronics packages that drive the SuperSubs' fully balanced array are a 1600 watt (XXL) and 1400 watt (X) Class D Digital amplifiers whose design is based on the technology originally developed for the GoldenEar Triton One tower. Features include: Discrete multi-band limiting, phase-perfect equalization, fully balanced and advanced reconstruction filters and a strong focus on keeping latency to an absolute minimum. Input facilities include a direct-coupled, unfiltered LFE input for home theater, or stereo Left/Right low-level inputs with low-pass for two-channel setups. Sonically, the result of all this technology is a rock-solid bass response that is both exceptionally fast and tuneful for music and extraordinarily deep and powerful, in order to effortlessly reproduce the most extreme movie sound effects.
- Two 12" long-throw high-output bass drivers
- Two 15" x 13" quadratic planar infrasonic radiators
- 1600 Watt ForceField digital amplifier
- LFE Line-Level Input: Unfiltered (no low pass), direct-coupled
- Right/Left Line-Level Input: Variable Low-Pass from 40 Hz – 150 Hz
- Fuse Size: 8-amp 250-volt slow blow fuse (110-volt version) / 6.3-amp 250-volt slow blow fuse (240-volt version)
|
MartinLogan's surface mount bracket can be used with the Outdoor Living Series Sat 40 and Sat 60 speakers to enhance the ambiance of your outdoor living space. With a sleek, attractive dark bronze finish, the stakes look and feel high-quality.
- Mount your speakers on the ground, in a tree, on a deck rail, or under an eave with the 12" Ground Stake.
- The half-inch threaded "Quick Twist Cap" gives you the flexibility to mount or "plant" the satellites anywhere to get the sound coverage you want.
- "Quick Twist Cap" works universally with all three speaker mounts: 12" Ground Stake, wire-protecting Burial conduit Junction, or Surface Mount Bracket for walls and decks.
|
MartinLogan's high-performance ElectroMotion IW in-ceiling speaker delivers incredible sound to your home theater with a 6.5-inch aluminum cone woofer and Folded Motion tweeter.
- The ElectroMotion Architectural Series features MartinLogan's award-winning Folded Motion thin film transducer technology to take acoustical performance to a new level with in-wall and in-ceiling applications.
- With Folded Motion tweeter technology, response time is drastically reduced with the use of a pleated diaphragm that "squeezes" air to create sound, almost like an accordion.
- The sturdy mounting-lock system allows for quick, hassle-free installation with firm coupling of the speaker's chassis to the ceiling. When removing the speaker, the locks retract and latch themselves back in their housings.
| The Triton Three+ Loudspeaker is a smaller version of the award-winning Triton One and Triton Two+. It includes a built-in powered subwoofer and is engineered for superb performance in both high quality two channel stereo systems as well as in multi-channel home theater and music systems.
Like the Triton Two+, the newly updated Triton Three+ incorporates technologies developed for the Triton One. Its built-in powered subwoofer (a technology first pioneered by GoldenEar principals Sandy Gross and Don Givogue) includes an integral 800 watt GoldenEar ForceField digital/DSP controlled power amp driving an active front-mounted long-throw 5" x 9" quadratic subwoofer driver. This is coupled to two opposing, inertially balanced 6-3/4" x 8" quadratic planar infrasonic passive radiators which are located on the sides, near the floor, in order to take full advantage of boundary coupling. There is one of the same 4.5" high-definition spider-leg, cast-basket MVPP™ drivers as used in the Triton Two+, along with the same GoldenEar signature High-Velocity Folded Ribbon (HVFR™) tweeter. Performance-wise, the Triton Three+ delivers the same boxless three-dimensional imaging as the bigger Tritons. Likewise, the powerful, deep subwoofer bass blends perfectly with the silky smooth, utterly transparent midrange and high frequencies, putting many dramatically more expensive speakers to shame.
- Features a built-in powered subwoofer, and an integral 800 watt GoldenEar ForceField digital/DSP controlled power amp driving an active front-mounted long-throw 5" x 9" quadratic subwoofer driver.
- Also features 4.5" high-definition spider-leg, cast-basket MVPP™ drivers used in the Triton Two+, along with the same GoldenEar signature High-Velocity Folded Ribbon (HVFR™) tweeter.
Driver Complement:
One - 5˝ x 9˝ Long-Throw Quadratic Subwoofer Bass Driver, coupled to:
Two - 6-3/4˝ x 8˝ Quadratic Planar Infrasonic Radiators
One - 4-1/2˝ High-Definition Cast-Basket MVPP™ Upper-Bass/Mid Driver
One - HVFR™ High-Velocity Folded Ribbon Tweeter
|
Reviews
There are no reviews yet.