| Content |
S4 speaker stands are the perfect addition to your desktop speaker setup. With 16 of upward tilt, they ensure you experience the full range of frequencies your speakers have to offer. Each stand features foam padding to reduce vibration when you have the sound cranked up, and includes a mounting hole and 1/4"-20 screw to secure your YU4 or other compatible speakers in place.
- Get the most out of your speakers by tilting them toward your ears, ensuring you never miss out on those higher frequencies.
- Improve stabilization by securing YU4 or other compatible speakers in place with the provided 1/4"-20 screw.
- Foam padding on the top and bottom of each stand helps to maintain stability and reduce undesirable resonance.
Features
Desktop Stands: Pair the Kanto S4 desktop stands with your Kanto YU4 powered desktop speakers or another brand of desktop speakers of similar size and weight.
- Overall Dimensions: 5.5625" (w) x 2.0625" (h) x 7.9375" (d)
- Top Plate Dimensions: 3.875" (w) x 6.25" (d)
- Base Dimensions: 5.5625" (w) x 7.9375" (d)
- Weight Capacity: up to 8 lbs
- Your compatible desktop speakers should measure 5" to 7" (w) x 7" to 10" (d), and weigh no more than 8 lbs.
- 1/4"-20 screws are included to secure the Kanto YU4 speakers to the desktop stands; other brands of similar size speakers will not use these screws.
16° Vertical Tilt: With 16° of vertical tilt, the S4 desktop speaker stands angle your speakers towards your ears, ensuring you experience the full range of frequencies they have to offer.
Vibration Resistant: The S4 desktop speaker stands feature multiple areas of foam padding to maintain stability and reduce vibration.
Available In A Variety Of Colors: The S4 desktop stands are available in a variety of colors ( black, white, aluminum, brass, copper, or stainless steel) to compliment your decor
|
The Motion FX features dual Folded Motion tweeters in a wide dispersion configuration, powerful bass, and a folded reflex port in a compact, affordable package with stunning performance.
- A single 5.25-inch paper cone woofer doped for stability and damping.
- Precision Vojtko™ crossover with custom air core coil and low DCR steel laminate inductors; polyester film and low DF electrolytic capacitors.
- Designed to easily corner mount, wall mount or angle-wall mount for versatile placement in any room.
- Convenient push-style binding posts easily adapt to accept banana plugs.
| The Triton Three+ Loudspeaker is a smaller version of the award-winning Triton One and Triton Two+. It includes a built-in powered subwoofer and is engineered for superb performance in both high quality two channel stereo systems as well as in multi-channel home theater and music systems.
Like the Triton Two+, the newly updated Triton Three+ incorporates technologies developed for the Triton One. Its built-in powered subwoofer (a technology first pioneered by GoldenEar principals Sandy Gross and Don Givogue) includes an integral 800 watt GoldenEar ForceField digital/DSP controlled power amp driving an active front-mounted long-throw 5" x 9" quadratic subwoofer driver. This is coupled to two opposing, inertially balanced 6-3/4" x 8" quadratic planar infrasonic passive radiators which are located on the sides, near the floor, in order to take full advantage of boundary coupling. There is one of the same 4.5" high-definition spider-leg, cast-basket MVPP™ drivers as used in the Triton Two+, along with the same GoldenEar signature High-Velocity Folded Ribbon (HVFR™) tweeter. Performance-wise, the Triton Three+ delivers the same boxless three-dimensional imaging as the bigger Tritons. Likewise, the powerful, deep subwoofer bass blends perfectly with the silky smooth, utterly transparent midrange and high frequencies, putting many dramatically more expensive speakers to shame.
- Features a built-in powered subwoofer, and an integral 800 watt GoldenEar ForceField digital/DSP controlled power amp driving an active front-mounted long-throw 5" x 9" quadratic subwoofer driver.
- Also features 4.5" high-definition spider-leg, cast-basket MVPP™ drivers used in the Triton Two+, along with the same GoldenEar signature High-Velocity Folded Ribbon (HVFR™) tweeter.
Driver Complement:
One - 5˝ x 9˝ Long-Throw Quadratic Subwoofer Bass Driver, coupled to:
Two - 6-3/4˝ x 8˝ Quadratic Planar Infrasonic Radiators
One - 4-1/2˝ High-Definition Cast-Basket MVPP™ Upper-Bass/Mid Driver
One - HVFR™ High-Velocity Folded Ribbon Tweeter
| With the ElectroMotion ESL, Martin Logan has created the world's most affordable high-performance hybrid electrostatic loudspeaker, with a legendary CLS™ XStat™ transducer and an 8-inch woofer to deliver ideal home theater front/surround sound.
ElectroMotion ESL
The ElectroMotion ESL represents a bold new direction for electrostatic loudspeaker design. Featuring a full-sized 34-inch tall curvilinear XStat™ electrostatic transducer and a superbly integrated high-performance woofer, the new EM-ESL performs more like a mini-flagship than an entry level audiophile speaker. Designed for both 2-channel music enthusiasts and those seeking the worlds most articulate and dynamic multi-channel home theater systems, the EM-ESL is the most compelling 'affordable' audiophile-grade speaker ever brought to market.
The ElectroMotion ESL (EM-ESL) represents a brave new direction for electrostatic loudspeaker design. Featuring a full-sized 34-inch tall curvilinear XStat™ electrostatic transducer the new ESL performs more like a mini-flagship than an entry level audiophile speaker. Long time MartinLogan enthusiasts are sure to describe ElectroMotion ESL as the second-coming of the legendary Aerius electrostatic speaker which debuted in 1992 and went on to sell in record numbers. The new ESL, however, boasts 40 percent more radiating surface, a superbly integrated and authoritative bass performance, and a sensitivity rated at 91dB. In addition, the ESL is capable of being effortlessly powered by both receivers and high-end amplifiers alike.
ElectroMotion ESL's XStat electrostatic MicroPerf panel is housed within a radical aluminum and composite AirFrame™ similar to those found on MartinLogan's flagship products. AirFrame technology rigidifies the electrostatic panel without obstructing playable surface area or interfering with ambience enriching dipole sound radiation. At the same time, an AirFrame provides electrical and acoustical isolation, minimizing intermodulated distortion caused by vibration and resonance while enhancing imaging, low-level sonic detail, accuracy, and efficiency. MicroPerf design optimizes the individual holes of The EM-ESL's electrostatic panel. MicroPerf design substantially increases diaphragm radiating area, compared to early generations—without compromising structural integrity. The resulting increase in output capability and efficiency allows The EM-ESL's panel to enjoy a substantial leap in bandwidth and dynamics without growing larger. For example, The EM-ESL's XStat electrostatic panel features 129 square inches of sound radiating surface on both the front and back and a sensitivity of 91dB into 6 Ohms. The Aerius, well received its day, only had 93 square inches and a sensitivity of 89dB into 4 Ohms.
A unique XStat™ transducer was developed for the ElectroMotion ESL to reduce the gauge thickness of the electrostatic panel's steel stators. The reduced gauge does not alter the performance characteristics of the panel. However, as a natural byproduct of tighter build tolerances, it does increase the visual transparency of the panel. The EM-ESL's new XStat panel is so visually transparent it nearly vanishes when you're sitting and listening.
Controlled Dispersion Sound Radiation
Another key attribute of the ElectroMotion ESL is its naturally dipolar radiation pattern. A true dipole, The EM-ESL radiates sound with equal intensity from the front and back of its diaphragm, but the outputs are in opposite phase. As a result, sound waves rippling out toward the sides meet at the speaker's edge and cancel. That and the relatively large size of the ElectroMotion ESL's electrostatic panel cause output at the sides to be very low relative to that of a conventional loudspeaker, which in turn minimizes side-wall reflections that tend to muddle sonic detail and stereo imaging. While the reduction in output to the sides contributes to the astonishing clarity for which electrostats are revered, the energy reflected off the wall behind the speaker opens up and deepens the sound.
Superb Bass Integration
To seamlessly blend audio output from the high- and mid-frequency electrostatic panel to the low-frequency woofer the ElectroMotion ESL features a proprietary Vojtko™ topology filter utilizing custom air core coil and low DCR steel laminate inductors, polyester film capacitors in series, and low DF electrolytic capacitors in parallel.
A precise 8-inch high-excursion, perfectly balanced, audiophile grade, doped fiber cone woofer was custom designed exclusively for The EM-ESL by MartinLogan's in-house engineering team. This woofer precisely optimizes cone suspension and magnetic flux field to produce high levels of bass output and simultaneous precise midrange. The custom woofer's rigid light-weight diaphragm eliminates cone flexure and minimizes response time to achieve remarkably low-distortion approaching that of MartinLogan's award-winning electrostatic panel design.
Easy Connections, Solid Adjustable Footing
Convenient push-style speaker terminals and curved inserts help guide speaker wire effortlessly into place. The rubber end caps on the terminal are also removable for the use of banana plugs instead of bare wire. The EM-ESL is supplied with sturdy, 3/8-16 ETC™ spikes, which can be used to fine tune vertical wave launch, enhance stability on thick carpets, and create tighter coupling between speaker and floor to provide a tighter and detailed bass performance. Each spike is conveniently covered by removable rubber end caps if you prefer not to use spikes. | IsoAcoustics Aperta Isolation Stands can reduce your speakers sound vibrations from transferring to the surface below. Isolating your speakers and equipment can increase clarity and tighten bass. Featuring easy tilt adjustment for precision listening positions. IsoAcoustic Aperta 300 is designed to isolate center channel speakers, studio monitors and bookshelf speakers in horizontal positions.
- Helps eliminate vibrations created by speakers
- Best for center channel and horizontally positioned studio speakers
- Tilt feature to position your speaker to your ear
- Supports up to 60 lbs Each
- Size: 10L x 8W x 4H
- Sold as each.
- Designed for a speaker at least 11.8” wide and 7.8” deep with a max weight of 60 pounds
- Aluminum finish
|
MartinLogan's Burial Conduit Junction can be used with the Outdoor Living Series Sat 40 and Sat 60 speakers to enhance the ambiance of your outdoor living space. With a sleek, attractive dark bronze finish, the conduit junction looks and feels high-quality.
- Mount your speakers on the ground, in a tree, on a deck rail, or under an eave with the 12" Ground Stake.
- The half-inch threaded "Quick Twist Cap" gives you the flexibility to mount or "plant" the satellites anywhere to get the sound coverage you want.
- "Quick Twist Cap" works universally with all three speaker mounts: 12" Ground Stake, wire-protecting Burial conduit Junction, or Surface Mount Bracket for walls and decks.
|
Reviews
There are no reviews yet.