Onkyo A-9150 2-Channel 120W Home Theater Power Amplifier

$388.14

GTIN: 889951000990 SKU: 889951000990 Category:

Description

About Onkyo A-9150

Integrated Stereo Amplifier
Take Music Further with True Fidelity

Building on acclaim for the award-winning A-9010, Onkyo again raises the bar for musicality in the entry class with its A-9150 Integrated Stereo Amplifier. Unique technologies coalesce around a refined amplification system to deliver outstanding transient response, superb dynamics, lifelike soundstaging, and nuanced articulation of your favorite analog or digital music.

Key to this sense of realism is Discrete SpectraModule, which boasts a slew rate of more than 500 V/micros for flat linearity up to megahertz bandwidth. Rediscover the vitality of analog with MM/MC phono input served by dedicated equalizers on a separate circuit board, with custom head-amp operating in discrete configuration for MC signals.

Listeners with big CD libraries will discover new life in the format with AKM’s premium 768 kHz/32-bit DAC (AK4452) enhanced by DIDRC Filter, an original circuit technology that cleanses signals of high-frequency noise. Backed by 70 years’ experience in hi-fi design, the A-9150 invites you inside the energy of every musical performance.

Refined Power Amplification
In order to deliver a clear and comfortable audio image, it’s vital that sounds of different frequencies arrive at the listening position simultaneously.

Power amplification circuits feature original topology that’s carefully tuned for phase accuracy, wide-spectrum signal reproduction, and natural transient response.

Fitted with hand-selected audio-grade parts, the amplifier contributes to lifelike and involving sound quality.

Nuanced Musicality Delivered with Discrete SpectraModule
Discrete SpectraModule boasts a slew rate of over 500 V/micros, significantly higher than competitive products that use a standard IC chip.

High-voltage performance enables flat linearity into the megahertz range for full-bandwidth signal reproduction. This is important not only for natural transients expressing the nuances in music with freshness and vitality, but also for accurate definition of instruments ranged around a larger and more realistic soundstage.

Dedicated MM/MC Phono Circuit Board
The A-9150 makes your records sound better than ever. A gold-plated phono input supports signals from either MM or MC cartridges fitted to your choice of turntable.

Separate phono circuit board has dedicated equalizers served by a top-quality customized head amp, which operates in discrete configuration for MC signals. Together with analog power amplification, this high-grade phono input design expresses the depth and vitality of music on vinyl.

Customized High-Current Transformer and Custom Audio-Grade Capacitors
Current has great influence on sound quality. High current is required for a better grip on the speaker transducers, improving control and accuracy.

A customized high-output transformer and two huge custom capacitors inside the A-9150 deliver current through discrete output-stage transistors that are kept cool by an aluminum heat sink.

Speakers react instantly, with throw-range precisely controlled for accurate articulation even through dynamic and complex musical passages.

DIDRC Filter and Hi-Grade DAC for Natural Sound
Distortion in the ultra-high-frequency spectrum can have a noticeable impact on the character of audible sound. Even the best D/A converters introduce some noise to the signal, and that noise is amplified, distorting the sound you hear.

DIDRC Filter completely erases ultra-high-frequency noise. Performance is optimized for digital music with an undistorted frequency response extending far above the range of audibility.

Combined with a premium 768 kHz/32-bit DAC, you can enjoy a greater sense of realism from digital sources, with none of the unnatural “synthesized” feeling sometimes produced by digital processing.

Solid Build with High-grade Terminals
A peek under the hood tells you what to expect from the A-9150. Held in place by a flat chassis that tames resonance, the digital audio board is isolated from the analog circuitry.

L/R channels are symmetrical to equalize signal path-lengths and minimize stereo playback errors. Coaxial digital inputs, phono input, speaker posts, and RCA line inputs are gold-plated and of excellent quality.

Finished with an aluminum front panel and volume control, the A-9150 presents as a component built to last.

Onkyo A-9150 Features

  • A-9150 Features:
  • Refined Power Amplification Circuitry with Discrete SpectraModule
  • Dedicated MM/MC Circuit Board and High Quality Discrete Head Amp
  • Natural Music Reproduction with Hi-Grade DAC and DIDRC Filter
  • Robust Flat Chassis
  • Quality Audio Terminals
  • Advanced Features:
  • 60 W/Ch (4 Ohm, 20 Hz-20 kHz, 0.08% THD, 2 Channels Driven, IEC)
  • Discrete SpectraModule Produces High Instantaneous Voltage for Immersive Soundstaging, Improved Instrument Separation, and Lively Transient Response
  • DIDRC Filter Prevents Ultra-high-frequency Distortion Affecting Audible Sound
  • High Current Power Supply Transformer and Two Hi-Grade Customized Capacitors
  • High-Current Low-Impedance Drive for Enhanced Speaker Control
  • Optimum Gain Volume Control Circuitry Isolates Signal from Noise Floor to Prevent Distortion at Lower Volume
  • Symmetrical L/R Channel Layout with Equal Signal-path Lengths to Minimize Stereo Playback Errors
  • Isolated Processing, Pre-amplification, and Power Amplification Circuitry Reduces Electrical Interference on Audio Signal
  • Large Extruded Aluminum Heat Sink
  • AKM (AK4452) 768 kHz/32-bit Digital-to-Analog Converter
  • Direct Mode for Reproduction Faithful to Original Source
  • Front-panel A/B Speaker Drive Selector
  • Available in Black or Silver Finish
  • Inputs and Connections Features:
  • 4x Gold-plated Analog RCA Audio Inputs (Rear)
  • 2x Optical Digital Inputs (192 kHz/24-bit Capable)
  • 2x Gold-plated Coaxial Digital Audio Inputs (192 kHz/24-bit Capable)
  • 2x Pairs of Gold-plated Speaker Posts (A+B)
  • Gold-plated Phono Input (MM/MC) to Suit Any Turntable
  • 6.3mm Headphone Jack
  • Gold-plated Main Input
  • Gold-plated Pre Out
  • RI (Remote Interactive) Remote Control Input
  • Additional Features:
  • Tone Controls (Bass/Treble/Balance)
  • Aluminum Front Panel and Aluminum Volume Control Knob
  • Rigid Steel Chassis to Reduce Resonance
  • Stable Isolator Feet Minimize Vibration-borne Interference
  • Efficient 0.2 W Power Consumption on Standby
  • Full-sized and Full-function RI Remote Control

Onkyo A-9150 Specifications


Amplifier

Power Output
60 W per channel @ 4 Ohms, 20 Hz to 20 kHz, 0.08% THD, 2 channels driven, FTC
THD & Noise
0.08% (20 Hz to 20 kHz, rated power)
Inputs
2x optical TOSLINK
2x digital coaxial
5x stereo RCA
1x stereo RCA phono with ground screw
Outputs
1x stereo RCA line out
1x stereo RCA pre-out
1x 1/4″ (6.35mm) headphone (front)
Other Connectors
1x 1/8″ (3.5mm) RI remote
Speaker Connectors
4x binding post pairs (A + B)
Input Sensitivity and Impedance
Line: 220 mV / 220 kOhms
Phono MM: 4 mV / 47 kOhms
Phono MC: 0.4 mV / 120 Ohms
Output Level and Impedance
RC: 0.2 V / 2.3 kOhms (Line Out)
Phono Overload (MM): 70 mV / 1 kHz, 0.5%
Phono Overload (MC): 7 mV / 1 kHz, 0.5%
Frequency Response
10 Hz to 100 kHz +1 dB / -3 dB (Line 1, Direct)
Tone Control
Bass: +/-10 dB (100 Hz)
Treble: +/-10 dB (10 kHz)
Signal to Noise Ratio
Line 1, IHF-A: 107 dB
Phono MM, IHF-A: 82 dB
Phono MC, IHF-A: 73 dB
Speaker Impedance
A or B: 4 to 16 Ohms
A + B: 8 to 16 Ohms

General

Power Supply
120 VAC, 60 Hz
Power Consumption
Active: 170 W
Powered, No Sound: 35 W
Standby: 0.15 W
Dimensions (W x H x D)
17.1 x 5.5 x 13.1″ (435 x 139 x 331mm)
Weight
20.3 lb (9.2kg)

Reviews

There are no reviews yet.

Be the first to review “Onkyo A-9150 2-Channel 120W Home Theater Power Amplifier”

Your email address will not be published. Required fields are marked *

Quick Comparison

SettingsOnkyo A-9150 2-Channel 120W Home Theater Power Amplifier removeYamaha R-N602 Network Hi-Fi Receiver with MusicCast removeYamaha A-S801 Integrated Amplifier, 290W Dynamic Power at 2 Ohms, 10Hz-100kHz Frequency Response, Black removeYamaha A-S701 Integrated Amplifier, 290W Dynamic Power at 2 Ohms, 10Hz-100kHz Frequency Response, Silver removeYamaha A-S701 Integrated Amplifier, 290W Dynamic Power at 2 Ohms, 10Hz-100kHz Frequency Response, Black removeYamaha A-S801 Integrated Amplifier, 290W Dynamic Power at 2 Ohms, 10Hz-100kHz Frequency Response, Silver remove
Image
SKU889951000990696551054458027108948829027108948997027108948799027108948843
Rating
Price$388.14$459.51$636.26$565.56$565.56$636.26
Stock
Availability
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

About Onkyo A-9150

Integrated Stereo Amplifier Take Music Further with True Fidelity Building on acclaim for the award-winning A-9010, Onkyo again raises the bar for musicality in the entry class with its A-9150 Integrated Stereo Amplifier. Unique technologies coalesce around a refined amplification system to deliver outstanding transient response, superb dynamics, lifelike soundstaging, and nuanced articulation of your favorite analog or digital music. Key to this sense of realism is Discrete SpectraModule, which boasts a slew rate of more than 500 V/micros for flat linearity up to megahertz bandwidth. Rediscover the vitality of analog with MM/MC phono input served by dedicated equalizers on a separate circuit board, with custom head-amp operating in discrete configuration for MC signals. Listeners with big CD libraries will discover new life in the format with AKM's premium 768 kHz/32-bit DAC (AK4452) enhanced by DIDRC Filter, an original circuit technology that cleanses signals of high-frequency noise. Backed by 70 years' experience in hi-fi design, the A-9150 invites you inside the energy of every musical performance. Refined Power Amplification In order to deliver a clear and comfortable audio image, it's vital that sounds of different frequencies arrive at the listening position simultaneously. Power amplification circuits feature original topology that's carefully tuned for phase accuracy, wide-spectrum signal reproduction, and natural transient response. Fitted with hand-selected audio-grade parts, the amplifier contributes to lifelike and involving sound quality. Nuanced Musicality Delivered with Discrete SpectraModule Discrete SpectraModule boasts a slew rate of over 500 V/micros, significantly higher than competitive products that use a standard IC chip. High-voltage performance enables flat linearity into the megahertz range for full-bandwidth signal reproduction. This is important not only for natural transients expressing the nuances in music with freshness and vitality, but also for accurate definition of instruments ranged around a larger and more realistic soundstage. Dedicated MM/MC Phono Circuit Board The A-9150 makes your records sound better than ever. A gold-plated phono input supports signals from either MM or MC cartridges fitted to your choice of turntable. Separate phono circuit board has dedicated equalizers served by a top-quality customized head amp, which operates in discrete configuration for MC signals. Together with analog power amplification, this high-grade phono input design expresses the depth and vitality of music on vinyl. Customized High-Current Transformer and Custom Audio-Grade Capacitors Current has great influence on sound quality. High current is required for a better grip on the speaker transducers, improving control and accuracy. A customized high-output transformer and two huge custom capacitors inside the A-9150 deliver current through discrete output-stage transistors that are kept cool by an aluminum heat sink. Speakers react instantly, with throw-range precisely controlled for accurate articulation even through dynamic and complex musical passages. DIDRC Filter and Hi-Grade DAC for Natural Sound Distortion in the ultra-high-frequency spectrum can have a noticeable impact on the character of audible sound. Even the best D/A converters introduce some noise to the signal, and that noise is amplified, distorting the sound you hear. DIDRC Filter completely erases ultra-high-frequency noise. Performance is optimized for digital music with an undistorted frequency response extending far above the range of audibility. Combined with a premium 768 kHz/32-bit DAC, you can enjoy a greater sense of realism from digital sources, with none of the unnatural "synthesized" feeling sometimes produced by digital processing. Solid Build with High-grade Terminals A peek under the hood tells you what to expect from the A-9150. Held in place by a flat chassis that tames resonance, the digital audio board is isolated from the analog circuitry. L/R channels are symmetrical to equalize signal path-lengths and minimize stereo playback errors. Coaxial digital inputs, phono input, speaker posts, and RCA line inputs are gold-plated and of excellent quality. Finished with an aluminum front panel and volume control, the A-9150 presents as a component built to last.

Onkyo A-9150 Features

  • A-9150 Features:
  • Refined Power Amplification Circuitry with Discrete SpectraModule
  • Dedicated MM/MC Circuit Board and High Quality Discrete Head Amp
  • Natural Music Reproduction with Hi-Grade DAC and DIDRC Filter
  • Robust Flat Chassis
  • Quality Audio Terminals
  • Advanced Features:
  • 60 W/Ch (4 Ohm, 20 Hz-20 kHz, 0.08% THD, 2 Channels Driven, IEC)
  • Discrete SpectraModule Produces High Instantaneous Voltage for Immersive Soundstaging, Improved Instrument Separation, and Lively Transient Response
  • DIDRC Filter Prevents Ultra-high-frequency Distortion Affecting Audible Sound
  • High Current Power Supply Transformer and Two Hi-Grade Customized Capacitors
  • High-Current Low-Impedance Drive for Enhanced Speaker Control
  • Optimum Gain Volume Control Circuitry Isolates Signal from Noise Floor to Prevent Distortion at Lower Volume
  • Symmetrical L/R Channel Layout with Equal Signal-path Lengths to Minimize Stereo Playback Errors
  • Isolated Processing, Pre-amplification, and Power Amplification Circuitry Reduces Electrical Interference on Audio Signal
  • Large Extruded Aluminum Heat Sink
  • AKM (AK4452) 768 kHz/32-bit Digital-to-Analog Converter
  • Direct Mode for Reproduction Faithful to Original Source
  • Front-panel A/B Speaker Drive Selector
  • Available in Black or Silver Finish
  • Inputs and Connections Features:
  • 4x Gold-plated Analog RCA Audio Inputs (Rear)
  • 2x Optical Digital Inputs (192 kHz/24-bit Capable)
  • 2x Gold-plated Coaxial Digital Audio Inputs (192 kHz/24-bit Capable)
  • 2x Pairs of Gold-plated Speaker Posts (A+B)
  • Gold-plated Phono Input (MM/MC) to Suit Any Turntable
  • 6.3mm Headphone Jack
  • Gold-plated Main Input
  • Gold-plated Pre Out
  • RI (Remote Interactive) Remote Control Input
  • Additional Features:
  • Tone Controls (Bass/Treble/Balance)
  • Aluminum Front Panel and Aluminum Volume Control Knob
  • Rigid Steel Chassis to Reduce Resonance
  • Stable Isolator Feet Minimize Vibration-borne Interference
  • Efficient 0.2 W Power Consumption on Standby
  • Full-sized and Full-function RI Remote Control

Onkyo A-9150 Specifications


Amplifier

Power Output
60 W per channel @ 4 Ohms, 20 Hz to 20 kHz, 0.08% THD, 2 channels driven, FTC
THD & Noise
0.08% (20 Hz to 20 kHz, rated power)
Inputs
2x optical TOSLINK 2x digital coaxial 5x stereo RCA 1x stereo RCA phono with ground screw
Outputs
1x stereo RCA line out 1x stereo RCA pre-out 1x 1/4" (6.35mm) headphone (front)
Other Connectors
1x 1/8" (3.5mm) RI remote
Speaker Connectors
4x binding post pairs (A + B)
Input Sensitivity and Impedance
Line: 220 mV / 220 kOhms Phono MM: 4 mV / 47 kOhms Phono MC: 0.4 mV / 120 Ohms
Output Level and Impedance
RC: 0.2 V / 2.3 kOhms (Line Out) Phono Overload (MM): 70 mV / 1 kHz, 0.5% Phono Overload (MC): 7 mV / 1 kHz, 0.5%
Frequency Response
10 Hz to 100 kHz +1 dB / -3 dB (Line 1, Direct)
Tone Control
Bass: +/-10 dB (100 Hz) Treble: +/-10 dB (10 kHz)
Signal to Noise Ratio
Line 1, IHF-A: 107 dB Phono MM, IHF-A: 82 dB Phono MC, IHF-A: 73 dB
Speaker Impedance
A or B: 4 to 16 Ohms A + B: 8 to 16 Ohms

General

Power Supply
120 VAC, 60 Hz
Power Consumption
Active: 170 W Powered, No Sound: 35 W Standby: 0.15 W
Dimensions (W x H x D)
17.1 x 5.5 x 13.1" (435 x 139 x 331mm)
Weight
20.3 lb (9.2kg)
High sound quality network Hi-Fi receiver with support for DSD 5.6 MHz reproduction. Compatible with MusicCast and packed with network functions. Unlimited enjoyment of many different sound sources including high-resolution sources, smartphones and streaming services. Now with MusicCast, this device can be expanded to deliver wireless multi room audio playback, all controlled by a simple app. MusicCast MusicCast makes it easy to bring music to every room in your home wirelessly with playback controlled by a simple app. Start with a MusicCast capable AV receiver in your main entertainment room for the ultimate home theater experience, then add MusicCast speakers, sound bars or Hi-Fi components in other rooms wirelessly. All Your Content MusicCast allows you to access your digital music library, streaming music services and Internet radio, as well as Bluetooth sources, your TV sound and external sources attached to your AV receiver, such as a Blu-ray Disc player or CD player. Bluetooh Output for Convenient Music Streaming The R-N602 is equipped with Bluetooth functionality to let you easily enjoy wireless music playback from smartphones and other devices. The Compressed Music Enhancer from Yamaha is now optimized for Bluetooth audio transmissions to ensure that your music will have vivid, lively sound quality during wireless playback. Wireless Music Streaming via Bluetooth or AirPlay Enjoy music from your smartphone or tablet wirelessly using a Bluetooth connection. You can also use the convenient AirPlay function for wireless music streaming from iPhone or iPads. In addition, a Network Standby mode provides the convenience of having the R-N602 turn on and off automatically. Streaming Services Offer a Huge Range of Listening Choices Enjoy support for music streaming services like Pandora, Spotify, Rhapsody and SiriusXM Internet radio means you'll enjoy a wide variety of music content. Furthermore, support for the vTuner radio station database enables sampling of Internet radio broadcasts from around the world. Enjoy the Entire Spectrum of All Your Favorite Music Sources The R-N602 is a stereo receiver and network audio player in a single unit. You can use it to easily play audio downloaded from the Internet, stored on a PC or NAS system or enjoy streaming music services and Internet radio (with vTuner). Moreover, the MusicCast app from Yamaha allows you to enjoy your favorite tunes on a smartphone or tablet device via a wireless connection. Extensive Audio Codec and Format Support This network stereo receiver is compatible with high-resolution audio codecs such as DSD / AIFF / FLAC / WAV / Apple Lossless. You will enjoy the excellent sound quality of these various high-resolution audio codecs from the USB input on the front panel or from network connected devices. It uses a Burr-Brown 192 kHz / 24-bit DAC that has a firmly established reputation for quality. USB Digital Connection for iPod and iPhone on the Front Panel A USB port on the front panel allows convenient connection of an iPod and iPhone, which also charges the iOS device when connected. Because the digital signal from the iPod and iPhone is transmitted directly to the receiver, there is no signal-loss or interference. You get to enjoy the best possible sound quality. In addition, you can use the receiver's remote control unit to operate the iPod and iPhone for basic playback control. Gapless Playback Compatibility Allows Play without Interruption Many live and classical albums have no gaps in the music. Gapless playback ensures that there are no pauses between audio files. This provides playback with no interruptions, the way it was meant to be heard. ToP-ART Sound Quality Design and Highest Quality Parts Everything in the R-N602 has been built for maximum performance. The internal design utilizes simple, direct transmission of the signals - ensuring optimum separation and elimination of noise and distortion for pure sound reproduction. This includes dual independent power supplies for the two sound sources (analog and digital) as well as original ToP-ART (Total Purity Audio Reproduction Technology) and Art Base chassis construction to fully protect audio signals from noise and vibration. Moreover, all parts and materials have been carefully selected and tested to make sure they are of only the highest quality so that they all work together to provide the absolute best sound possible. Pure Direct Mode for Greater Sound Purity Engaging the Pure Direct switch causes the audio signal to bypass the control circuits for bass, treble, balance and the back buffer amp. This improves sound quality while maintaining full output capacity. Shortening the signal route improves sound purity, helping to reproduce even the most delicate musical nuances. Digital Audio Inputs for TV or Blu-ray Disc Players The R-N602 is equipped for digital audio inputs with both optical and coaxial terminals. The optical is for receiving audio from a TV and the coaxial for receiving audio from a Blu-ray Disc player. The audio stays in the digital domain, giving you pure, pristine dynamic sound for all your entertainment sources. Simple Yet Sophisticated Design With a beautifully simple and unique design inherited directly from Yamaha Hi-Fi audio components, the R-N602 also boasts an easy-to-operate button layout. The aluminum front panel has a richly textured silver hairline finish. The control knobs are also of the same luxurious construction as used on the top-end models. Both inside and out, everything about the R-N602 demonstrates their commitment to superior design quality and ease of use. ECO Mode and Auto Power Standby The R-N602 has an ECO mode that reduces power consumption by about 20% and an Auto Power Standby function that you can set to turn the power off after two, four, eight or 12 hours.
This product can only be shipped to U.S. addresses.
 

Yamaha R-N602 Receiver Features

  • MusicCast wireless multi room audio support
  • Bluetooth, built-in Wi-Fi and Wireless Direct
  • AirPlay, Pandora, Rhapsody, Spotify, SiriusXM Internet Radio music streaming services
  • DSD 2.8 MHz / 5.6 MHz, FLAC / WAV / AIFF 192 kHz / 24-bit, Apple Lossless 96 kHz / 24-bit playback
  • Front panel USB connection for digital docking with iPod / iPhone and USB flash drives
  • Pure Direct for greater sound purity
  • ToP-ART sound quality design with high quality parts
  • Digital audio inputs for TV or Blu-ray Disc players
  • Phono input (MM)
  • ECO mode and Auto Power Standby

Yamaha R-N602 Receiver Specifications

MusicCast
Yes
DLNA
Version 1.5
File Format
DSD 2.8 MHz / 5.6 MHz, FLAC / WAV / AIFF 192 kHz / 24-bit, Apple Lossless 96 kHz / 24-bit playback
Wi-Fi
Yes (with Wireless Direct)
AirPlay
Yes
Bluetooth
Yes (AAC)
Minimum RMS Output Power
80 W + 80 W (8 ohms, 20 Hz - 20 kHz, 0.04% THD)
Maximum Power (4 ohms)
105 W + 105 W
Maximum Power (8 ohms)
115 W + 115 W
High Dynamic Power / Ch (8/6/4/ 2 ohm)
105 / 125 / 150 / 178 W
Frequency Response
0 0.5 dB / 0 1.0 dB
Total Harmonic Distortion (CD to Sp Out)
0.015% (40 W / 8 ohms)
Signal-to-Noise Ratio (CD)
100 dB (Pure Direct on, 200 mV)
Audio In / Out
9/2
USB Input
iPod / iPhone, USB memory, portable audio player
Subwoofer Out
Yes
FM 50dB Quieting Sensitivity
3 microvolts (20.8 dBf)
FM Signal-to-Noise Ratio (Mono / Stereo)
65 dB / 64 dB
ToP-ART Technology
Yes
Standby Power Consumption
0.1 W
Dimensions
17-1/8 x 6 x 15-7/16" (43.5 x 15.2 x 39.1 cm)
Weight
21.6 lbs. (9.8 kg)

High Strength Chassis Contributes to High Density Sound and Pure Audio Reproduction

In order to effectively dampen the vibrations that have adverse effects on sound quality, the A-S801 chassis has a double bottom design with a 1 mm iron plate. In addition, the power transformer and heat sinks in the power amp section are supported by an extremely strong and stable ART (Anti-Resonance and Tough) base. A solid center bar further enhances high rigidity and dampens vibrations. These Yamaha design innovations contribute to superior signal to noise ratio with rich, natural sound reproduction.
High Strength Chassis Contributes to High Density Sound and Pure Audio Reproduction

High Quality Parts for Outstanding Audio Performance

Notice a custom made power transformer, custom made block capacitors, two direct signal path speaker relays, one point grounding system, extruded aluminum heat sinks and other top quality parts to effortlessly handle demanding audio conditions. The quality of each individual part, as well as how they work together, basically determines the sound quality of this component. Yamaha uses only very high quality parts, carefully selected and tested for their sound properties.
High Quality Parts for Outstanding Audio Performance

Digital Audio Input for TV and/or Blu-ray Discâ„¢ Player

The A-S801 is equipped for digital audio inputs with an optical and digital coaxial input terminal. The optical is for receiving audio from a TV and the coaxial for receiving audio from a Blu-ray Disc player. The audio stays in the digital domain giving you pure, pristine and dynamic sound for all your entertainment sources.
Digital Audio Input for TV and/or Blu-ray Discâ„¢ Player

CD Direct Amplification and Pure Direct Mode for Greater Sound Purity

With a straight connection to the CD input, CD Direct Amplification maximizes the CD sources signal-to-noise ratio. Additionally, engaging the Pure Direct mode causes the music signals to travel the shortest possible circuit route, bypassing the buffer amp, the tone, loudness and balance controls to virtually eliminate any signal degradation for the purest sound quality.
CD Direct Amplification and Pure Direct Mode for Greater Sound Purity

Continuous Variable Loudness Control

The A-S801 also features a new analog loudness control on the front panel that uses electronic volume for higher sound quality which lets you adjust the loudness effect as desired. Separate from the overall volume, this controls the balance of the low and high frequencies providing full tonal range at any volume level by compensating for the natural loss in the human ear at soft levels.
Continuous Variable Loudness Control

Gold Plated Terminals

Gold plated terminals ensure a high quality connection that prevents signal loss. The A-S801 has gold plated speaker and input terminals.
Gold Plated Terminals

Simple Yet Sophisticated Design

With a beautiful, simple and unique design inherited directly from Yamaha Hi-Fi audio components, this amplifier also boasts an easy to operate layout. The aluminum front panel has a richly textured silver hairline finish. The control knobs are also of the same luxurious construction as used on our top end models.

Yamaha A-S801 Specifications

Minimum RMS Output Power
8 Ohms:100 W + 100 W (0.019% THD) 6 Ohms: 120 W + 120 W (0.038% THD)
High Dynamic Power/Channel
140 / 170 / 220 / 290 W at 8 / 6 / 4 / 2 Ohms
Maximum power per channel
160 W
EC power 1 kHz, 0.019% THD, 8 Ohms
115 W
Power band width 0.04% THD, 50 W, 8 Ohms
10 Hz to 50 kHz
Maximum effective output power
145 W
Input sensitivity/Input impedance
3.0 mV/47 kOhmss
Maximum input signal
Phono(MM) (1 kHz, 0.03% THD): 45 mV or more CD, etc. (1 kHz, 0.5% THD):2.2 V or more
Output level/Output impedance
REC OUT: 200 mV/1.0 kOhmss or less SUBWOOFER OUT: 3.5 V/1.2 kOhmss
PHONES jack rated output/Impedance
470 mV/470 Ohms
Frequency response
CD, etc. (20 Hz to 20 kHz): 0 +/- 0.5 dB CD, etc. PURE DIRECT on (10 Hz to 100 kHz): 0 +/- 1.0 dB
RIAA equalization deviation
PHONO (MM): +/- 0.5 dB
Total harmonic Phono (MM) to REC OUT
(20 Hz to 20 kHz, 2.5 V): 0.03% or less CD, etc. to SPEAKERS(20 Hz to 20 kHz, 50 W, 8 Ohms): 0.019% or less
Signal to noise ratio (IHF-A network)
PHONO (MM) (5 mV input shorted): 82 dB or more CD, etc. PURE DIRECT on (200 mV input shorted): 99 dB or more CD DIRECT AMP on: 104 dB or more
Residual noise (IHF-A network)
40 uV
Channel separation
CD, etc. (5.1 kOhmss input shorted, 1 kHz): 65 dB or more CD, etc. (5.1 kOhmss input shorted, 10 KHz): 50 dB or more
Bass
Boost/Cut (20 Hz): +/-10 dB Turnover frequency: 400 Hz
Treble
Boost/Cut (20 kHz): +/-10 dB Turnover frequency: 3.5 kHz
Continuous loudness control
Attenuation (1 kHz): -30 dB
USB (Type B)
Supported USB2.0
Supported digital audio format
PCM (2-ch): 192/176.4/96/88.2/48/44.1/32 kHz
Supported digital audio format (USB)
PCM (2-ch): 384/352.8/192/176.4/96/88.2/48/44.1 kHz DSD: 2.8224/5.6448 MHz
PCM word depth
32/24/16 bit
Power supply
AC 120 V, 60 Hz
Damping Factor
240
Total Harmonic Distortion (CD to Sp Out)
0.019% (50 W / 8 Ohms)
Signal-to-Noise Ratio (CD)
99 dB (input shorted, 200 mV)
Audio In / Out
8 / 2
Digital Input
Yes (optical / coaxial)
USB Input
Yes (type B)
Subwoofer Out
Yes
DC out
Yes
Pure Direct
Yes
ToP-ART
Yes
Switchable CD Direct Amplification
Yes
Standby Power Consumption
0.5 W
Power Management (Auto Power Standby)
Yes
Dimensions (W x H x D)
17.12 x 6 x 15.25" / 434.84 x 152.4 x 387.35mm
Weight
26.7lbs / 12.11kg
The Yamaha A-S701 Integrated Silver Amplifier is designed for pure sound quality and outstanding drive power. An integrated amplifier with the advantage of analog and digital inputs. High Quality Circuit Design Based on the ToP-ART (Total Purity Audio Reproduction Technology) Concept The amplifier design technology from Yamaha is called ToP-ART, which features an input to output with a direct symmetrical design. ToP-ART design and ART Base ensure optimum sound when processing and transmitting the audio signal. The signal is simple and direct, so therefore it is less likely to be affected by noise and distortion. The left and right channels are organized in a straight, symmetrical layout for the highest signal purity. In addition, the ART (Anti-Resonance and Tough) Base bottom chassis and a solid center bar provide high rigidity support and dampers vibration. These design innovations contribute to this amplifier's rich audio reproduction with abundant musicality. High Quality Parts for Outstanding Audio Performance Notice the custom-made power transformer, custom-made block capacitors, two direct signal path speaker relays, one point grounding system, extruded aluminum heat sinks and other top-quality parts to effortlessly handle demanding audio conditions. The quality of each individual part, as well as how they work together, basically determines the sound quality of this component. Yamaha uses only very high quality parts, carefully selected and tested for their sound properties. Created by Rich Experience, Tradition and High Technological Expertise Yamaha, with a long history of over 125 years as a musical instrument maker, also has a high reputation for Hi-Fi components. The A-S301 is created by taking advantage of this rich experience and high technological expertise. Based on the concept of "Natural Sound" for reproducing all music as it really sounds, this amplifier is built with scrupulous care from its circuit design to basic sound production CD Direct Amplification and Pure Direct Mode for Greater Sound Purity With a straight connection to the CD input, CD Direct Amplification maximizes the CD source's signal to noise ratio. Additionally, engaging the Pure Direct mode causes the music signals to travel the shortest possible circuit route, bypassing the buffer amp, the tone, loudness and balance controls to virtually eliminate any signal degradation for the purest sound quality.. Continuously Variable Loudness Control The A-S301 also features a new analog loudness control on the front panel that uses electronic volume for higher sound quality, which lets you adjust the loudness effect as desired. Separate from the overall volume, this controls the balance of the low and high frequencies, providing full tonal range at any volume level by compensating for the natural loss in the human ear at soft levels. Gold Plated Terminals Gold plated terminals ensure a high quality connection that prevents signal loss. The A-S501 has gold plated speaker and input terminals. Digital Audio Input for TV and/or Blu-ray Disc Player The A-S301 is equipped for digital audio inputs with an optical and digital coaxial input terminal. The optical is for receiving audio from a TV and the coaxial for receiving audio from a Blu-ray Disc player. The audio stays in the digital domain, giving you pure, pristine and dynamic sound for all of your entertainment sources. Connection for YBA-11 Bluetooth Wireless Adapter (Optional Accessory) With the YBA-11, you'll be able to stream music wirelessly from a Bluetooth compatible mobile phone or a PC. Thanks to the digital coaxial connection and the aptx audio coding algorithm, you will enjoy wireless music streaming with optimum sound quality. You can also conveniently power the YBA-11 via the DC out connection on the rear panel of this amplifier. Speaker A, B or A+B Selection and Speaker Terminals for Two Systems You can connect two separate speaker systems and hear them in different rooms at the same time. There are four terminals, so by just rotating a simple selector dial, you can switch between the two pairs of speakers to play the selected source. Subwoofer Terminal A terminal for connecting a subwoofer is provided, allowing you to increase the bass output of your system for a more powerful sound with better overall sound quality. Phono Moving Magnet Input Terminal You can connect a turntable with a MM phono cartridge to play vinyl records. Get the best of both worlds whether listening to analog vinyl or the latest digital technology. Simple Yet Sophisticated Design With a beautiful, simple and unique design inherited directly from Yamaha Hi-Fi audio components, this amplifier also boasts an easy to operate layout. The aluminum front panel has a richly textured silver hairline finish. The control knobs are also of the same luxurious construction as used on top end models. Remote Control with Clean, Simple Design The clean, simple design of the remote control provides easy to understand operation with a single hand. The design makes it simple to adjust inputs, volume and more. The unit has a sophisticated looking hairline finish that matches the design of the amplifiers. You can also use the remote to control a Yamaha CD player. Rotary Encoder Input Selector with LEDs The rotary encoder makes it quick and easy to select input sources. The luxurious hairline finish offers a nice tactile feeling. LEDs clearly show which source is selected, so you can easily switch sources, even in a dark room. Auto Power Standby Function When Auto Power Standby is engaged, the amplifier will automatically shift itself into standby mode when a user function has not been executed in eight hours. This is a great function if you forget to turn the amplifier off and it will help minimize power consumption when the unit is not in use.
This product can only be shipped to U.S. addresses.

Yamaha A-S701 Specifications

Minimum RMS Output Power
8 Ohms: 100 W + 100 W (0.019% THD) 6 Ohms: 120 W + 120 W (0.038% THD)
High Dynamic Power/Channel
140 / 170 / 220 / 290 W at 8 / 6 / 4 / 2 Ohms
Frequency Response
10 Hz - 100 kHz +/- 1.0 dB
Maximum power per channel
1 kHz, 0.7% THD, 4 Ohms: 160 W
IEC power
1 kHz, 0.019% THD, 8 Ohms: 115W
Power band width
0.04% THD, 50 W, 8 Ohms: 10 Hz to 50 kHz
Maximum Effective Output Power
1 kHz, 10% THD, 6 Ohms: 170 W
Input sensitivity/Input impedance
PHONO (MM): 3.0 mV/47 kOhmss CD, etc: 200 mV/47 kOhmss
Maximum input signal
PHONO (MM) (1 kHz, 0. 03%THD): 45 mV or more CD etc. (1 kHz, 0.5% THD): 2.2 V or more
Output level/Output impedance
REC OUT: 200 mV/1.0 kOhmss or less SUBWOOFER OUT: 3.5 V/1.2 kOhmss
Phones jack rated output/Impedance
CD, etc. (Input 1 kHz, 200 mV, 8 Ohms: 470 mV/470 Ohms
RIAA equalization deviation
PHONO (MM): +/- 0.5 dB
Channel separation
CD, etc. (5.1 kOhmss input shorted,1kHz): 65 dB or more CD, etc. (5.1 kOhmss input shorted,10 kHz): 50 dB or more
Bass
Boost/Cut (20 Hz): +/- 10 dB Turnover frequency: 400 Hz
Treble
Boost/Cut (20 Hz): +/- 10 dB Turnover frequency: 3.5 kHz
Continuous loudness control
- 30 dB
PCM word depth
24 bit/16 bit
Power supply
AC 120 V, 60 Hz
Power consumption
270 W
Standby power consumption
0.5 W
Maximum power consumption
580 W
Total Harmonic Distortion (CD to Sp Out)
0.019% (50 W / 8 Ohms)
Signal-to-Noise Ratio (CD)
99 dB (input shorted, 200 mV)
Damping Factor
240
Digital Input
Yes (optical / coaxial)
Audio In / Out
8 / 2
Subwoofer Out
Yes
Pure Direct
Yes
ToP-ART
Yes
Switchable CD Direct Amplification
Yes
DC out
Yes
Standby Power Consumption
0.5 W
Power Management (Auto Power Standby)
Yes
Dimensions (W x H x D)
17.12 x 6 x 15.25" / 434.84 x 152.4 x 387.35mm
Weight
24.7lbs / 11.20kg
The Yamaha A-S701 Integrated Black Amplifier is designed for pure sound quality and outstanding drive power. An integrated amplifier with the advantage of analog and digital inputs. High Quality Circuit Design Based on the ToP-ART (Total Purity Audio Reproduction Technology) Concept The amplifier design technology from Yamaha is called ToP-ART, which features an input to output with a direct symmetrical design. ToP-ART design and ART Base ensure optimum sound when processing and transmitting the audio signal. The signal is simple and direct, so therefore it is less likely to be affected by noise and distortion. The left and right channels are organized in a straight, symmetrical layout for the highest signal purity. In addition, the ART (Anti-Resonance and Tough) Base bottom chassis and a solid center bar provide high rigidity support and dampers vibration. These design innovations contribute to this amplifier's rich audio reproduction with abundant musicality. High Quality Parts for Outstanding Audio Performance Notice the custom-made power transformer, custom-made block capacitors, two direct signal path speaker relays, one point grounding system, extruded aluminum heat sinks and other top-quality parts to effortlessly handle demanding audio conditions. The quality of each individual part, as well as how they work together, basically determines the sound quality of this component. Yamaha uses only very high quality parts, carefully selected and tested for their sound properties. Created by Rich Experience, Tradition and High Technological Expertise Yamaha, with a long history of over 125 years as a musical instrument maker, also has a high reputation for Hi-Fi components. The A-S301 is created by taking advantage of this rich experience and high technological expertise. Based on the concept of "Natural Sound" for reproducing all music as it really sounds, this amplifier is built with scrupulous care from its circuit design to basic sound production CD Direct Amplification and Pure Direct Mode for Greater Sound Purity With a straight connection to the CD input, CD Direct Amplification maximizes the CD source's signal to noise ratio. Additionally, engaging the Pure Direct mode causes the music signals to travel the shortest possible circuit route, bypassing the buffer amp, the tone, loudness and balance controls to virtually eliminate any signal degradation for the purest sound quality.. Continuously Variable Loudness Control The A-S301 also features a new analog loudness control on the front panel that uses electronic volume for higher sound quality, which lets you adjust the loudness effect as desired. Separate from the overall volume, this controls the balance of the low and high frequencies, providing full tonal range at any volume level by compensating for the natural loss in the human ear at soft levels. Gold Plated Terminals Gold plated terminals ensure a high quality connection that prevents signal loss. The A-S501 has gold plated speaker and input terminals. Digital Audio Input for TV and/or Blu-ray Disc Player The A-S301 is equipped for digital audio inputs with an optical and digital coaxial input terminal. The optical is for receiving audio from a TV and the coaxial for receiving audio from a Blu-ray Disc player. The audio stays in the digital domain, giving you pure, pristine and dynamic sound for all of your entertainment sources. Connection for YBA-11 Bluetooth Wireless Adapter (Optional Accessory) With the YBA-11, you'll be able to stream music wirelessly from a Bluetooth compatible mobile phone or a PC. Thanks to the digital coaxial connection and the aptx audio coding algorithm, you will enjoy wireless music streaming with optimum sound quality. You can also conveniently power the YBA-11 via the DC out connection on the rear panel of this amplifier. Speaker A, B or A+B Selection and Speaker Terminals for Two Systems You can connect two separate speaker systems and hear them in different rooms at the same time. There are four terminals, so by just rotating a simple selector dial, you can switch between the two pairs of speakers to play the selected source. Subwoofer Terminal A terminal for connecting a subwoofer is provided, allowing you to increase the bass output of your system for a more powerful sound with better overall sound quality. Phono Moving Magnet Input Terminal You can connect a turntable with a MM phono cartridge to play vinyl records. Get the best of both worlds whether listening to analog vinyl or the latest digital technology. Simple Yet Sophisticated Design With a beautiful, simple and unique design inherited directly from Yamaha Hi-Fi audio components, this amplifier also boasts an easy to operate layout. The aluminum front panel has a richly textured silver hairline finish. The control knobs are also of the same luxurious construction as used on top end models. Remote Control with Clean, Simple Design The clean, simple design of the remote control provides easy to understand operation with a single hand. The design makes it simple to adjust inputs, volume and more. The unit has a sophisticated looking hairline finish that matches the design of the amplifiers. You can also use the remote to control a Yamaha CD player. Rotary Encoder Input Selector with LEDs The rotary encoder makes it quick and easy to select input sources. The luxurious hairline finish offers a nice tactile feeling. LEDs clearly show which source is selected, so you can easily switch sources, even in a dark room. Auto Power Standby Function When Auto Power Standby is engaged, the amplifier will automatically shift itself into standby mode when a user function has not been executed in eight hours. This is a great function if you forget to turn the amplifier off and it will help minimize power consumption when the unit is not in use.
This product can only be shipped to U.S. addresses.

Yamaha A-S701 Specifications

Minimum RMS Output Power
8 Ohms: 100 W + 100 W (0.019% THD) 6 Ohms: 120 W + 120 W (0.038% THD)
High Dynamic Power/Channel
140 / 170 / 220 / 290 W at 8 / 6 / 4 / 2 Ohms
Frequency Response
10 Hz - 100 kHz +/- 1.0 dB
Maximum power per channel
1 kHz, 0.7% THD, 4 Ohms: 160 W
IEC power
1 kHz, 0.019% THD, 8 Ohms: 115W
Power band width
0.04% THD, 50 W, 8 Ohms: 10 Hz to 50 kHz
Maximum Effective Output Power
1 kHz, 10% THD, 6 Ohms: 170 W
Input sensitivity/Input impedance
PHONO (MM): 3.0 mV/47 kOhmss CD, etc: 200 mV/47 kOhmss
Maximum input signal
PHONO (MM) (1 kHz, 0. 03%THD): 45 mV or more CD etc. (1 kHz, 0.5% THD): 2.2 V or more
Output level/Output impedance
REC OUT: 200 mV/1.0 kOhmss or less SUBWOOFER OUT: 3.5 V/1.2 kOhmss
Phones jack rated output/Impedance
CD, etc. (Input 1 kHz, 200 mV, 8 Ohms: 470 mV/470 Ohms
RIAA equalization deviation
PHONO (MM): +/- 0.5 dB
Channel separation
CD, etc. (5.1 kOhmss input shorted,1kHz): 65 dB or more CD, etc. (5.1 kOhmss input shorted,10 kHz): 50 dB or more
Bass
Boost/Cut (20 Hz): +/- 10 dB Turnover frequency: 400 Hz
Treble
Boost/Cut (20 Hz): +/- 10 dB Turnover frequency: 3.5 kHz
Continuous loudness control
- 30 dB
PCM word depth
24 bit/16 bit
Power supply
AC 120 V, 60 Hz
Power consumption
270 W
Standby power consumption
0.5 W
Maximum power consumption
580 W
Total Harmonic Distortion (CD to Sp Out)
0.019% (50 W / 8 Ohms)
Signal-to-Noise Ratio (CD)
99 dB (input shorted, 200 mV)
Damping Factor
240
Digital Input
Yes (optical / coaxial)
Audio In / Out
8 / 2
Subwoofer Out
Yes
Pure Direct
Yes
ToP-ART
Yes
Switchable CD Direct Amplification
Yes
DC out
Yes
Standby Power Consumption
0.5 W
Power Management (Auto Power Standby)
Yes
Dimensions (W x H x D)
17.12 x 6 x 15.25" / 434.84 x 152.4 x 387.35mm
Weight
24.7lbs / 11.20kg
The Yamaha A-S801 Integrated Silver Amplifier is designed for USB DAC functionality coupled with high fidelity. ToP-ART circuitry, Pure Direct, refined construction and stunningly good looks offer superior musicality with rich, natural sound. High Sound Quality Circuit Design Based on the ToP-ART (Total Purity Audio Reproduction Technology) Concept ToP-ART Design and ART Base ensure optimum sound when processing and transmitting the audio signal. The signal is simple and direct, therefore it is less likely to be affected by noise and distortion. The left and right channels are organized in a straight, symmetrical layout for the highest signal purity. High Strength Chassis Contributes to High Density Sound and Pure Audio Reproduction In order to effectively dampen the vibrations that have adverse effects on sound quality, the A-S801 chassis has a double bottom design with a 1 mm iron plate. In addition, the power transformer and heat sinks in the power amp section are supported by an extremely strong and stable ART (Anti-Resonance and Tough) base. A solid center bar further enhances high rigidity and dampens vibrations. These Yamaha design innovations contribute to superior signal to noise ratio with rich, natural sound reproduction. High Quality Parts for Outstanding Audio Performance Notice the custom-made power transformer, custom-made block capacitors, two direct signal path speaker relays, one point grounding system, extruded aluminum heat sinks and other top-quality parts to effortlessly handle demanding audio conditions. The quality of each individual part, as well as how they work together, basically determines the sound quality of this component. Yamaha uses only very high quality parts, carefully selected and tested for their sound properties. USB DAC Function Supports Native DSD (2.8 MHz / 5.6 MHz) and PCM (384 kHz / 32-bit) Resolutions The USB DAC function supports native DSD (2.8 MHz and 5.6 MHz) and PCM (384 kHz / 32-bit ) resolutions. This function allows for a direct connection to PCs which opens the door to play back of the highest resolution audio content offered today. The Yamaha-developed USB device controller has its own master clock that eliminates PC jitter. The driver is a low loss, high throughput ASIO 2.3 Yamaha Steinberg USB driver. During playback, indicators on the front panel clearly show which sampling frequencies are currently being used. Exceptionally High Performance 32-bit D/A Converter After careful listening evaluations, Yamaha selected the 32-bit, 2-channel SABRE Premier Audio DAC from ESS Technology, Inc. Most notable is its high precision processing power of 32-bit audio along with the ability to handle large amounts of audio data with full PCM 384 kHz and native DSD 5.6 MHz. Since the built-in D/A converter generates its own master clock, an original jitter elimination function is also included, permitting D/A conversion with an extremely low impact of clock jitter. Moreover, a 2-channel D/A converter is housed inside the chip which applies a double differential operation. The result is exceptional high performance and high quality signal output with a superior signal to noise ratio. Digital Audio Input for TV and/or Blu-ray Disc Player The A-S801 is equipped for digital audio inputs with an optical and digital coaxial input terminal. The optical is for receiving audio from a TV and the coaxial for receiving audio from a Blu-ray Disc player. The audio stays in the digital domain giving you pure, pristine and dynamic sound for all your entertainment sources. CD Direct Amplification and Pure Direct Mode for Greater Sound Purity With a straight connection to the CD input, CD Direct Amplification maximizes the CD sources signal-to-noise ratio. Additionally, engaging the Pure Direct mode causes the music signals to travel the shortest possible circuit route, bypassing the buffer amp, the tone, loudness and balance controls to virtually eliminate any signal degradation for the purest sound quality. Continuous Variable Loudness Control The A-S801 also features a new analog loudness control on the front panel that uses electronic volume for higher sound quality which lets you adjust the loudness effect as desired. Separate from the overall volume, this controls the balance of the low and high frequencies providing full tonal range at any volume level by compensating for the natural loss in the human ear at soft levels. Gold Plated Terminals Gold plated terminals ensure a high quality connection that prevents signal loss. The A-S501 has gold plated speaker and input terminals. Subwoofer Terminal A terminal for connecting a subwoofer is provided, allowing you to increase the bass output of your system for a more powerful sound with better overall sound quality. Phono Moving Magnet Input Terminal You can connect a turntable with a MM phono cartridge to play vinyl records. Get the best of both worlds whether listening to analog vinyl or the latest digital technology. Simple Yet Sophisticated Design With a beautiful, simple and unique design inherited directly from Yamaha Hi-Fi audio components, this amplifier also boasts an easy to operate layout. The aluminum front panel has a richly textured silver hairline finish. The control knobs are also of the same luxurious construction as used on top end models. Remote Control with Clean, Simple Design The clean, simple design of the remote control provides easy to understand operation with a single hand. The design makes it simple to adjust inputs, volume and more. The unit has a sophisticated looking hairline finish that matches the design of the amplifiers. You can also use the remote to control a Yamaha CD player. Rotary Encoder Input Selector with LEDs The rotary encoder makes it quick and easy to select input sources. The luxurious hairline finish offers a nice tactile feeling. LEDs clearly show which source is selected, so you can easily switch sources, even in a dark room. Connection for YBA-11 Bluetooth Wireless Adapter With the YBA-11, you'll be able to stream music wireless from a Bluetooth compatible mobile phone or a PC. Thanks to the digital coaxial connection and the aptx audio coding algorithm, you'll enjoy wireless music streaming with optimum sound quality. You can also conveniently power the YBA-11 via the DC out connection on the rear panel of this amplifier. Auto Power Standby Function When Auto Power Standby is engaged, the amplifier will automatically shift itself into standby mode when a user function has not been executed in eight hours. This is a great function if you forget to turn the amplifier off and it will help minimize power consumption when the unit is not in use.
This product can only be shipped to U.S. addresses.

Yamaha A-S801 Specifications

Minimum RMS Output Power
8 Ohms:100 W + 100 W (0.019% THD) 6 Ohms: 120 W + 120 W (0.038% THD)
High Dynamic Power/Channel
140 / 170 / 220 / 290 W at 8 / 6 / 4 / 2 Ohms
Maximum power per channel
160 W
EC power 1 kHz, 0.019% THD, 8 Ohms
115 W
Power band width 0.04% THD, 50 W, 8 Ohms
10 Hz to 50 kHz
Maximum effective output power
145 W
Input sensitivity/Input impedance
3.0 mV/47 kOhmss
Maximum input signal
Phono(MM) (1 kHz, 0.03% THD): 45 mV or more CD, etc. (1 kHz, 0.5% THD):2.2 V or more
Output level/Output impedance
REC OUT: 200 mV/1.0 kOhmss or less SUBWOOFER OUT: 3.5 V/1.2 kOhmss
PHONES jack rated output/Impedance
470 mV/470 Ohms
Frequency response
CD, etc. (20 Hz to 20 kHz): 0 +/- 0.5 dB CD, etc. PURE DIRECT on (10 Hz to 100 kHz): 0 +/- 1.0 dB
RIAA equalization deviation
PHONO (MM): +/- 0.5 dB
Total harmonic Phono (MM) to REC OUT
(20 Hz to 20 kHz, 2.5 V): 0.03% or less CD, etc. to SPEAKERS(20 Hz to 20 kHz, 50 W, 8 Ohms): 0.019% or less
Signal to noise ratio (IHF-A network)
PHONO (MM) (5 mV input shorted): 82 dB or more CD, etc. PURE DIRECT on (200 mV input shorted): 99 dB or more CD DIRECT AMP on: 104 dB or more
Residual noise (IHF-A network)
40 uV
Channel separation
CD, etc. (5.1 kOhmss input shorted, 1 kHz): 65 dB or more CD, etc. (5.1 kOhmss input shorted, 10 KHz): 50 dB or more
Bass
Boost/Cut (20 Hz): +/-10 dB Turnover frequency: 400 Hz
Treble
Boost/Cut (20 kHz): +/-10 dB Turnover frequency: 3.5 kHz
Continuous loudness control
Attenuation (1 kHz): -30 dB
USB (Type B)
Supported USB2.0
Supported digital audio format
PCM (2-ch): 192/176.4/96/88.2/48/44.1/32 kHz
Supported digital audio format (USB)
PCM (2-ch): 384/352.8/192/176.4/96/88.2/48/44.1 kHz DSD: 2.8224/5.6448 MHz
PCM word depth
32/24/16 bit
Power supply
AC 120 V, 60 Hz
Damping Factor
240
Total Harmonic Distortion (CD to Sp Out)
0.019% (50 W / 8 Ohms)
Signal-to-Noise Ratio (CD)
99 dB (input shorted, 200 mV)
Audio In / Out
8 / 2
Digital Input
Yes (optical / coaxial)
USB Input
Yes (type B)
Subwoofer Out
Yes
DC out
Yes
Pure Direct
Yes
ToP-ART
Yes
Switchable CD Direct Amplification
Yes
Standby Power Consumption
0.5 W
Power Management (Auto Power Standby)
Yes
Dimensions (W x H x D)
17.12 x 6 x 15.25" / 434.84 x 152.4 x 387.35mm
Weight
26.7lbs / 12.11kg
Weight
DimensionsN/AN/AN/AN/AN/AN/A
Additional information