| Content |
Massive THX sound and Film-Like 8K resolution
Rigorously tested to receive the coveted THX Select Certification, the Onkyo TX-NR6100 7.2-Channel AV Receiver delivers precision sound and images.
With an emphasis on an enhanced gaming experience, own your opponents with HDMI 2.1 enhancements for gamers: 4K/120Hz HDR pass-through enables ultra-fast motion -VRR (Variable Refresh Rate) eliminates lag, stutter, and frame-tearing for fluid gameplay. - ALLM (Auto Low Latency Mode) optimizes latency from source to screen - QFT (Quick Frame Transport) limits lag for a smoother experience.
Setting the bar for reference sound while bringing 8K video to your compatible display over HDMI 2.1, you can enjoy Dolby Atmos and DTS: X soundtracks through your height-enabled surround system or use upmixing and virtualization solutions from DTS and Dolby to create a 3D sound-field from any layout.
Featuring three HDMI outputs and 100 watts of power per channel, the TX-NR6100 AV receiver delivers uncompressed HDMI 2.1 8K 60Hz and 4K/120Hz with HDR over 40 gbps, increasing the bandwidth over its predecessors. This SMART AV Receiver delivers an unparalleled movie, music, and gaming experience to your living room.
HDMI 2.1 with 8K
HDMI 2.1 is the most recent update of the HDMI spec and supports eARC, a range of higher video resolutions and refresh rates including 8K60 and 4K120, and Dynamic HDR formats. 8K delivers a super-immersive viewing experience with 2x the horizontal and vertical resolution of 4K, and 4 times as many pixels; and combined with 60Hz refresh rate enables smooth and sharp viewing of content with high-speed action. HDMI 2.1 with 8K and eARC ensures your system is ready for the clearest and cleanest picture available both now and down the road.
Ultimate 4K Gaming Experience
Own your opponents with HDMI 2.1 enhancements for gamers: 4K/120Hz HDR pass-through enables ultra-fast motion -VRR (Variable Refresh Rate) eliminates lag, stutter, and frame-tearing for fluid gameplay. - ALLM (Auto Low Latency Mode) optimizes latency from source to screen - QFT (Quick Frame Transport) limits lag for a smoother experience.
THX Certified
In 1993, Onkyo became the first consumer electronics brand to be THX-certified. With literally thousands of tests, before earning the THX-certification logo: no matter what input is used, no matter what combination of the many built-in features for the AVR, preamplifier, or amplifier, there can be absolutely nothing added, nothing taken away from the source material.
Built-In Streaming Services
Access to Spotify, TIDAL, Deezer, TuneIn, and Pandora are built into the system. Use dedicated apps (where available) or the free Onkyo Control App for Apple and Android devices to find and play music.
Discrete Zone 2 HDMI Switching
Set up different Ultra High-Definition entertainment options with up to 8K60 resolution* in two different rooms from your Onkyo receiver. Watch a movie in the home theater, while the kids watch cartoons in their playroom.
Smart Home Compatible with Voice Control
Onkyo receivers easily integrate into your existing Smart Home ecosystem, including Apple Airplay, Alexa, Google apps, and more. You get a highly capable and compatible network device that can operate seamlessly in your multi-room ecosystem.
Works with SONOS Certified
This receiver can join your existing Sonos Home Sound System, or be the start of a new one, just by pairing it with a Sonos Port. This works with Sonos Certified AVR offers a best-in-class tie-in to the Sonos ecosystem, waking, changing inputs, and playing at the volume you want using the Sonos Volume-Pass Through feature from the Sonos app.
Bi-Directional Bluetooth Wireless Technology
This Onkyo AVR can send and receive audio via Bluetooth wireless technology. Stream from your device to the receiver using SBC or AAC codecs, or transmit audio playing through the AVR to compatible wireless headphones using SBC, aptX, or aptX HD codecs including 24-bit audio over aptX HD. The improved data transfer capabilities of the latest generation of Bluetooth ensure clear and reliable sound reproduction so you hear your favorite songs just as the recording engineer intended.
Ready for DTS PLAY-FI
DTS Play-Fi allows you to enjoy high-quality music from connected online services, networked media servers, and your device library over Wi-Fi to any number of compatible products using the Onkyo Music Control App for iPad, iPhone, and Android smartphones/tablets. DTS Play-Fi can synchronize the music in every room. Each member of your family can use their own device to listen to their music in a room or group of rooms. DTS Play-Fi lets you structure a comprehensive multi-room ecosystem that satisfies virtually any need.
- 8K with HDMI 2.1 40Gbps (3 ins)
- THX Select Certification
- Discrete Zone 2 Audio and Video
- 210 W/Ch THX Certified Select Dynamic Audio Amplification system
- 5.2.2-channel Dolby Atmos and DTS:X playback
- AccuReflex phase-matching solution for Atmos-enabled speakers
- SMART AV Receiver
- Works with Hey Google or Alexa
- Stream over 5 GHz/2.4 GHz dual-band Wi-Fi supporting the 802.11ac standard
- HDMI Sub/Zone 2 Out for media transmission to a second display
- Send or receive audio via Bluetooth wireless technology
- Refined chassis, HDMI board, DAC, Digital/Analog inputs, power-amp grounds and power lines
- 5.2-ch Main + Powered Zone 2 speakers support synced/independent D/A audio playback
- Zone 2/Zone B line-out
- Power Output (All Channels)
- 210 W/Ch (6 ohms, 1 kHz, 10% THD,1-ch driven)
100 W/Ch (8 ohms, 20 Hz-20 kHz, 0.08% THD, 2-ch driven, FTC)
- Dynamic Power
- 240 W (3 ohms, Front) 210 W (4 ohms, Front)
120 W (8 ohms, Front)
- THD+N (Total Harmonic Distortion+Noise)
- 0.08% (20 Hz-20 kHz, half Power)
- Input Sensitivity and Impedance
- 200 mV rms/47 k-ohms (Line) 3.5 mV rms/47 k-ohms (Phono MM)
- Rated RCA Output Level and Impedance
- 1 V rms/470 ohms (Subwoofer pre-out) 200 mV rms/470 ohms (Zone 2/Zone B line-out)
- Frequency Response
- 10 Hz-100 kHz/+1 dB, -3 dB (Direct/Pure Audio)
- Tone Control
- +/-10 dB, 20 Hz (Bass) +/-10 dB, 20 kHz (Treble)
- Signal-to-Noise Ratio
- 106 dB (Line, IHF-A) 80 dB (Phono, IHF-A)
- Speaker Impedance
- 4-16 ohms
- FM
- 87.5 MHz-107.9 MHz
- AM
- 530 kHz-1,710 kHz
- FM/AM Preset Memory
- 40 stations
- Power Supply
- AC 120 V-, 60 Hz
- Power Consumption
- Operating: 635 W
Idle: 65 W
Standby: 0.1 W
- Dimensions (W x H x D)
- 17.12 x 6.8 x 14.94" (435 x 173.5 x 379.5mm)
- Weight
- 21.7 lbs (9.8kg)
|
Designed for integration, with rack-mountable design, 100 IWSUB8 Amplifier delivers a peak power of 200 watts and a continuous power of 150 watts under 4 ohms, whilst ensuring a high-level electronic protection. Specially tailored for the passive subwoofer 100 IWSUB8, this amplifier is able to power up to two subwoofers connected in parallel.
This powerful combination is the ideal add-on to a 100 Series audio/video setup, delivering an unique ambiance and sound coverage in your living spaces.
This product can only be shipped to U.S. addresses.
- Peak power: 200W (continuous power : 150W under 4 Ohm)
- Amplifier able to drive 2x 100 IWSUB8 subwoofers connected in parallel
- High-level electronic protection (dynamic power control, thermal protection, short circuit, fuse, and over-current protection).
- Flush potentiometers
- Power (continuous)
- Max 200W, 150W continuous (4 Ohm)
- Minimum load
- 4 Ohm
- Voltage range
- 100-120V-60Hz / 220-230V-50Hz
- Power consumption
- 150W
- Stand-by power consumption
- 0.5W
- Bandwidth
- 20-250Hz
- Subsonic filter
- 18dB/oct.
- Inputs
- LFE, Line in L/R
- Outputs
- Line out L/R and subwoofer power output on speaker terminal
- Cord
- Detachable IEC power cord
- Protection
- Dynamic power control, thermal protection, short circuit, fuse, and over-current protection
- Dimensions (H x W x D)
- 1.75 x 16.88 x 10.11" (44.5 x 429 x 257mm)
- Weight
- 6.8 lb (3.1kg)
|
Pure power and precision. The A6A has been carefully designed so every element of your entertainment is the best it can be. From slight whispers of sound to swift on-screen movements, the A6A ensures you won't miss a thing.
Breathtaking Sound
Surround:AI
Dolby Atmos
Dolby Atmos with Height Virtualization
DTS:X
High Slew Rate Amplifier
Compressed Music Enhancer
MusicCast multi-room audio
Wi-Fi, AirPlay 2 and Spotify Connect
Streaming services include Spotify, Amazon Music, Pandora, TIDAL, Deezer, Qobuz, Napster and SiriusXM
Zone 2/3 and HDMI Zone 4
Phono input
Movies And Games Like Never Before
4K60 Ultra HD with HDR, Dolby Vision, Hybrid-Log Gamma and BT.2020
HDR 10+, 8K60AB, 4K120AB via future update
Gaming-dedicated functions (ALLM, VRR, QMS, QFT) via future update
Multiple HDMI inputs with the latest technology
AURO-3D via future update
Simple To Set Up, Simple To Use
MusicCast app
AV Setup Guide app
Voice control with Alexa and Google Assistant devices; works with Siri via AirPlay 2
Integration with third party control partners
Designed For Your Space
YPAO-R.S.C. with multipoint measurement and precision EQ
Wireless rear surround capability
Sleek, modern design
Anti-Resonance Technology Wedge (Fifth Foot)
Breathtaking Sound
Surround:AI
This artificial intelligence analyzes the DSP parameters and optimizes the surround effect of distinct sound elements such as background music, dialogue, and sound effects. It's like having a professional sound engineer tune the sound according to the scene. 64-bit processing with Qualcomm QCS407
Crafted for Clarity
The newly designed Anti-Resonance Technology (A.R.T.), H-shaped Cross Frame and mechanical structure are a rock-solid defense against internal and external vibrations that affect the sound. Experience crystal clear sound that moves you, all while your AV receiver stays perfectly still. A double-bottom plate ensures stability for unnecessary vibrations.
High-Quality Digital Components
The Qualcomm QCS407 takes your AV receiver's audio performance to the next level with support for Dolby Atmos and DTS:X. SABRE ES9026 PROs minimize noise to make even the most delicate sounds rich, while SABRE ES9007S Premier Audio DAC provides superior signal-to-noise ratio and up to 120dB of dynamic range for professional quality audio.
AURO-3D
Bring your entertainment experience to the next level with immersive audio that accurately reproduces 3D sound with superior effect across any content. Gain entry into a world where every breath-taking moment is not only heard but also felt.
Movies And Games Like Never Before
8K60AB, 4K120AB and 4K60
This feature offering enables a higher resolution and refresh rate, giving you a smoother and more realistic viewing experience.
HDR10+ and Dolby Vision
The latest enhancement for HDR provides deeper contrast and more realistic images that stay true to the creators' intent. Support for Dolby Vision, Hybrid-Log Gamma and BT-2020 included.
Enhanced Gaming Features (ALLM, VRR, QMS and QFT)
New enhanced gaming/media features offer seamless motion and transitions to enhance your performance.
Future Support for Multiple HDMI Inputs
These HDMI inputs will equally support the latest HDMI technology to allow several next-gen gaming consoles to be connected at the same time.
Simple To Set Up, Simple To Use
MusicCast App
Explore the power of multi-room audio, access your sources and streaming devices, and control your AV receiver, all through your smartphone.
Voice Control
Working with Alexa and Google Assistant, your AV receiver is always at your command. Through AirPlay 2, you can stream your music via voice control operation Siri from Apple iOS device.
AV Setup Guide App
This app offers expert guidance through installation, cable connections, and various other settings.
Third Party Control
This receiver includes integration with third party control partners, including Crestron, URC, RTI, Control4 and more
Designed For Your Space
YPAO-R.S.C. with Multipoint Measurement and Precision EQ
YPAO (Yamaha Room Acoustic Optimizer) analyzes your room acoustics and measures speaker characteristics to optimize every channel of your home theater. R.S.C. (Reflected Sound Control) also optimizes sound parameters for maximum performance from CINEMA DSP, Dolby Atmos and DTS:X. This feature includes low frequency mode.
Compatible with Wireless Surround Sound
Go wire-free with MusicCast Surround, letting you create a 5.1-channel surround sound system without the need to run wires to the back of the room. Connect wirelessly by connecting one MusicCast 50 or two MusicCast 20 wireless speakers to this AV receiver.
Dynamic and Compelling Design
Classic Yamaha craftsmanship meets cutting-edge design. Every piece has been carefully crafted to ensure this AV receiver looks and sounds perfect in your home.
- 9.2ch / 150 W
- High Slew Rate Amplifier
- HDMI 7 inputs / 3 outputs
- DTS:X
- Streaming Service
- CINEMA DSP HD3
- 11ch Pre Out
- Multi-room Audio
- AirPlay 2
- Dolby Atmos
- Playback in Multiple Zones
- XLR Input Terminal
- Channel
- 9.2 (11.2 processing)
- Rated Output Power
- (20Hz-20kHz, 2-ch driven): 150 W (8 ohms, 0.06% THD)
- High Slew Rate Amplifier
- Yes
- HDMI with eARC
- Yes
- HDR10, Dolby Vision, Hybrid-Log Gamma
- BT.2020, HDR10+: Yes (via future update)
- MusicCast Surround
- Yes
- HDMI Input/Output (total)
- 7/3
- HDMI 4K60, 4K120AB, 8K60AB support
- 3 / 1 (via future update)
- HDMI CEC
- Yes
- USB Input
- Yes
- Network Port
- Yes
- Wi-Fi
- Yes (2.4 / 5 GHz)
- AirPlay 2
- Yes
- Bluetooth
- Yes (SBC / AAC)
- Front Input
- USB
- Digital Audio Input/Output: Optical
- 3/0
- Digital Audio Input/Output: Coaxial
- 2/0
- IR In/Out
- 1/1
- Analog Audio Input/Output
- 6/0
- Zone 2 and 3
- Yes
- Phono Input
- Yes
- XLR Terminal
- Yes
- Component Video Input/Output
- 1/0
- Composite Video Input/Output
- 2/0
- Preout
- 11.2-ch
- Headphone Output
- 1
- Standby Power Consumption (IR only)
- < 0.4 W
- Auto Power Standby
- Yes
- ECO mode
- Yes
- Dimensions (W x H x D)
- 17.12 x 7.5 x 17.37" (43.48 x 19.05 x 44.11cm)
With antenna up: 17.12 x 10.62 x 17.37" (43.48 x 26.97 x 44.11cm)
- Weight
- 44.8 lbs (20.3kg)
|
High Strength Chassis Contributes to High Density Sound and Pure Audio Reproduction
In order to effectively dampen the vibrations that have adverse effects on sound quality, the A-S801 chassis has a double bottom design with a 1 mm iron plate. In addition, the power transformer and heat sinks in the power amp section are supported by an extremely strong and stable ART (Anti-Resonance and Tough) base. A solid center bar further enhances high rigidity and dampens vibrations. These Yamaha design innovations contribute to superior signal to noise ratio with rich, natural sound reproduction.
High Quality Parts for Outstanding Audio Performance
Notice a custom made power transformer, custom made block capacitors, two direct signal path speaker relays, one point grounding system, extruded aluminum heat sinks and other top quality parts to effortlessly handle demanding audio conditions. The quality of each individual part, as well as how they work together, basically determines the sound quality of this component. Yamaha uses only very high quality parts, carefully selected and tested for their sound properties.
Digital Audio Input for TV and/or Blu-ray Disc™ Player
The A-S801 is equipped for digital audio inputs with an optical and digital coaxial input terminal. The optical is for receiving audio from a TV and the coaxial for receiving audio from a Blu-ray Disc player. The audio stays in the digital domain giving you pure, pristine and dynamic sound for all your entertainment sources.
CD Direct Amplification and Pure Direct Mode for Greater Sound Purity
With a straight connection to the CD input, CD Direct Amplification maximizes the CD sources signal-to-noise ratio. Additionally, engaging the Pure Direct mode causes the music signals to travel the shortest possible circuit route, bypassing the buffer amp, the tone, loudness and balance controls to virtually eliminate any signal degradation for the purest sound quality.
Continuous Variable Loudness Control
The A-S801 also features a new analog loudness control on the front panel that uses electronic volume for higher sound quality which lets you adjust the loudness effect as desired. Separate from the overall volume, this controls the balance of the low and high frequencies providing full tonal range at any volume level by compensating for the natural loss in the human ear at soft levels.
Gold Plated Terminals
Gold plated terminals ensure a high quality connection that prevents signal loss. The A-S801 has gold plated speaker and input terminals.
Simple Yet Sophisticated Design
With a beautiful, simple and unique design inherited directly from Yamaha Hi-Fi audio components, this amplifier also boasts an easy to operate layout. The aluminum front panel has a richly textured silver hairline finish. The control knobs are also of the same luxurious construction as used on our top end models.
- Minimum RMS Output Power
- 8 Ohms:100 W + 100 W (0.019% THD)
6 Ohms: 120 W + 120 W (0.038% THD)
- High Dynamic Power/Channel
- 140 / 170 / 220 / 290 W at 8 / 6 / 4 / 2 Ohms
- Maximum power per channel
- 160 W
- EC power 1 kHz, 0.019% THD, 8 Ohms
- 115 W
- Power band width 0.04% THD, 50 W, 8 Ohms
- 10 Hz to 50 kHz
- Maximum effective output power
- 145 W
- Input sensitivity/Input impedance
- 3.0 mV/47 kOhmss
- Maximum input signal
- Phono(MM) (1 kHz, 0.03% THD): 45 mV or more
CD, etc. (1 kHz, 0.5% THD):2.2 V or more
- Output level/Output impedance
- REC OUT: 200 mV/1.0 kOhmss or less
SUBWOOFER OUT: 3.5 V/1.2 kOhmss
- PHONES jack rated output/Impedance
- 470 mV/470 Ohms
- Frequency response
- CD, etc. (20 Hz to 20 kHz): 0 +/- 0.5 dB
CD, etc. PURE DIRECT on (10 Hz to 100 kHz): 0 +/- 1.0 dB
- RIAA equalization deviation
- PHONO (MM): +/- 0.5 dB
- Total harmonic Phono (MM) to REC OUT
- (20 Hz to 20 kHz, 2.5 V): 0.03% or less
CD, etc. to SPEAKERS(20 Hz to 20 kHz, 50 W, 8 Ohms): 0.019% or less
- Signal to noise ratio (IHF-A network)
- PHONO (MM) (5 mV input shorted): 82 dB or more
CD, etc. PURE DIRECT on (200 mV input shorted): 99 dB or more
CD DIRECT AMP on: 104 dB or more
- Residual noise (IHF-A network)
- 40 uV
- Channel separation
- CD, etc. (5.1 kOhmss input shorted, 1 kHz): 65 dB or more
CD, etc. (5.1 kOhmss input shorted, 10 KHz): 50 dB or more
- Bass
- Boost/Cut (20 Hz): +/-10 dB
Turnover frequency: 400 Hz
- Treble
- Boost/Cut (20 kHz): +/-10 dB
Turnover frequency: 3.5 kHz
- Continuous loudness control
- Attenuation (1 kHz): -30 dB
- USB (Type B)
- Supported USB2.0
- Supported digital audio format
- PCM (2-ch): 192/176.4/96/88.2/48/44.1/32 kHz
- Supported digital audio format (USB)
- PCM (2-ch): 384/352.8/192/176.4/96/88.2/48/44.1 kHz
DSD: 2.8224/5.6448 MHz
- PCM word depth
- 32/24/16 bit
- Power supply
- AC 120 V, 60 Hz
- Damping Factor
- 240
- Total Harmonic Distortion (CD to Sp Out)
- 0.019% (50 W / 8 Ohms)
- Signal-to-Noise Ratio (CD)
- 99 dB (input shorted, 200 mV)
- Audio In / Out
- 8 / 2
- Digital Input
- Yes (optical / coaxial)
- USB Input
- Yes (type B)
- Subwoofer Out
- Yes
- DC out
- Yes
- Pure Direct
- Yes
- ToP-ART
- Yes
- Switchable CD Direct Amplification
- Yes
- Standby Power Consumption
- 0.5 W
- Power Management (Auto Power Standby)
- Yes
- Dimensions (W x H x D)
- 17.12 x 6 x 15.25" / 434.84 x 152.4 x 387.35mm
- Weight
- 26.7lbs / 12.11kg
|
Designed for optimum IMAX Enhanced and Dolby Atmos/DTS:X movie playback in a seamless 7.2.2ch/5.2.4ch surround sound calibrated by Advanced MCACC, along with support for next-generation video standards, the VSX-LX304 brings multi-dimensional excitement to your home entertainment. Dolby Atmos Height Virtualizer can provide virtual sound effects without using height or surround speakers. Enjoy multi-room audio streaming with SONOS system, FlareConnect, Chromecast built-in, DTS Play-Fi, and Apple AirPlay 2.
IMAX Enhanced
The VSX-LX304 is IMAX Enhanced, certified to deliver the powerful sound just as intended by the filmmaker, and provide the immersive experience on your home theater.
Dolby Atmos/Dolby Surround Upmixing
The VSX-LX304 is compatible with 7.2.2ch/ 5.2.4ch configuration of the latest theater sound platform, Dolby Atmos. You can reproduce object-oriented sound in smooth, curving movements, or the realistic three-dimensional movement overhead by the top speakers. Other audio codecs such as PCM and DSD can be upmixed using Dolby Surround for enjoying 3D surround sound.
DTS:X/DTS Neural:X Upmixing
DTS:X is the next-generation audio codec from DTS that leverages object-based audio to enable new immersive and interactive audio experiences. Enjoy a seamless soundscape with 7.2.2ch/5.2.4ch surround system offering maximum excitement. Other audio codecs such as PCM and DSD can be upmixed using DTS Neural:X for enjoying 3D surround sound.
Dolby Atmos Height Virtualization
When playing any Dolby format, engaging the Dolby Atmos Height Virtualizer enables a more immersive listening experience, creating a virtual surround and height effect from traditional speaker layouts without employing additional surround or height speakers.
Apple AirPlay
Apple AirPlay 2 lets you effortlessly stream music or podcasts to speakers throughout your house using any Apple device or by asking Siri, and it all stays in perfect sync.
Next Generation Video Standard Ready
The VSX-LX304 supports pass-through for HDR10, HLG (Hybrid Log-Gamma), and Dolby Vision signals. By connecting a compatible source device, you can enjoy these latest video standards on a compatible display. What's more, all HDMI terminals support 4K (60p/4:4:4/24-bit), Wide Color Gamut (BT.2020), and HDCP 2.2, so you will have no problem when upgrading to new devices, and can also enjoy premium content such as 4K videos with digital copy protection.
Advanced MCACC Auto Room Tuning featuring Auto Phase Control Plus
Advanced MCACC adjusts the sound according to the listening room and speakers, and also creates clearer sound by suppressing the standing waves that occur between walls or ceiling and floor. Measurement of up to nine positions can be saved for a wide listening area. Auto Phase Control Plus makes real-time analysis of the phase difference, and automatically compensates the gap between the LFE and main signals, providing strong bass and clear high-frequency sound.
Works with SONOS
connecting the VSX-LX304 to Sonos Connect, you can play any music or audio source on your Sonos app. You can group the VSX-LX304 with other Sonos devices on the network, or use it independently. The AV receiver will automatically turn on and switch input as soon as you play music on your Sonos app.
Powered Zone 2 with Dedicated DAC
With the powered feature, the VSX-LX304 can directly drive speakers in another room, without the need for a separate amplifier. What's more, the dedicated DAC for Zone 2 lets you listen to all digital audio sources.
Zone B Output for Wireless Headphones
The VSX-LX304 is equipped with Zone B audio output terminals for expanding the Main Zone sound. You can listen to the sound playing in the living room via wireless headphones.
Chromecast built-in
The VSX-LX304 comes with Chromecast built-in, so you can use your mobile device to stream your favorite music, radio, or podcasts to your speaker. You can control the audio from anywhere in the house using Chromecastenabled apps running on your personal device-iPhone, iPad, Android phone and tablet, Mac and Windows laptop, and Chromebook. The VSX-LX304 also works with the Google Assistant, so you can tell it to turn up the volume, skip tracks, or stop the music using your Google Assistant enabled device, like Google Home.
Audio Features
• IMAX Enhanced
• Dolby Atmos, Dolby Surround Upmixer supports DTS Formats
• DTS:X, DTS Neural:X Upmixer supports Dolby Formats
• Reflex Optimizer
• Dolby Atmos Height Virtualizer
• Dolby TrueHD, Dolby Digital Plus
• DTS-HD Master Audio, DTS-HD High Resolution Audio, DTS 96/24, DTS-ES, DTS Express
• DSD Disc (SACD) Playback via HDMI (2.8 MHz/2ch, 5.1ch)
• Digital Quad-Core 32-bit DSP (Cirrus Logic)+ Aureus floating-point DSP (TI)
• 384 kHz/32-bit D/A Conversion with AK4458 (AKM) & PCM5101A (TI)
• Audio Return Channel (ARC) on HDMI
• MCACC Auto Room Tuning - Auto Phase Control Plus, Subwoofer EQ, Multi-point Standing Wave Control
• Advanced Sound Retriever (2ch)
• Advanced Surround Modes - Classical, Unplugged, Entertainment Show, Drama, Advanced Game, Action, Rock/Pop, Sports, Extended Stereo, Extended Mono, Front Stage Surround Advance
Video Features
• Ultra HD Pass-through with HDCP 2.2 (4K/60p/4:4:4/24-bit, 4K/24p/4:4:4/36-bit, 4K/60p/4:2:0/36-bit)
• HDR10, HLG and BT.2020 Wide Color Gamut Signal Pass-through
• Dolby Vision Compatible
• Ultra HD Upscaling (1080p to 4K)
• 3D Ready (Blu-ray Disc, Broadcast, and Games)
• Deep Color (36-bit), "x.v. Color"
Home Network Features
• FlareConnect for Multi-room Audio
• Chromecast built-in and Works with the Google Assistant
• DTS Play-Fi with Pioneer Music Control App
• Apple AirPlay 2
• Works with SONOS
• Amazon Music, Pandora, Spotify Freemium, Spotify Premium, TIDAL, and Deezer Music-Streaming Services Ready
• Internet Radio with TuneIn
• Hi-Res Audio File Playback via USB/Network - Up to 192 kHz/24-bit ALAC, AIFF, FLAC, WAV (RIFF) and 11.2 MHz DSD
Convenience Features
• Personal Preset
• Dialog Enhancement
• Dual Band (5 GHz/2.4 GHz) Wi-Fi Built-in
• Bluetooth Wireless Technology (Version: 4.2 + LE, Profile: A2DP 1.2/AVRCP 1.3, Codec: SBC/AAC) Built-in
• Pioneer Remote App Ready for Multi-room Entertainment Control and Network Streaming
• User-Friendly GUI with System Setup Menu
• On-Screen Information for Audio/Video Status
• Auto Power Off in HDMI Standby Through
• AM/FM Tuner 40 Presets
• Sleep Timer
• User-Friendly Simple Remote Control
Front Terminals
• HDMI 1 In
• USB 1 In for USB Drive
• MCACC Setup MIC In (Gold-Plated)
• Audio 1 In (Mini Stereo Jack, Gold-Plated)
• Phones 1 Out (Gold-Plated)
Rear Terminals
• HDMI 6 In (4 Assignable)
• HDMI 2 Out (1 for MAIN, 1 for SUB)
• Ethernet 1 In
• USB 1 In for USB Drive
• Audio 4 In (Assignable)
• Phono (MM) 1 In
• Digital Coaxial 1 In (Assignable)
• Digital Optical 1 In (Assignable)
• Subwoofer 2 Pre Out
• ZONE B Line Out for Wireless Headphones
• ZONE 2 Pre/Line Out
• Speaker 9ch Out (FRONT, CENTER, SURROUND, SURROUND BACK/HEIGHT/Bi-AMP, ZONE 2)
• IR 1 In/1 Out
• 12 V Trigger 1 Out
• RS-232C
• FM/AM Antenna
- IMAX Enhanced
- Dolby Atmos/Dolby Surround Upmixing/Dolby Atmos Height Virtualizer
- DTS:X/DTS Neural:X Upmixing/DTS Virtual:X
- Apple AirPlay 2 / Works with SONOS
- Powered Zone 2 with Dedicated DAC
- 225 W/ch (6 ohms, 1 kHz, THD 10 %, 1ch Driven)
- 100 W/ch (8 ohms, 20 Hz-20 kHz, THD 0.08 %, 2ch Driven, FTC)
- Channels
- 9.2
7.2.2 or 5.2.4 in Dolby Atmos and DTS:X Setups
- Power Output per Channel
- 100 W per Channel @ 8 Ohms, 20 Hz to 20 kHz, 0.08% THD, 2 Channels Driven, FTC
225 W per Channel @ 6 Ohms, 1 kHz, 10% THD, 1 Channel Driven
- Speaker Impedance
- 4 to 16 Ohms
- Amplifier Type
- Direct Energy
- DAC
- 384 kHz / 32-Bit AKM (AK4458) and TI (PCM5101A)
- Dolby
- Dolby Atmos, Dolby TrueHD, Dolby Digital Plus
- DTS
- DTS:X, DTS Neural:X, DTS-HD Master Audio, DTS-HD High Resolution Audio, DTS 96/24, DTS-ES, DTS Express
- Maximum Resolution Supported
- 4K 60 Hz (4:4:4, 24-Bit)
- Tuner
- AM/FM
- FM/AM Preset Memory
- 40 Stations
- Wi-Fi
- Dual-Band 2.4 / 5 GHz
- Bluetooth
- Version: 4.2 + LE
Profiles: A2DP 1.2, AVRCP 1.3
Codecs: SBC, AAC
- Inputs
- 7 x HDMI
1 x Optical TOSLINK
1 x Digital Coaxial
5 x Stereo RCA (1 Phono with Ground Screw)
1 x Gold-Plated 1/8" / 3.5 mm Aux (Front)
- Outputs
- 2 x HDMI
1 x Stereo RCA Zone 2/B
1 x Gold-Plated 1/4" / 6.35 mm Headphone (Front)
- Other Interfaces
- 1 x RJ45 Ethernet LAN
2 x USB (1 Front)
2 x Subwoofer Pre-Out
1 x Gold-Plated 1/8" / 3.5 mm Setup Microphone (Front)
1 x AM Antenna
1 x FM Antenna
1 x DE-9 RS-232C Control
1 x 1/8" / 3.5 mm IR In
1 x 1/8" / 3.5 mm IR Out
2 x 1/8" / 3.5 mm 12 V Trigger Out
- Speaker Connectors
- 9 x Binding Post Pairs
- USB Playback Formats
- Up to 192 kHz / 24-Bit ALAC, AIFF, FLAC, WAV (RIFF), 11.2 MHz DSD (Converted to PCM)
- Power Requirements
- 120 VAC, 60 Hz
- Power Consumption (Active)
- 750 W
- Power Consumption (Standby)
- 0.15 W
- Dimensions (W x H x D)
- 17.1 x 6.8 x 14.9" (435 x 173 x 370.5mm)
- Weight
- 23.8 lb (10.8kg)
| Supercharge Your Favorite Speakers with MusicCast Streaming Audio
Connect a pair of your favorite speakers to this stereo amp, then use your existing Wi-Fi network to access all of your music from a simple app. Add other MusicCast speakers, sound bars or receivers for wireless multiroom audio playback. Great for use with in-ceiling and outdoor patio speakers.
• High-performance design with premium audio components
• Extremely versatile control and connectivity options
• Access to your music library, Pandora, Spotify, Rhapsody and more
• MusicCast app for Apple iOS and Android devices
• Conveniently slim, can be placed horizontally or vertically
Audiophile Sound, Exquisite Design
The WXA-50 features a solid metal body with an aluminum cover and a slim, compact design that fits just about anywhere. Under the hood, you'll find high-performance components and advanced circuitry that deliver powerful, sonically-pure amplification.
Control at Your Fingertips
Connect the WXA-50 to any pair of traditional wired speakers (bookshelf, tower, in-ceiling or outdoor speakers), then download the free MusicCast app to connect it to your existing home Wi-Fi to create a powerful streaming audio system.
Quickly select sources, browse your music library and control playback right from your smartphone or tablet. You can also control sound EQ settings from the app.
All Your Content
Access streaming music and Internet radio stations, music files on your mobile devices and computers, Bluetooth sources and external sources such as a TV, Blu-ray Disc player or even a turntable.
MusicCast
A single WXA-50 can be used with speakers to create a standalone streaming audio system or multiple units can be used throughout the home. Play different music in each room or get everyone listening to the same thing. It can also be used with other MusicCast speakers, sound bars, AV receivers or Hi-Fi gear, providing more options and versatility than ever before.
Bluetooth and AirPlay
Stream virtually any audio source via Bluetooth as an input to the WXA-50. Bluetooth sources can be redistributed through Wi-Fi to other MusicCast devices. Or stream using AirPlay from an Apple device to a single unit.
Slim, Compact Design
Only 2" tall and 8-3/8" wide, it can be placed horizontally or vertically, allowing it to fit neatly in almost any space.
Rack Shelf Friendly
With the feet removed, the WXA-50 is only 1-5/8" high, allowing it to be placed on a rack shelf within a 1U high rack space. Two units can be placed side-by-side on a 19" wide shelf.
Superior Audio Technology
Yamaha's relentless pursuit of sonic purity is clearly evident in the engineering of the WXA-50. The preamp circuitry uses the same high-performance ESS Digital-to-Analog Converter (DAC) found in high-end Yamaha AV receivers and a proprietary power supply ground configuration prevents sound degradation. A 48-bit digital volume control provides much greater precision and quality than conventional controls. A highly-rigid metal chassis supplies the stability necessary for clear, powerful music reproduction.
High-Resolution Audio
The WXA-50 supports high-resolution audio - including FLAC/WAV/AIFF up to 192 kHz/24-bit, Apple Lossless (ALAC) up to 96 kHz/24-bit and DSD up to 5.6 MHz - for more accurate reproduction of sonic details, presence and atmosphere.
Yamaha Proprietary Sound Processing
The Compressed Music Enhancer greatly improves sound reproduction from smartphones or other compressed sources, like MP3 files. Volume-adaptive EQ automatically adjusts the bass/treble balance according to the volume level. Advanced Bass Extension provides a deeper, richer low-end sound - great for use with compact or in-wall speakers. Direct Mode allows you to play back high-resolution audio sources just as they are, without any processing.
One-Touch Controls
Pressing any button on the front panel turns the unit on and initiates playback of the previously selected source providing quick and easy access to your favorite music.
The WXA-50 also comes with an ultra-slim remote offering six presets, so you can quickly access your favorite Internet radio stations even when your smartphone or tablet's not handy.
Pro-Grade Connectivity and Control
The WXA-50 supports professional-grade features including:
• High-quality binding posts
• Wired Ethernet port
• Wireless off switch
• Optical and analog inputs
• Subwoofer out
• Trigger in/out
• Remote in
Low Power Consumption
The WXA-50 consumes less than two watts of power in standby mode. When the power is on, power consumption is still a low 15 watts. In addition, the Auto Power Standby feature lets you save energy by automatically turning the power off after two, four, eight or 12 hours.
This product can only be shipped to U.S. addresses.
- DLNA
- Version 1.5
- File Format
- MP3, WMA, MPEG-4 AAC, WAV, FLAC, AIFF, ALAC, DSD
- Wi-Fi
- Yes
- AirPlay
- Yes
- Bluetooth
- Yes (SBC / AAC)
- Rated Output Power
- 70 W + 70 W (6 ohms, 20 Hz-20 kHz, 0.06% THD, 2-ch driven)
55 W + 55 W (8 ohms, 20 Hz-20 kHz, 0.06% THD, 2-ch driven)
- Maximum Output Power
- 90 W + 90 W (6 ohms, 1 kHz, 0.9% THD, 1-ch driven)
- Pure Direct
- Yes
- Total Harmonic Distortion (20 Hz-20 kHz)
- 0.02% (SP out)
- Signal-to-Noise Ratio
- 110 dB (Opt / Net / USB / Bluetooth in) / 98 dB (aux in)
- Audio In / Out
- 1/1
- Digital In / Out
- 1 (optical) / 0
- USB Input
- 1
- Ethernet
- 1
- Subwoofer Out
- 1
- Remote In / Out
- 1/0
- Control (Trigger) In / Out
- 1/1
- Standby Power Consumption
- 1.8 W
- Dimensions (W x H x D)
- Overall: 8.37 x 2 x 9.62" / 212.60 x 50.80 x 244.35mm
With Antenna: 8.37 x 4.87 x 9.62" / 212.60 x 123.70 x 244.35mm
Without Antenna and Feet: 8.37 x 1.62 x 9.62" / 212.60 x 41.15 x 244.35mm
- Weight
- 4.28lbs / 1.94kg
|
Reviews
There are no reviews yet.