| Content | The XPRS Series active PA speakers are compact and portable, yet high powered. Forget complicated setups and tangled cables as this system offers straightforward, plug-and-play use. Pioneer Pro Audio sound engineering technology and the use of Powersoft amps ensures these mobile speakers are reliable and energy efficient, making them suitable for all music genres and environments.
The XPRS12 compact 12-inch speaker fills the room with a dynamic, natural sound thanks to its plywood enclosure and high-performance driver. Sound is produced at low distortion, even at high volumes. The XPRS12 uses Powersoft Class D amp modules with Power Factor Correction (PFC). PFC reduces power consumption while ensuring steady performance in all environments. Pioneer Pro Audio’s AFAST technology drastically reduces standing waves that can produce a muffled response in the low to mid ranges. An acoustic tube in the cabinet absorbs only the standing waves, increasing the low-to-mid frequency response. Adapt to a variety of genres and environments using the rotary selector switch on the back of the speaker to give you instant access to 4 EQ modes: Flat, Bass +, Speech and Wedge. 2 balanced XLR/TRS combo sockets and an unbalanced RCA connection mean you can connect at the same time a Mic and other devices, such as line-level mixers or portable audio players. 2 balanced XLR through outputs let you connect easily to other speakers and subs.
Pioneer DJ XPRS-12 Features
- 12" ferrite LF driver, 1.75" titanium diaphragm compression driver
- Natural full-range sound with low distortion even at high volumes
- Powersoft Class D amp
- Power Factor Correction
- AFAST technology
- 4 EQ modes
- Advanced protection
- Flexible connectivity
- Rotatable horn
- Auto-ranging power supply
- Black semi-matte textured impact resistant finish
- Birch hardwood cabinet
|
The compact, 14" Tall Aon 3 Bookshelf Monitor incorporates a 7", High-Definition, Multi-Vaned Phase Plug (MVPP™), cast-basket Mid-Bass Driver, coupled to two 8" Inertially-balanced side-mounted Low-Frequency Radiators and the GoldenEar High-Velocity Folded Ribbon Tweeter (HVFR™).
The BRX, Aon 2 and 3 bookshelf speakers are exceptionally compact, ultra-high-performance speakers that were originally developed for use as nearfield monitors in professional mixing applications. The design goal was to produce modestly-sized shelf or stand-mountable bookshelf speakers that would achieve accurate high-definition sonic reproduction, with superb three-dimensional imaging, comparable to that achieved by GoldenEar’s award-winning Triton Towers. The new BRX was specifically developed incorporating technology developed for the Triton Reference in order to achieve reference level performance. Although they don’t have quite the awe-inspiring bass of the floor-standing Tritons, great care has been taken, and extensive technology has been incorporated, to ensure that the BRX and Aons can deliver a remarkably satisfying full range listening experience without the need for a separate subwoofer.
Both the BRX and Aon models incorporate GoldenEar-designed cast-basket bass/midrange drivers with technology derived from the midrange units developed for the Tritons. The BRX driver is actually almost exactly the same as the 6" driver used in the Triton Reference. In addition, they all use extraordinary and costly High Velocity Folded Ribbon (HVFR™) high frequency radiators. And the BRX uses the same tweeter developed for the Triton Reference. Lastly, each BRX and Aon model utilizes two side-mounted planar low-frequency radiators in an inertially balanced configuration in order to properly load the bass/midrange drivers for an open, box-less midrange, while also contributing to their’ remarkably extended bass for such small enclosures.
|
Extraordinary sound from incredibly small cabinets. These stylish and discrete wide dispersion speakers offer superb integration in any home and are designed to match perfectly with your choice of Minx subwoofer
Balanced Mode Radiator (BMR) technology affords Minx to be ultra–small and discreet, yet still offer the audio performance of a traditional box speaker. Unlike other style systems, which display obvious separation between the source of bass and higher frequencies, Minx sounds truly integrated for the purest possible sound. The Minx Min 12 measures just 3.1" square, but thanks to its 2.25" BMR driver, it delivers power and refinement that defies its size. The compact speaker offers a variety of prime placement options with a standard 3/8" speaker mount. The BMR driver technology used in Minx gives the system an incredibly wide dispersion of sound. This allows Minx to be placed almost anywhere in the room and still sound fantastic wherever you may be sitting. Minx features traditional 5–way binding posts, meaning that you can use standard speaker cables of your choosing rather than having to put up with yards of cheap, unwanted umbilical cable. Perfect for preconstruction builds, where you can make all of your speaker runs with the perfect length of cable. Unlike many style speaker packages which use low quality spring clips or custom cabling, Minx offers universal connection to any home cinema receiver or amplifier with an ingenious speaker terminal design, which can be removed to support 4mm banana plugs.
| With the ElectroMotion ESL, Martin Logan has created the world's most affordable high-performance hybrid electrostatic loudspeaker, with a legendary CLS™ XStat™ transducer and an 8-inch woofer to deliver ideal home theater front/surround sound.
ElectroMotion ESL
The ElectroMotion ESL represents a bold new direction for electrostatic loudspeaker design. Featuring a full-sized 34-inch tall curvilinear XStat™ electrostatic transducer and a superbly integrated high-performance woofer, the new EM-ESL performs more like a mini-flagship than an entry level audiophile speaker. Designed for both 2-channel music enthusiasts and those seeking the worlds most articulate and dynamic multi-channel home theater systems, the EM-ESL is the most compelling 'affordable' audiophile-grade speaker ever brought to market.
The ElectroMotion ESL (EM-ESL) represents a brave new direction for electrostatic loudspeaker design. Featuring a full-sized 34-inch tall curvilinear XStat™ electrostatic transducer the new ESL performs more like a mini-flagship than an entry level audiophile speaker. Long time MartinLogan enthusiasts are sure to describe ElectroMotion ESL as the second-coming of the legendary Aerius electrostatic speaker which debuted in 1992 and went on to sell in record numbers. The new ESL, however, boasts 40 percent more radiating surface, a superbly integrated and authoritative bass performance, and a sensitivity rated at 91dB. In addition, the ESL is capable of being effortlessly powered by both receivers and high-end amplifiers alike.
ElectroMotion ESL's XStat electrostatic MicroPerf panel is housed within a radical aluminum and composite AirFrame™ similar to those found on MartinLogan's flagship products. AirFrame technology rigidifies the electrostatic panel without obstructing playable surface area or interfering with ambience enriching dipole sound radiation. At the same time, an AirFrame provides electrical and acoustical isolation, minimizing intermodulated distortion caused by vibration and resonance while enhancing imaging, low-level sonic detail, accuracy, and efficiency. MicroPerf design optimizes the individual holes of The EM-ESL's electrostatic panel. MicroPerf design substantially increases diaphragm radiating area, compared to early generations—without compromising structural integrity. The resulting increase in output capability and efficiency allows The EM-ESL's panel to enjoy a substantial leap in bandwidth and dynamics without growing larger. For example, The EM-ESL's XStat electrostatic panel features 129 square inches of sound radiating surface on both the front and back and a sensitivity of 91dB into 6 Ohms. The Aerius, well received its day, only had 93 square inches and a sensitivity of 89dB into 4 Ohms.
A unique XStat™ transducer was developed for the ElectroMotion ESL to reduce the gauge thickness of the electrostatic panel's steel stators. The reduced gauge does not alter the performance characteristics of the panel. However, as a natural byproduct of tighter build tolerances, it does increase the visual transparency of the panel. The EM-ESL's new XStat panel is so visually transparent it nearly vanishes when you're sitting and listening.
Controlled Dispersion Sound Radiation
Another key attribute of the ElectroMotion ESL is its naturally dipolar radiation pattern. A true dipole, The EM-ESL radiates sound with equal intensity from the front and back of its diaphragm, but the outputs are in opposite phase. As a result, sound waves rippling out toward the sides meet at the speaker's edge and cancel. That and the relatively large size of the ElectroMotion ESL's electrostatic panel cause output at the sides to be very low relative to that of a conventional loudspeaker, which in turn minimizes side-wall reflections that tend to muddle sonic detail and stereo imaging. While the reduction in output to the sides contributes to the astonishing clarity for which electrostats are revered, the energy reflected off the wall behind the speaker opens up and deepens the sound.
Superb Bass Integration
To seamlessly blend audio output from the high- and mid-frequency electrostatic panel to the low-frequency woofer the ElectroMotion ESL features a proprietary Vojtko™ topology filter utilizing custom air core coil and low DCR steel laminate inductors, polyester film capacitors in series, and low DF electrolytic capacitors in parallel.
A precise 8-inch high-excursion, perfectly balanced, audiophile grade, doped fiber cone woofer was custom designed exclusively for The EM-ESL by MartinLogan's in-house engineering team. This woofer precisely optimizes cone suspension and magnetic flux field to produce high levels of bass output and simultaneous precise midrange. The custom woofer's rigid light-weight diaphragm eliminates cone flexure and minimizes response time to achieve remarkably low-distortion approaching that of MartinLogan's award-winning electrostatic panel design.
Easy Connections, Solid Adjustable Footing
Convenient push-style speaker terminals and curved inserts help guide speaker wire effortlessly into place. The rubber end caps on the terminal are also removable for the use of banana plugs instead of bare wire. The EM-ESL is supplied with sturdy, 3/8-16 ETC™ spikes, which can be used to fine tune vertical wave launch, enhance stability on thick carpets, and create tighter coupling between speaker and floor to provide a tighter and detailed bass performance. Each spike is conveniently covered by removable rubber end caps if you prefer not to use spikes. |
MartinLogan's Burial Conduit Junction can be used with the Outdoor Living Series Sat 40 and Sat 60 speakers to enhance the ambiance of your outdoor living space. With a sleek, attractive dark bronze finish, the conduit junction looks and feels high-quality.
- Mount your speakers on the ground, in a tree, on a deck rail, or under an eave with the 12" Ground Stake.
- The half-inch threaded "Quick Twist Cap" gives you the flexibility to mount or "plant" the satellites anywhere to get the sound coverage you want.
- "Quick Twist Cap" works universally with all three speaker mounts: 12" Ground Stake, wire-protecting Burial conduit Junction, or Surface Mount Bracket for walls and decks.
|
The SuperSat 60C is a larger, more powerful versions of our award-winning SuperSat 50C. It's very thin depth makes it perfect for wall mounting next to the latest super thin TVs. This is easily accomplished using the threaded inserts or keyhole mounts on the rear. Dual adjustable feet allow multiple angles when shelf-mounting the horizontal center-channel 60C.
Every GoldenEar SuperSat satellite speaker model takes advantage of the extraordinary GoldenEar High‐Velocity Folded Ribbon (HVFR™) design tweeter. The HVFR tweeter propagates sound waves and moves the air by squeezing it with its accordion‐like pleated diaphragm, rather than pushing it as conventional drivers do. The result is better impedance matching to the air in the room with greater control, smoother more extended response with lower distortion and dramatically improved dynamic range. Each SuperSat speaker model also utilizes GoldenEar’s ground‐breaking 4.5" cast-basket upper bass/midrange drivers, which incorporate our proprietary Multi-Vaned Phase Plug design (MVPP™) as well as our proprietary computer optimized cone topology, arranged in a D’Appolito array surrounding the HVFR tweeter.
- Four 4-1/2" high-definition cast-basket MVPP™ bass/midrange drivers
- Two 4" x 7" quadratic planar low-frequency radiators
- One high-velocity folded ribbon (HVFR™) tweeter
|
Reviews
There are no reviews yet.