| Content | Turntable section
Type Direct: Drive Manual Turntable
Turntable Speeds: 33-1/3, 45 and 78 r/min
Starting Torque :2.2 kg-cm
Build-up Characteristics: 0.7 s. from Standstill to 33-1/3 r/min
Wow And Flutter: 0.025 % W.R.M.S.
Turntable Platter:
- Aluminum diecast
- Diameter : 332 mm (13-5/64 inch)
- Weight: Approx. 2.5 kg (5.51 lb) (Including rubber sheet)
Tonearm Section
Type: Universal Static Balance
Effective Length: 230 mm (9-1/16")
Overhang: 15 mm (19/32")
Tracking Error Angle:
- Within 2° 32' (at the outer groove of 30 cm (12") record)
- Within 0° 32' (at the inner groove of 30 cm (12") record)
Offset Angle: 22°
Arm-height Adjustment Range: 0 - 6 mm
Stylus Pressure Adjustment Range: 0 - 4 g (Direct Reading)
Head Shell Weight: Approx. 7.6 g | The word "Ultra" is synonymous with Mobile Fidelity Sound Lab's philosophy. It represents their extreme pursuit of the highest level of reproduction of recorded sound-beyond the status quo-to provide music lovers with the experience of hearing the Original Master Recording in their home. Whether you're enjoying a standard LP or one of our UltraDisc One-Step limited-edition records, UltraDeck will deliver faithful playback of what's in the grooves.
Ultra Tonearm
Custom-developed and manufactured in the USA, the 10-inch Ultra tonearm uses smooth, high-quality ball bearings for low friction in the vertical and horizontal plane so all you hear is what is in the grooves. Cardas Audio wiring maintains signal purity from the headshell leads all the way through to the high-quality, gold-plated RCA connectors.
Isolated AC Synchronous Motor
Their stepped-pulley AC motor provides excellent speed stability for pitch accuracy and rhythmic drive. The Delrin pulley has two positions for 33 1/3 and 45 RPM speed selection. Motor vibrations are kept away from the platter and stylus by using advanced dampening materials that decouple the motor from the rest of the turntable.
Constrained Layer Dampening
UltraDeck features three aluminum plates carefully bonded to an MDF body to add mass and eliminate tonal coloration, maintaining the true sound found on the record.
Anti-Vibration Feet by HRS
Any vibration of the stylus that is not created by the grooves in the record is a distortion that will mask musical detail. Developed in conjunction with the engineering team at Harmonic Resolution Systems, the world leader in vibration isolation for audio equipment, the included MoFi anti-vibration feet isolate your turntable from bad vibrations.
1.3-Inch Derlin Platter
UltraDeck features a massive 1.3-inch Delrin platter. The increased mass creates blacker sonic backgrounds and a lower noise floor. Delrin is a next-generation polymer developed by Dupont. In the world of audio, Delrin's highly crystalline structure presents a wonderful impedance match to vinyl records, effectively grounding unwanted noise and keeping it away from the stylus.
Hardened Steel Inverted Bearing
Our hardened-steel inverted bearing system is designed for smooth, quiet rotational stability. The extremely low tolerance combination of steel, bronze, and sapphire-found in much more expensive turntables-will provide you many years of high-performance playback.
|
- Ultra lightweight plinth: The Planar 8 is the second Rega turntable constructed using the latest ultra lightweight Tancast 8 polyurethane foam core (a material developed for the aerospace industry). This material is sandwiched between two layers of HPL (high-pressure laminate). HPL is exceptionally thin and extremely rigid. This new construction makes the new Planar 8 skeletal plinth 30% lighter than the original RP8 while offering increased rigidity over the previous model.
- Double Brace Technology: A super lightweight plinth combined with a phenolic resin double brace mounted specifically where the increased rigidity is required (between the tonearm mounting and the main hub bearing) forms a structurally sound a oestressed beam" assembly. This rigid plinth design prevents energy absorption and unwanted resonances which will add unnatural distortions to the music. Equally, heavier mass can transfer more unwanted energy such as motor or bearing noise directly into the rotating record. The use of braces instead of the complete skin allows double thickness phenolic resin in these key areas while providing further weight reduction to the plinth, which directly addresses the issue of mass absorption and unwanted energy transmission.
- RB880 Tonearm: For the new RB880, Rega has introduced an improved vertical bearing assembly constructed using an aluminum and stainless-steel, low mass assembly with vastly improved stability and rigidity. This tonearm is using their advanced preloaded zero tolerance bearing assembly adjusted to less than 1000th of a mm, this gives friction-free movement and zero levels of unwanted play. This subtle but effective new structure is only visible via small windows at the rear of the new bias housing assembly. A thinner stainless steel balance weight is used, allowing greater adjustability and compatibility. Finally, the RB880 is terminated with a re-designed, low capacitance phono cable terminated with high quality, locking phono plugs to ensure the best possible connection.
- Hub bearing assembly: The Planar 8 uses a new low mass central bearing assembly. A single piece machined aluminum sub-platter and hardened tool steel spindle run inside a custom brass housing which is cleverly mounted within the chassis. This new mounting is designed to eradicate unwanted potential energy being transferred or stored in the plinth.
- Super flywheel effect triple layer glass platter: The Planar 8 uses a three-piece laminated glass platter which is the result of collaboration with a British glass engineering company. This brand new platter is constructed from two different high quality Pilkington glasses. As a general rule, the only part of a turntable that requires extra mass is the turntable platter in order to achieve constant rotational speed. However, a heavier platter creates more problems for the main bearing design so again an ideal compromise creates the best solution. Practically this means keeping as much of the mass to the outside rim of the glass platter to create more flywheel effect but keeping the inside of the platter as light as possible without sacrificing stiffness.
- 24v Low noise motor assembly: The Planar 8 uses Rega's latest generation, 24v, synchronous, low vibration motor technology. Uniquely mounted using the highest level of coupling while retaining higher vibration isolation than any previous model. This new motor mounting technique (mounted from the bottom) has been taken directly from the ultimate Rega turntable, the Naiad. This unique mounting method removes all stress on the motor body. The reduced vibration and more rigid mounting delivers superior drive from the new EBLT drive belts. Each motor is hand tuned to match its own custom Neo power supply before fitting to the turntable to optimize the anti-vibration circuit.
- EBLT Drive Belts: For three years Rega has been researching and developing with chemists the use of a bespoke new rubber compound for drive belts. Using a specialized curing system, the new drive belt offers superior consistency of modulus (a constant representing the degree to which a substance has a particular property, especially elasticity). These new belts are manufactured on Rega designed, state of the art, super-accurate tools which produce 'perfectly round' and 'dimensionally accurate' belts, critical for perfect speed stability.
|
The MMF-5.3 turntable is a 2-speed belt driven audiophile turntable employing the unique dual-plinth construction originated by Music Hall.
- Counterweight's center of gravity is level with the stylus tip, is decoupled from the arm, and acts as a resonance damper.
- DC synchronous motor for superior speed stability separately isolated on the lower platform.
- Includes properly aligned and pre-mounted Ortofon 2M Blue cartridge with a replaceable nude elliptical diamond stylus.
- Dynamically balanced alloy platter with soft felt mat.
- Dust cover and 45 rpm adaptor included.
| The C-Major is EAT's best value turntable, incorporating many of the design features of the more expensive C-Sharp. You'll get a heavy platter for great speed stability, a solid record clamp, and the C-Note 9" tonearm, which uses very precision bearings. Combine this with the included $500 Ortofon Quintet Blue cartridge and fitted dustcover, and you will be getting a real value. This package will bring all your vinyl to life and give you many years of listening pleasure.
Design & Build Quality
The first time that we had a chance to play with the EAT turntables there were a couple of things that really impressed us right off the bat. Their striking appearance will obviously catch your attention. We’ve even had several happy EAT customers tell us that when they first got their table out of the box they just stared at it in awe. Once you start to put the table together, however, you will immediately get a great sense of the superb craftsmanship.
The EAT C-Major has a very similar look to the C-Sharp -- the same low slung body and mix of high gloss black, carbon fiber, and brushed aluminum which make many of the other tables on the market look chunky in comparison. The plinth is made of carbon fiber and is nestled on some floating isolators inside a thin, high-gloss black base. The C-Major’s 9” tonearm features a carbon fiber arm tube and the heavy platter supports a special mat that is made from recycled LPs. It’s then topped off with a substantial record clamp. The whole combination just looks fantastic!
Like all great turntables, the C-Major is a fully manual turntable. You might think that a high-end table like this would be difficult to use, but we were pleasantly surprised to discover that it’s just the opposite! You simply turn it on, move the tonearm over the record, lower it down, and enjoy the tunes!
Features & Technology
We’ll start from the bottom of the table and work our way up. The sleek and slim base is made out of a super dense MDF material. Inside, the low-noise motor is mounted to the lower sub-chassis which is isolated from the upper plinth with eight cone-shaped pieces of a high tech damping material called Thermoplastic Elastomer, or TPE. These provide great isolation from the motor and really do a great job damping out external vibrations. If you want to feel the damping effect, simply push down gently on the plinth.
The plinth is made from an outer shell of carbon fiber sandwiched over MDF. The C-Major has three adjustable feet which make leveling everything a snap. The feet are also internally damped to reduce any external noise from getting up to the table. The EAT also includes a low profile dust cover with the C-Major, which not only protects it, but also matches up with its sleek appearance.
The bearing for the inner platter is pretty similar to what you find in most turntables in this category. The inner platter has a shaft that drops into a bronze bearing well where its tip spins on a special plate made of a near friction-free, teflon-like material.
The outer platter weighs in at a stout 4 lbs and has a great design. The top part that touches the record is made out of recycled vinyl, while the rest of the platter is a sandwich design of an aluminum/magnesium alloy with TPE in the center. EAT puts more mass on the outer edge of the platter, which helps to give it a great flywheel effect. This combination of bearing and platter is one reason the EAT tables all have great speed consistency. Like the more expensive C-Sharp, the C-major also comes with an aluminum record clamp.
While there are lots of things we love about this table, one of our favorite aspects is the carbon fiber tonearm that we mentioned earlier. It’s incredibly adjustable, allowing you to use a wide range of phono cartridges on it. These adjustments exude European precision.
The design of the tonearm is a combination of a uni-pivot and a more conventional Carden type.
Uni-pivot arms can move freely, not only across the record and up and down, but also rotating on the horizontal plane. Imagine an airplane coming in for a landing when you see the wings move up and down on each side in relation to the ground. The theory is there is some movement like this in the record grooves and being able to have freedom of movement allows the cartridge to track better.
The downside of uni-pivots is they are a royal pain to adjust. EAT came up with a brilliant solution that gives you the best of both worlds and we can attest to the fact that it works great! You get a small amount of movement where the arm can tip left to right, but it behaves more like a traditional pivoted arm.
The rear counterweight has an additional weighted insert that you can install for cartridges that are heavier than normal. The counterweight doesn’t have any markings like a lot of high end tonearms, so you will need a stylus pressure gauge to set the right force, but luckily EAT includes one in the box.
You also have azimuth adjustment which allows you to adjust the tonearm left and right. When you look at your tonearm from the front while sitting on a record, the headshell should be parallel to the record surface. EAT lets you really fine tune this if you desire. Finally, you can even adjust the height of the tonearm rest and the cueing cylinder, allowing you to really dial things in for your cartridge.
For anti-skating, EAT uses a gravity-based system which we really like. It is a little bit of a pain to set up, but we’ve been able to help everyone through it, so if you purchase one and have any trouble, just give us a call.
Finally, to change from 33 to 45, like a lot of tables out there, you simply lift off the outer platter and move the belt on the motor pulley.
Please don’t let all of these adjustments make you think this table is finicky or hard to set up. The best way to buy it is with the deal EAT has on the Ortofon Blue, Black MC, or their own JO5. These all come preset up and you save quite a bit with the package -- $250 or $500, which makes the table an amazing deal!
Performance
To test out the EAT C-Major, we set up what we thought might be a typical rig. We used the Cambridge CXA80 integrated amp, a Sutherland KC Vibe phono stage and a pair of Paradigm’s new Premier 800F towers. The table used the Ortofon Blue, which we think is probably the best way to go for the money with the C-Major.
First up was the classic Landside from Fleetwood Mac. When you have a great system that is well set up Stevie Nick’s voice should be dead center while the guitars float in between the speakers. This combo aced this test!
Next up was Robbie Robertson’s Somewhere Down the Crazy River from his first solo album in 1987. We look for two things on this one. First, there are some very dynamic bass attacks as the track begins. Then later on, you can hear lots of emotion in his voice when he says "Why do you always end up down at Nick's Cafe?" , "I don't know, the wind just kind of pushed me this way." It’s in the first “why” and “pushed me this way” on a great system you’ll hear all kinds of subtle inflections in his voice. While we have heard more on much more expensive rigs, this combination once again, really drew us into the music. Plus, it nailed the bass attacks.
After hearing this, we wanted to pull out our favorite cut for testing speed stability. This is Pink Houses from John Cougar's Uh-Huh album. If the table has great speed stability, you’ll be tapping your foot to the music. Once again, the EAT was very impressive.
This is one very special table. It has the ability with its precision tonearm to track really well and its isolation system helps it provide that great bass impact. EAT designs are also winning us over for their speed purity. Finally, with its jewel of a tonearm, it's just fun to use!
- The C-Note tonearm on the C-Major is 9" in length instead of 10" on the C-Sharp
- There is no separate speed control
- The main chassis has a more compact footprint
- The platter clamp is smaller
- The platter is smaller
|
Juke Box E is turntable, phono stage, Bluetooth receiver, line pre-amplifier, and power amplifier in one. Just add speakers to create a complete system with the fastest possible installation process.
Juke Box E is record player, phono stage, Bluetooth receiver, line pre-amplifier and power amplifier in one, requiring only a pair of speakers to make a complete system. If you thought that a starter turntable system is complicated to set up, Juke Box E proves the contrary. This good sounding belt-drive deck offers the fastest possible installation process because it comes pre-adjusted out of the box and offers superb sound quality.
Tracking force and anti-skating of the turntable section are carefully pre-set. An acrylic dust cover is included. The “All-in-one turntable system” is available in high-gloss black, red or white color.
The Juke Box Highpower Supply is optionally available. It features up to 50% more peak power output, increasing dynamic and bass response. The true ground connection over a 3 pin power plug can dramatically reduce hum and noise under critical power conditions.
- Instant playback with super-easy setup
- High contrast display on top
- Bluetooth and 1 line input
- Line record output
- Gold plated sockets
- Pre-adjusted tracking force & anti-skating force
- Ortofon OM5e cartridge, pre-mounted
- 8.6” aluminum tonearm with sapphire bearings
- Belt drive with silicone belt
- Low vibration synchronous motor & DC power supply
- Special feet for effective decoupling
- IR remote control included
- Colour options: HG Black, HG White, HG Red
|
Reviews
There are no reviews yet.