Yamaha A-S701 Integrated Amplifier, 290W Dynamic Power at 2 Ohms, 10Hz-100kHz Frequency Response, Black

$565.56

GTIN: 027108948799 SKU: 027108948799 Category:

Description

The Yamaha A-S701 Integrated Black Amplifier is designed for pure sound quality and outstanding drive power. An integrated amplifier with the advantage of analog and digital inputs.

High Quality Circuit Design Based on the ToP-ART (Total Purity Audio Reproduction Technology) Concept
The amplifier design technology from Yamaha is called ToP-ART, which features an input to output with a direct symmetrical design. ToP-ART design and ART Base ensure optimum sound when processing and transmitting the audio signal. The signal is simple and direct, so therefore it is less likely to be affected by noise and distortion. The left and right channels are organized in a straight, symmetrical layout for the highest signal purity. In addition, the ART (Anti-Resonance and Tough) Base bottom chassis and a solid center bar provide high rigidity support and dampers vibration. These design innovations contribute to this amplifier’s rich audio reproduction with abundant musicality.

High Quality Parts for Outstanding Audio Performance
Notice the custom-made power transformer, custom-made block capacitors, two direct signal path speaker relays, one point grounding system, extruded aluminum heat sinks and other top-quality parts to effortlessly handle demanding audio conditions. The quality of each individual part, as well as how they work together, basically determines the sound quality of this component. Yamaha uses only very high quality parts, carefully selected and tested for their sound properties.

Created by Rich Experience, Tradition and High Technological Expertise
Yamaha, with a long history of over 125 years as a musical instrument maker, also has a high reputation for Hi-Fi components. The A-S301 is created by taking advantage of this rich experience and high technological expertise. Based on the concept of “Natural Sound” for reproducing all music as it really sounds, this amplifier is built with scrupulous care from its circuit design to basic sound production

CD Direct Amplification and Pure Direct Mode for Greater Sound Purity
With a straight connection to the CD input, CD Direct Amplification maximizes the CD source’s signal to noise ratio. Additionally, engaging the Pure Direct mode causes the music signals to travel the shortest possible circuit route, bypassing the buffer amp, the tone, loudness and balance controls to virtually eliminate any signal degradation for the purest sound quality..

Continuously Variable Loudness Control
The A-S301 also features a new analog loudness control on the front panel that uses electronic volume for higher sound quality, which lets you adjust the loudness effect as desired. Separate from the overall volume, this controls the balance of the low and high frequencies, providing full tonal range at any volume level by compensating for the natural loss in the human ear at soft levels.

Gold Plated Terminals
Gold plated terminals ensure a high quality connection that prevents signal loss. The A-S501 has gold plated speaker and input terminals.

Digital Audio Input for TV and/or Blu-ray Disc Player
The A-S301 is equipped for digital audio inputs with an optical and digital coaxial input terminal. The optical is for receiving audio from a TV and the coaxial for receiving audio from a Blu-ray Disc player. The audio stays in the digital domain, giving you pure, pristine and dynamic sound for all of your entertainment sources.

Connection for YBA-11 Bluetooth Wireless Adapter (Optional Accessory)
With the YBA-11, you’ll be able to stream music wirelessly from a Bluetooth compatible mobile phone or a PC. Thanks to the digital coaxial connection and the aptx audio coding algorithm, you will enjoy wireless music streaming with optimum sound quality. You can also conveniently power the YBA-11 via the DC out connection on the rear panel of this amplifier.

Speaker A, B or A+B Selection and Speaker Terminals for Two Systems
You can connect two separate speaker systems and hear them in different rooms at the same time. There are four terminals, so by just rotating a simple selector dial, you can switch between the two pairs of speakers to play the selected source.

Subwoofer Terminal
A terminal for connecting a subwoofer is provided, allowing you to increase the bass output of your system for a more powerful sound with better overall sound quality.

Phono Moving Magnet Input Terminal
You can connect a turntable with a MM phono cartridge to play vinyl records. Get the best of both worlds whether listening to analog vinyl or the latest digital technology.

Simple Yet Sophisticated Design
With a beautiful, simple and unique design inherited directly from Yamaha Hi-Fi audio components, this amplifier also boasts an easy to operate layout. The aluminum front panel has a richly textured silver hairline finish. The control knobs are also of the same luxurious construction as used on top end models.

Remote Control with Clean, Simple Design
The clean, simple design of the remote control provides easy to understand operation with a single hand. The design makes it simple to adjust inputs, volume and more. The unit has a sophisticated looking hairline finish that matches the design of the amplifiers. You can also use the remote to control a Yamaha CD player.

Rotary Encoder Input Selector with LEDs
The rotary encoder makes it quick and easy to select input sources. The luxurious hairline finish offers a nice tactile feeling. LEDs clearly show which source is selected, so you can easily switch sources, even in a dark room.

Auto Power Standby Function
When Auto Power Standby is engaged, the amplifier will automatically shift itself into standby mode when a user function has not been executed in eight hours. This is a great function if you forget to turn the amplifier off and it will help minimize power consumption when the unit is not in use.

This product can only be shipped to U.S. addresses.

Yamaha A-S701 Specifications

Minimum RMS Output Power
8 Ohms: 100 W + 100 W (0.019% THD)
6 Ohms: 120 W + 120 W (0.038% THD)
High Dynamic Power/Channel
140 / 170 / 220 / 290 W at 8 / 6 / 4 / 2 Ohms
Frequency Response
10 Hz – 100 kHz +/- 1.0 dB
Maximum power per channel
1 kHz, 0.7% THD, 4 Ohms: 160 W
IEC power
1 kHz, 0.019% THD, 8 Ohms: 115W
Power band width
0.04% THD, 50 W, 8 Ohms: 10 Hz to 50 kHz
Maximum Effective Output Power
1 kHz, 10% THD, 6 Ohms: 170 W
Input sensitivity/Input impedance
PHONO (MM): 3.0 mV/47 kOhmss
CD, etc: 200 mV/47 kOhmss
Maximum input signal
PHONO (MM) (1 kHz, 0. 03%THD): 45 mV or more
CD etc. (1 kHz, 0.5% THD): 2.2 V or more
Output level/Output impedance
REC OUT: 200 mV/1.0 kOhmss or less
SUBWOOFER OUT: 3.5 V/1.2 kOhmss
Phones jack rated output/Impedance
CD, etc. (Input 1 kHz, 200 mV, 8 Ohms: 470 mV/470 Ohms
RIAA equalization deviation
PHONO (MM): +/- 0.5 dB
Channel separation
CD, etc. (5.1 kOhmss input shorted,1kHz): 65 dB or more
CD, etc. (5.1 kOhmss input shorted,10 kHz): 50 dB or more
Bass
Boost/Cut (20 Hz): +/- 10 dB
Turnover frequency: 400 Hz
Treble
Boost/Cut (20 Hz): +/- 10 dB
Turnover frequency: 3.5 kHz
Continuous loudness control
– 30 dB
PCM word depth
24 bit/16 bit
Power supply
AC 120 V, 60 Hz
Power consumption
270 W
Standby power consumption
0.5 W
Maximum power consumption
580 W
Total Harmonic Distortion (CD to Sp Out)
0.019% (50 W / 8 Ohms)
Signal-to-Noise Ratio (CD)
99 dB (input shorted, 200 mV)
Damping Factor
240
Digital Input
Yes (optical / coaxial)
Audio In / Out
8 / 2
Subwoofer Out
Yes
Pure Direct
Yes
ToP-ART
Yes
Switchable CD Direct Amplification
Yes
DC out
Yes
Standby Power Consumption
0.5 W
Power Management (Auto Power Standby)
Yes
Dimensions (W x H x D)
17.12 x 6 x 15.25″ / 434.84 x 152.4 x 387.35mm
Weight
24.7lbs / 11.20kg

Reviews

There are no reviews yet.

Be the first to review “Yamaha A-S701 Integrated Amplifier, 290W Dynamic Power at 2 Ohms, 10Hz-100kHz Frequency Response, Black”

Your email address will not be published. Required fields are marked *

Quick Comparison

SettingsYamaha A-S701 Integrated Amplifier, 290W Dynamic Power at 2 Ohms, 10Hz-100kHz Frequency Response, Black removeYamaha R-N803 Hi-Fi Network Stereo Receiver with Bluetooth, Wi-Fi and Phono Input removeYamaha A-S1200 2-Channel Integrated Amplifier, Black removeOnkyo TX-NR6100 7.2-Channel 8K Network A/V Receiver, 210W Per Channel at 6 Ohms removeIogear Ultra-Fast 60GHz Wireless 4K UHD Transmitter & Receiver Kit for 2 TVs removeOnkyo TX-NR7100 9.2-Channel 8K/4K Network A/V Receiver, 220W Per Channel at 6 Ohms remove
Image
SKU027108948799645759385598027108958682881317519849889951003496
Rating
Price$565.56$565.56$2,120.96$564.89$424.16$776.99
Stock
Availability
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
ContentThe Yamaha A-S701 Integrated Black Amplifier is designed for pure sound quality and outstanding drive power. An integrated amplifier with the advantage of analog and digital inputs. High Quality Circuit Design Based on the ToP-ART (Total Purity Audio Reproduction Technology) Concept The amplifier design technology from Yamaha is called ToP-ART, which features an input to output with a direct symmetrical design. ToP-ART design and ART Base ensure optimum sound when processing and transmitting the audio signal. The signal is simple and direct, so therefore it is less likely to be affected by noise and distortion. The left and right channels are organized in a straight, symmetrical layout for the highest signal purity. In addition, the ART (Anti-Resonance and Tough) Base bottom chassis and a solid center bar provide high rigidity support and dampers vibration. These design innovations contribute to this amplifier's rich audio reproduction with abundant musicality. High Quality Parts for Outstanding Audio Performance Notice the custom-made power transformer, custom-made block capacitors, two direct signal path speaker relays, one point grounding system, extruded aluminum heat sinks and other top-quality parts to effortlessly handle demanding audio conditions. The quality of each individual part, as well as how they work together, basically determines the sound quality of this component. Yamaha uses only very high quality parts, carefully selected and tested for their sound properties. Created by Rich Experience, Tradition and High Technological Expertise Yamaha, with a long history of over 125 years as a musical instrument maker, also has a high reputation for Hi-Fi components. The A-S301 is created by taking advantage of this rich experience and high technological expertise. Based on the concept of "Natural Sound" for reproducing all music as it really sounds, this amplifier is built with scrupulous care from its circuit design to basic sound production CD Direct Amplification and Pure Direct Mode for Greater Sound Purity With a straight connection to the CD input, CD Direct Amplification maximizes the CD source's signal to noise ratio. Additionally, engaging the Pure Direct mode causes the music signals to travel the shortest possible circuit route, bypassing the buffer amp, the tone, loudness and balance controls to virtually eliminate any signal degradation for the purest sound quality.. Continuously Variable Loudness Control The A-S301 also features a new analog loudness control on the front panel that uses electronic volume for higher sound quality, which lets you adjust the loudness effect as desired. Separate from the overall volume, this controls the balance of the low and high frequencies, providing full tonal range at any volume level by compensating for the natural loss in the human ear at soft levels. Gold Plated Terminals Gold plated terminals ensure a high quality connection that prevents signal loss. The A-S501 has gold plated speaker and input terminals. Digital Audio Input for TV and/or Blu-ray Disc Player The A-S301 is equipped for digital audio inputs with an optical and digital coaxial input terminal. The optical is for receiving audio from a TV and the coaxial for receiving audio from a Blu-ray Disc player. The audio stays in the digital domain, giving you pure, pristine and dynamic sound for all of your entertainment sources. Connection for YBA-11 Bluetooth Wireless Adapter (Optional Accessory) With the YBA-11, you'll be able to stream music wirelessly from a Bluetooth compatible mobile phone or a PC. Thanks to the digital coaxial connection and the aptx audio coding algorithm, you will enjoy wireless music streaming with optimum sound quality. You can also conveniently power the YBA-11 via the DC out connection on the rear panel of this amplifier. Speaker A, B or A+B Selection and Speaker Terminals for Two Systems You can connect two separate speaker systems and hear them in different rooms at the same time. There are four terminals, so by just rotating a simple selector dial, you can switch between the two pairs of speakers to play the selected source. Subwoofer Terminal A terminal for connecting a subwoofer is provided, allowing you to increase the bass output of your system for a more powerful sound with better overall sound quality. Phono Moving Magnet Input Terminal You can connect a turntable with a MM phono cartridge to play vinyl records. Get the best of both worlds whether listening to analog vinyl or the latest digital technology. Simple Yet Sophisticated Design With a beautiful, simple and unique design inherited directly from Yamaha Hi-Fi audio components, this amplifier also boasts an easy to operate layout. The aluminum front panel has a richly textured silver hairline finish. The control knobs are also of the same luxurious construction as used on top end models. Remote Control with Clean, Simple Design The clean, simple design of the remote control provides easy to understand operation with a single hand. The design makes it simple to adjust inputs, volume and more. The unit has a sophisticated looking hairline finish that matches the design of the amplifiers. You can also use the remote to control a Yamaha CD player. Rotary Encoder Input Selector with LEDs The rotary encoder makes it quick and easy to select input sources. The luxurious hairline finish offers a nice tactile feeling. LEDs clearly show which source is selected, so you can easily switch sources, even in a dark room. Auto Power Standby Function When Auto Power Standby is engaged, the amplifier will automatically shift itself into standby mode when a user function has not been executed in eight hours. This is a great function if you forget to turn the amplifier off and it will help minimize power consumption when the unit is not in use.
This product can only be shipped to U.S. addresses.

Yamaha A-S701 Specifications

Minimum RMS Output Power
8 Ohms: 100 W + 100 W (0.019% THD) 6 Ohms: 120 W + 120 W (0.038% THD)
High Dynamic Power/Channel
140 / 170 / 220 / 290 W at 8 / 6 / 4 / 2 Ohms
Frequency Response
10 Hz - 100 kHz +/- 1.0 dB
Maximum power per channel
1 kHz, 0.7% THD, 4 Ohms: 160 W
IEC power
1 kHz, 0.019% THD, 8 Ohms: 115W
Power band width
0.04% THD, 50 W, 8 Ohms: 10 Hz to 50 kHz
Maximum Effective Output Power
1 kHz, 10% THD, 6 Ohms: 170 W
Input sensitivity/Input impedance
PHONO (MM): 3.0 mV/47 kOhmss CD, etc: 200 mV/47 kOhmss
Maximum input signal
PHONO (MM) (1 kHz, 0. 03%THD): 45 mV or more CD etc. (1 kHz, 0.5% THD): 2.2 V or more
Output level/Output impedance
REC OUT: 200 mV/1.0 kOhmss or less SUBWOOFER OUT: 3.5 V/1.2 kOhmss
Phones jack rated output/Impedance
CD, etc. (Input 1 kHz, 200 mV, 8 Ohms: 470 mV/470 Ohms
RIAA equalization deviation
PHONO (MM): +/- 0.5 dB
Channel separation
CD, etc. (5.1 kOhmss input shorted,1kHz): 65 dB or more CD, etc. (5.1 kOhmss input shorted,10 kHz): 50 dB or more
Bass
Boost/Cut (20 Hz): +/- 10 dB Turnover frequency: 400 Hz
Treble
Boost/Cut (20 Hz): +/- 10 dB Turnover frequency: 3.5 kHz
Continuous loudness control
- 30 dB
PCM word depth
24 bit/16 bit
Power supply
AC 120 V, 60 Hz
Power consumption
270 W
Standby power consumption
0.5 W
Maximum power consumption
580 W
Total Harmonic Distortion (CD to Sp Out)
0.019% (50 W / 8 Ohms)
Signal-to-Noise Ratio (CD)
99 dB (input shorted, 200 mV)
Damping Factor
240
Digital Input
Yes (optical / coaxial)
Audio In / Out
8 / 2
Subwoofer Out
Yes
Pure Direct
Yes
ToP-ART
Yes
Switchable CD Direct Amplification
Yes
DC out
Yes
Standby Power Consumption
0.5 W
Power Management (Auto Power Standby)
Yes
Dimensions (W x H x D)
17.12 x 6 x 15.25" / 434.84 x 152.4 x 387.35mm
Weight
24.7lbs / 11.20kg
Beautifully Brainy The elegant design of the R-N803 is equally matched with powerful brainy internals - a full suite of modern technological and connectivity features make the receiver even more captivating and result in a receiver worthy to take home to your Wi-Fi and Hi-Fi. Experience the Legend, Enjoy the Musicality The legendary Yamaha Hi-Fi design concept ToP-ART (Total Purity Audio Reproduction Technology) combines a meticulously symmetrical left/right circuit layout and signal directness (straightest, shortest signal paths) with a low-vibration chassis of high rigidity. The chassis is equipped with the special resin frame "Art Base" that absorbs and blocks unnecessary vibration. The result is sonic purity and an accurate stereo image of your music. High Precision, High Performance The R-N803 uses the renowned SABRE 9006AS 192 kHz/24-bit DAC (from ESS technology) to deliver superior signal-to-noise ratio performance. Combined with the Yamaha original network module, the unit thoroughly draws out all the sonic merits of high-resolution sound sources, effectively reproducing even the subtle ambience of concert halls and delicate expressive nuances in the sound. Optimized for the Ultimate For the first time in a Hi-Fi receiver, the R-N803 is equipped with the Yamaha Parametric room Acoustic Optimizer (YPAO), a famed technology used in Yamaha AV receivers. It measures the shape of the room, the material of the wall and the position of the speaker, then automatically adjusts the sound to create the ideal response and sonic quality. The unit also features other advanced YPAO functions, including YPAO - Reflected Sound Control, which actively corrects the important early reflection sounds that greatly influence sound quality and YPAO Volume, which applies exceptionally high-precision EQ (equalization), with 192 kHz / 64-bit operation. The result? You can create an ideal listening environment right in your home, just like that of a professional audio listening room. Sound Purity Pure Direct mode enables the music signals to travel the shortest possible circuit route, bypassing the buffer amp and the tone, loudness and balance controls to virtually eliminate any signal degradation, for the purest sound quality. Pure Delight to Own This receiver inherits the simple and sophisticated design style for which Yamaha Hi-Fi audio is famous. Its elegant simplicity beautifully complements your other Hi-Fi audio components. The stylish design with high-quality materials deepens both the joy of ownership and the joy of listening. Sophisticated Circuit Design The power amp block adopts a symmetrical and direct circuit layout based on the ToP-ART concept, featuring a parallel push-pull structure using a total of eight bipolar-type power transistors (four each, on left and right) as its output terminals. And by minimizing the lengths of the audio signal paths in the circuit design, we've lowered impedance to achieve superb drive power with a maximum output of 145 watts (per channel). Wireless The R-N803 is equipped with Bluetooth to let you enjoy music playback from smartphones and other devices. MusicCast Access all of your music with a simple app and wirelessly stream it throughout your home using your existing Wi-Fi network. Stream it all Listen to Pandora, Spotify, Napster, SiriusXM Internet Radio, TIDAL, Deezer, thousands of free internet radio stations and the music stored on your smart devices and computers. Wireless connectivity All MusicCast products are fully loaded with Wi-Fi, Bluetooth and AirPlay. Expand to a whole home audio experience When you're ready, add MusicCast wireless speakers, sound bars or other devices in up to 9 other rooms and listen throughout your home. No wires, easy installation By using MusicCast, you don't need to fuss with placing wires through walls into other rooms. Alexa on MusicCast Amazon Alexa-enabled devices - including Echo, Dot, Tap and Show - can now control key functions of any MusicCast product using voice commands. Discover a new, exciting way to control music and entertainment experiences in your home. Optical TV Input The R-N803 is equipped for digital audio input with both audio and coaxial terminals. With an optical input, TV sound reaches new sonic platforms - pure, pristine and dynamic sound for all entertainment sources, from sports and other programs to movies and concerts. Love for Vinyl Throw your vinyl collection love and drop a needle with the phono input terminal that connects the R-N803 to a record player. Discover New Favorites Explore. Compatible with a large variety of popular streaming services, including Spotify, TIDAL, Deezer, Napster and others - the R-N803 encourages discovery of new music from all over the world.

Yamaha R-N803 Features

  • Beautiful and elegant front aluminum face with two channels of 145 W high-power output (0.019% THD)
  • Phono input terminals for turntables and optical/coaxial audio inputs for TV
  • Wireless Direct, Bluetooth, AirPlay and Wi-Fi to access to your music library, Pandora, Spotify, SiriusXM Internet Radio, TIDAL and Deezer
  • YPAO - Yamaha's acoustic optimizer with Precision EQ, Volume and Reflected Sound Control
  • Pure Direct and ToP-ART design to faithfully preserve the integrity of your music
  • DSD 5.6 MHz, FLAC / WAV / AIFF 192 kHz / 24-bit, Apple Lossless 96 kHz / 24-bit playback
  • Add audio in up to 9 additional rooms with MusicCast
  • Voice control using your Alexa device like Echo or Echo Dot

Yamaha R-N803 Specifications

Network Section
Wi-Fi with Wireless Direct DLNA version 1.5 (DMR) Apple AirPlay Bluetooth version 2.1 + EDR, A2DP, AVRCP, SBC/AAC (receiving only)
Supported File Formats
MP3, WMA, MPEG4 AAC 48 kHz / 320 kbps, WAV, FLAC, AIFF 192 kHz / 24-bit, ALAC 96 kHz / 24-bit, DSD 2.8 / 5.6 MHz
Minimum RMS Output Power
100W + 100W (8Ohms, 20 Hz-20 kHz, 0.019% THD)
Maximum Power
160W + 160W (4Ohms, 1kHz, 0.7% THD, for Europe) 145W + 145W (8Ohms, 1 kHz, 10% THD)
High Dynamic Power/Channel
140 / 170 / 220 / 290W (8/6/4/2Ohms)
Frequency Response
0 +/- 0.5 dB / 0 +/- 1.0 dB
Signal-to-Noise Ratio
100dB (Pure Direct on, 200mV) (CD)
Damping Factor
A Speakers, at 1 kHz: >=240 (8Ohms)
Tuner Type
AM/FM
Audio In / Out
10/2
Inputs
2x Optical TOSLINK 2x Digital coaxial 1x Stereo RCA phono with ground screw 4x Stereo RCA 1x USB (front)
Outputs
2x Stereo RCA 1x 1/4" (6.35 mm) Headphone (front)
Other Connectors
1x Ethernet LAN 1x FM antenna 1x AM antenna 1x Mono RCA subwoofer out 1x Trigger out
Speaker Connectors
2 (L/R)
FM 50dB Quieting Sensitivity
3 MuV (20.8 dBf) (IHF, 1 kHz, 100% Mod., Mono)
FM Signal-to-Noise Ratio
69 dB/67 dB (Mono/Stereo)
Pure Direct
Yes
ToP-ART
Yes
Standby Power Consumption
0.1W Wired/Wi-Fi/Bluetooth, Network Standby On: 1.8W Wireless Direct, Network Standby On: 1.9W
Dimensions (WxHxD)
17.13 x 6 x 15.44" (43.51 x 15.24 x 39.22cm) With antenna up: 17.13 x 8.5 x 15.44" (43.51 x 21.59 x 39.22cm)
Weight
24.3 lbs (11.02kg)
Acknowledging the golden era of Hi-Fi with its beautiful design, the A-S1200 boasts an impressive array of the latest technology to accurately deliver an emotional, purely musical sound. Nostalgic Hi-Fi design. Today's Hi-Fi technology A nod to the past with the latest technology for a purely musical sound. Emotion Understanding music is to understand the emotion upon which music is created - the passion and story behind the music that drives artists to create. With unmatched experience in every facet of music creation, embedded deep in the Yamaha DNA is an intimate understanding of the emotional essence of music and music creation. Conveying the artists' emotion through our Hi-Fi equipment is a fundamental component of the Yamaha design philosophy. >Toroidal Transformer Usually reserved for flagship Hi-Fi components, the A-S1200 benefits from the technical proficiency and absolute musicality of a toroidal transformer. Combined with an array of high-end Hi-Fi features and components, the toroidal transformer assists in ensuring the musical emotion is conveyed to the listener. Gorgeous Level Meters The level meters are both a nod to the nostalgic era of Hi-Fi, while simultaneously demonstrating the return of pure Hi-Fi for today's discerning enthusiast. Visually presenting the dynamics and pulse of the music, the level meters imbue a warm feeling through their softly illuminated LEDs. Openness An open sound stage presents the listener with a musical experience that is similar to being at the live performance. True Hi-Fi delivers this openness in the sound, transforming the listeners' musical experience, bringing them closer to the artist. Thick Wires for Ground Connection Our low Impedance concept, aided by the thick wires for ground connection, is critical for componentry adopting the badge of premium Hi-Fi. This Yamaha design concept begins in our premium Hi-Fi components with the A-S1200, helping to present an open, natural sound stage, bringing the artist and listener closer together. Original Speaker Terminals Cut directly from pure brass, the luxurious speaker terminals comfortably fit the human hand for effortless tightening, achieving a highly secure connection. Groove Connection with the music is achieved with the underlying groove and rhythm. A true representation of the music lets the listener feel the groove, and therefore not just hear the music but feel the story behind the music. Mechanical Ground Concept The A-S1200 adopts a Mechanical Ground Concept, inherited from both the A-S2200 and A-S3200. The concept begins with the bolts of the feet welded directly to the main chassis, followed with the large heat sink, power transformer and block capacitors also directly bolted to the chassis. Through this design, unwanted vibration is avoided, achieving expressive and rhythmic bass, presenting the 'Groove' of the music to the listener. Chrome-Plated Iron Feet Completing the rigidity of the amplifier are the heavy-duty chrome-plated iron feet.

Yamaha A-S1200 Features

  • High quality components delivering exceptional musical expression
  • Toroidal power transformer with enormous energy for a pure musical sound
  • Gorgeous level meters convey dynamics and music pulse with a nod to the nostalgic Hi-Fi era
  • Floating balanced power amplifier
  • Mechanical ground concept maximizes rigidity for expressive and rhythmic bass
ColorBlackRated output power 2-channel driven8Ohm: 90 W + 90 W 4Ohm: 150 W + 150 W (20 Hz to 20 kHz, 0.07% THD)Dynamic power8Ohm: 105 W + 105 W 6Ohm: 135 W + 135 W 4Ohm: 190 W + 190 W 2Ohm: 220 W + 220 WIEC output power8Ohm: 95 W + 95 W (1 kHz, 0.07% THD)Maximum effective output power8Ohm: 120 W + 120 W 4Ohm: 190 W + 190 WPower bandwidth 2-channel driven8Ohm: 10 Hz to 50 kHz (0.1% THD, 45 W)Damping factor8Ohm: 250 or higher(1 kHz)Input sensitivityPHONO (MC): 150 micro Vrms / 50Ohm PHONO (MM): 3.5 mVrms / 47 kOhm CD (or similar): 200 mVrms / 47 kOhm MAIN IN: 1 Vrms / 47 kOhmMaximum inputPHONO (MC): 2.0 mVrms PHONO (MM): 50 mVrms CD (or similar): 2.80 VrmsRated output voltageLINE 2 OUT: 200 mVrms / 1.5 kOhm PRE OUT: 1 Vrms / 1.5 kOhmHeadphone jack rated output power25 mW + 25 mW (1 kHz, 32 Ohm, 0.2% THD)Frequency response5 Hz to 100 kHz: +0 / -3 dB 20 Hz to 20 kHz: +0 / -0.3 dBDeviations from RIAA equalizerPHONO (MM/MC): +/-0.5 dBTotal harmonic distortion plus noise2-channel driven: PHONO (MC) - LINE 2 OUT, 1.2 Vrms: 0.02% PHONO (MM) - LINE 2 OUT, 1.2 Vrms: 0.005% CD (or similar) - SPEAKERS OUT, 50 W/8Ohm: 0.035% Signal-to-noise ratioPHONO (MC): 90 dB PHONO (MM): 96 dB CD (or similar): 110 dBResidual noise50 micro VrmsChannel separationPHONO (MC): 66/77 dB or higher PHONO (MM): 90/77 dB or higher CD (or similar): 74/54 dB or higherTone control characteristicsBASS: Boost/cut: 50 Hz / +/-9 dB Turnover frequency: 350 Hz TREBLE: Boost/cut: 20 kHz / +/-9 dB Turnover frequency: 3.5 kHzPower supplyAC 120 V, 60 HzPower consumption350 WStandby power consumptionOFF mode: 0.1 W Standby mode: 0.2 WDimensions (W x H x D)17.13 x 6.13 x 18.25" (43.49 x 15.57 x 46.35cm)Weight48.5 lbs (22kg)
Massive THX sound and Film-Like 8K resolution Rigorously tested to receive the coveted THX Select Certification, the Onkyo TX-NR6100 7.2-Channel AV Receiver delivers precision sound and images. With an emphasis on an enhanced gaming experience, own your opponents with HDMI 2.1 enhancements for gamers: 4K/120Hz HDR pass-through enables ultra-fast motion -VRR (Variable Refresh Rate) eliminates lag, stutter, and frame-tearing for fluid gameplay. - ALLM (Auto Low Latency Mode) optimizes latency from source to screen - QFT (Quick Frame Transport) limits lag for a smoother experience. Setting the bar for reference sound while bringing 8K video to your compatible display over HDMI 2.1, you can enjoy Dolby Atmos and DTS: X soundtracks through your height-enabled surround system or use upmixing and virtualization solutions from DTS and Dolby to create a 3D sound-field from any layout. Featuring three HDMI outputs and 100 watts of power per channel, the TX-NR6100 AV receiver delivers uncompressed HDMI 2.1 8K 60Hz and 4K/120Hz with HDR over 40 gbps, increasing the bandwidth over its predecessors. This SMART AV Receiver delivers an unparalleled movie, music, and gaming experience to your living room. HDMI 2.1 with 8K HDMI 2.1 is the most recent update of the HDMI spec and supports eARC, a range of higher video resolutions and refresh rates including 8K60 and 4K120, and Dynamic HDR formats. 8K delivers a super-immersive viewing experience with 2x the horizontal and vertical resolution of 4K, and 4 times as many pixels; and combined with 60Hz refresh rate enables smooth and sharp viewing of content with high-speed action. HDMI 2.1 with 8K and eARC ensures your system is ready for the clearest and cleanest picture available both now and down the road. Ultimate 4K Gaming Experience Own your opponents with HDMI 2.1 enhancements for gamers: 4K/120Hz HDR pass-through enables ultra-fast motion -VRR (Variable Refresh Rate) eliminates lag, stutter, and frame-tearing for fluid gameplay. - ALLM (Auto Low Latency Mode) optimizes latency from source to screen - QFT (Quick Frame Transport) limits lag for a smoother experience. THX Certified In 1993, Onkyo became the first consumer electronics brand to be THX-certified. With literally thousands of tests, before earning the THX-certification logo: no matter what input is used, no matter what combination of the many built-in features for the AVR, preamplifier, or amplifier, there can be absolutely nothing added, nothing taken away from the source material. Built-In Streaming Services Access to Spotify, TIDAL, Deezer, TuneIn, and Pandora are built into the system. Use dedicated apps (where available) or the free Onkyo Control App for Apple and Android devices to find and play music. Discrete Zone 2 HDMI Switching Set up different Ultra High-Definition entertainment options with up to 8K60 resolution* in two different rooms from your Onkyo receiver. Watch a movie in the home theater, while the kids watch cartoons in their playroom. Smart Home Compatible with Voice Control Onkyo receivers easily integrate into your existing Smart Home ecosystem, including Apple Airplay, Alexa, Google apps, and more. You get a highly capable and compatible network device that can operate seamlessly in your multi-room ecosystem. Works with SONOS Certified This receiver can join your existing Sonos Home Sound System, or be the start of a new one, just by pairing it with a Sonos Port. This works with Sonos Certified AVR offers a best-in-class tie-in to the Sonos ecosystem, waking, changing inputs, and playing at the volume you want using the Sonos Volume-Pass Through feature from the Sonos app. Bi-Directional Bluetooth Wireless Technology This Onkyo AVR can send and receive audio via Bluetooth wireless technology. Stream from your device to the receiver using SBC or AAC codecs, or transmit audio playing through the AVR to compatible wireless headphones using SBC, aptX, or aptX HD codecs including 24-bit audio over aptX HD. The improved data transfer capabilities of the latest generation of Bluetooth ensure clear and reliable sound reproduction so you hear your favorite songs just as the recording engineer intended. Ready for DTS PLAY-FI DTS Play-Fi allows you to enjoy high-quality music from connected online services, networked media servers, and your device library over Wi-Fi to any number of compatible products using the Onkyo Music Control App for iPad, iPhone, and Android smartphones/tablets. DTS Play-Fi can synchronize the music in every room. Each member of your family can use their own device to listen to their music in a room or group of rooms. DTS Play-Fi lets you structure a comprehensive multi-room ecosystem that satisfies virtually any need.

Onkyo TX-NR6100 Features

  • 8K with HDMI 2.1 40Gbps (3 ins)
  • THX Select Certification
  • Discrete Zone 2 Audio and Video
  • 210 W/Ch THX Certified Select Dynamic Audio Amplification system
  • 5.2.2-channel Dolby Atmos and DTS:X playback
  • AccuReflex phase-matching solution for Atmos-enabled speakers
  • SMART AV Receiver
  • Works with Hey Google or Alexa
  • Stream over 5 GHz/2.4 GHz dual-band Wi-Fi supporting the 802.11ac standard
  • HDMI Sub/Zone 2 Out for media transmission to a second display
  • Send or receive audio via Bluetooth wireless technology
  • Refined chassis, HDMI board, DAC, Digital/Analog inputs, power-amp grounds and power lines
  • 5.2-ch Main + Powered Zone 2 speakers support synced/independent D/A audio playback
  • Zone 2/Zone B line-out

Amplifier

Power Output (All Channels)
210 W/Ch (6 ohms, 1 kHz, 10% THD,1-ch driven) 100 W/Ch (8 ohms, 20 Hz-20 kHz, 0.08% THD, 2-ch driven, FTC)
Dynamic Power
240 W (3 ohms, Front) 210 W (4 ohms, Front) 120 W (8 ohms, Front)
THD+N (Total Harmonic Distortion+Noise)
0.08% (20 Hz-20 kHz, half Power)
Input Sensitivity and Impedance
200 mV rms/47 k-ohms (Line) 3.5 mV rms/47 k-ohms (Phono MM)
Rated RCA Output Level and Impedance
1 V rms/470 ohms (Subwoofer pre-out) 200 mV rms/470 ohms (Zone 2/Zone B line-out)
Frequency Response
10 Hz-100 kHz/+1 dB, -3 dB (Direct/Pure Audio)
Tone Control
+/-10 dB, 20 Hz (Bass) +/-10 dB, 20 kHz (Treble)
Signal-to-Noise Ratio
106 dB (Line, IHF-A) 80 dB (Phono, IHF-A)
Speaker Impedance
4-16 ohms

Tuner

FM
87.5 MHz-107.9 MHz
AM
530 kHz-1,710 kHz
FM/AM Preset Memory
40 stations

General

Power Supply
AC 120 V-, 60 Hz
Power Consumption
Operating: 635 W Idle: 65 W Standby: 0.1 W
Dimensions (W x H x D)
17.12 x 6.8 x 14.94" (435 x 173.5 x 379.5mm)
Weight
21.7 lbs (9.8kg)

About IOGEAR GW4K30GH60KIT

Eliminate Cables Without Sacrificing 4K HD Quality With support for full UHD resolutions up to 4K @30Hz, the Ultra-Fast 60GHz Wireless 4K UHD Transmitter & Receiver Kit for 2 TVs can offer flexibility to place your 4K HDTV or HD projector anywhere up to 40 ft. or 12 meters in-room wirelessly from the HD video source without sacrificing picture and sound quality. With near-zero latency, exceptional video resolutions of 3840 x 2160 and support for the newest 4K UHD High Dynamic Range TVs and content, the Ultra-Fast Wireless Transmitter and Receiver Kit enable both video and audio to be broadcast without any delay in real time. Save the time and expense of hiring installers to run messy HDMI cables through ceilings and walls. • up 4K @30Hz • up to 40' • Near Zero Latency Perfect for Medical, Office and Educational Settings The Ultra-Fast 60GHz Wireless 4K UHD Transmitter & Receiver Kit for 2 TVs is an ultra-high-performance wireless AV solution that enables professionals to transmit 4K Ultra High Definition video and audio from an HDMI source over distances up to 40 feet with near-zero latency to up to two (2) displays at the same time from one video source. Use the wirelessly flexibility of up to 40 ft. to share content within medicals bays, research laboratories or university settings. Display messages and 4K video content to Customers via UHDTV displays in office lobbies or within waiting rooms of medical office. Connect wirelessly to digital HDMI sign devices to relay important information in hallways, manufacturing floors or hospitality environments without the need to install lengthy wire runs or security configurations with existing Wi-Fi networks. Limited Interference - Dedicated Wireless Utilizing the 60GHz frequency band for AV guards the extender against interference from common wireless devices that transmit on the 2.4 or 5GHz frequency bands such as most smartphones, laptops and IoT devices as well as Wi-Fi routers and access points. The extender provides a dedicated connection for your content, does not require an existing Wi-Fi network and is quick and easy to set up, simply plug in and press play! Eliminate Cables Without Sacrificing 4K Quality Hide your A/V equipment out of sight across thro om, keeping your HDTVs cable free while avoiding the clutter and the eyesore of cabling. With wireless flexibility, move your HDTV setups to different parts of the room, office or lobby without the mess of wires. Hassle-Free Setup The Ultra-Fast 60GHz Wireless 4K UHD Transmitter & Receiver Kit for 2 TVs comes with everything you need inside the box to get started. Connect the include HDMI cables between your source HDMI-enabled video source and the Ultra-Fast transmitter and connect the Ultra-Fast receivers to the 4K displays or TVs. Plug in power to both, sync and you are ready to enjoy the video content. The transmitter and receivers do not require or need a Wi-Fi network or complicated security configurations and will not interfere with any 802.11AD (60GHz band) routers. The included transmitter and receivers come ready with security enabled and are paired to create an independent wireless network connection.

IOGEAR GW4K30GH60KIT Features

  • Wirelessly send 4K UHD video from one HDMI source to 2 HDMI TV/Projectors
  • Extends signals up to 40 Ft. line-of-sight
  • Uncompressed audio and video at near-zero latency - ideal for gaming and streaming
  • Resolutions up to 3840 x 2160 @30Hz
  • Minimal interference with existing Wi-Fi devices via 60GHz wireless frequency
  • Support Master audio format
  • Plug-n-Play - Transmitter and receiver come pre-paired from factory
  • Dedicated closed wireless system - Requires no Wi-Fi network
  • Advanced wireless technology speeds to 18 Gbps
  • LED status lights for source/display connections and wireless link
  • Compact mountable design for easy placement
  • HDMI 1.4 & HDCP 2.2 compliant
  • Supports 4K UHD TVs and content

IOGEAR GW4K30GH60KIT Specifications

Requirement
Video source with HDMI output Video display with HDMI input
Video
Output: HDCP 2.2 Support input: HDCP 2.2
Power
5V/1A
Video Resolution
3840 x 2160 @ 30Hz
Video Streaming
Uncompressed
Audio Output
LPCM Stereo
Frequency Band
60 GHz
Antenna Type
Printed Circuit Board
Operation Temperature
32-122 Degree F (0-50 Degree C)
Storage Temperature
14-158 Degree F (-10-70 Degree C)
Humidity
10 - 90%
Power Adapter
Input: 100-240 VAC/0.3A, Output: 5VDC/2A
Case
Aluminum
Power Consumption
3W
Dimensions
3 x 1.2 x 4" (76 x 30.4 x 101.2mm)
Weight
Rx: 8.7 oz (249g) Tx: 19.9 oz (566g)
DIRAC Live Room Correction Built-in, state-of-the-art digital room correcting technology improves overall audio performance. Dirac Live automatically calibrates sound in your room using our smartphone app and included microphone or the Dirac Live desktop or laptop application and a 3rd party USB mic (not included). Dirac Live unlocks your loudspeakers' full potential in any listening space and delivers a uniquely pristine listening experience. Discrete Zone 2 HDMI Switching Set up different high-definition entertainment options with up to an 8K60 resolution. IMAX Enhanced Bring larger-than-life home. Using DTS X technology, IMAX Mode delivers lMAX Enhanced content as the filmmakers intended. IMAX Enhanced films are available to stream or own on Ultra HD Blu-ray. Enhanced Gaming Own your opponents with HDMI 2.1 enhancements for gamers 4K/120Hz HDR pass-through enables ultra-fast motion -VRR (Variable Refresh Rate) eliminates lag, stutter, and frame-tearing for fluid gameplay. - ALLM (Auto Low Latency Mode) optimizes latency from source to screen - QFT (Quick Frame Transport) limits lag for a smoother experience. Stream your favorite music Use Works with Sonos 1, Chromecast built-in, AirPlay 2, and DTS Play-Fi; includes Spotify, Amazon Music, Pandora, TIDAL, Deezer, or TuneIn streaming services. THX Certified Select Theater-Reference Sound Guarantees the same reference volume of a commercial theater in rooms where the screen-to-seat distance is about 12 ft. (3.5 m). Roon Roon plays to thousands of USB, Airplay, and Chromecast devices, but Roon-tested devices are profiled by the Roon team to ensure simple setup and effortless daily use. If you own a Roon Tested device, you can have the confidence that you will enjoy the best possible experience with it. Immersive Sound from your TV Apps eARC (Enhanced Audio Return Channel) simplifies connectivity and supports the latest high-bitrate audio formats including Dolby Atmos, DTS-HD Master Audio, DTS X, Dolby TrueHD. Voice Control Work with your digital assistant in any room with easy Google and Amazon Alexa SMART home ecosystem integrations. Stereo Height Channel Flexibility Set the mood for your next gathering by using height or surround speakers to ensure sound is distributed evenly throughout the room. By being able to move the stereo sound to height speakers, it blankets the space more evenly, giving everyone a better experience. DIRAC Live Room Correction Built-in to the TX-NR7100 and ready to use, this state-of-the-art digital room correction technology will optimize your speakers' overall audio performance for enhanced musical staging, clarity, dialog, and deeper bass. You can easily calibrate your home theater system using the free Onkyo Control App for Android and iOS devices and the included microphone for 3-9 positions or the free Dirac Live laptop app for up to 13 positions and a 3rd-party USB mic. Discrete Zone 3 HDMI Switching Set up different high-definition entertainment options with up to 8K60 resolution in two different rooms from your Onkyo receiver when the kids don't feel like partaking in whatever you like or vice versa. IMAX Enhanced Mode IMAX digitally re-mastered content for the home environment is created to provide the same sharp 4K HDR images and powerful sound just as the filmmaker intended. Onkyo's IMAX Mode is meticulously optimized to play digitally remastered content to deliver the best viewing and listening experience on Earth. HDMI 2.1 with 8K HDMI 2.1 is the most recent update of the HDMI spec and supports eARC, a range of higher video resolutions and refresh rates including 8K60 and 4K120, and Dynamic HDR formats. 8K delivers a super-immersive viewing experience with 2x the horizontal and vertical resolution of 4K, and 4 times as many pixels; and combined with 60Hz refresh rate enables smooth and sharp viewing of content with high-speed action. HDMI 2.1 with 8K and eARC ensures your system is ready for the clearest and cleanest picture available both now and down the road. Built-In Streaming Services Access to Spotify, TIDAL, Deezer, TuneIn, and Pandora are built into the system. Use dedicated apps (where available) or the free Onkyo Control App for Apple and Android devices to find and play music. THX Certified In 1993, Onkyo became the first consumer electronics brand to be THX-certified. With literally thousands of tests, before earning the THX-certification logo: no matter what input is used, no matter what combination of the many built-in features for the AVR, preamplifier, or amplifier, there can be absolutely nothing added, nothing taken away from the source material. The TX-NR7100 offers four distinct THX listening modes: cinema, gaming, music, and surround EX. Ultimate 4K Gaming Experience Own your opponents with HDMI 2.1 enhancements for gamers: 4K/120Hz HDR pass-through enables ultra-fast motion -VRR (Variable Refresh Rate) eliminates lag, stutter, and frame-tearing for fluid gameplay. - ALLM (Auto Low Latency Mode) optimizes latency from source to screen - QFT (Quick Frame Transport) limits lag for a smoother experience. Smart Home Compatible with Voice Control The Onkyo TX-NR7100 9.2-Channel THX Certified AV Receiver easily integrates into your existing Smart Home ecosystem, including Apple Airplay, Alexa, Google apps, and more. You get a highly capable and compatible network device that can operate seamlessly in your multi-room ecosystem. Works with SONOS Certified This receiver can join your existing Sonos Home Sound System, or be the start of a new one, just by pairing it with a Sonos Port. This works with Sonos Certified AVR offers a best-in-class tie-in to the Sonos ecosystem, waking, changing inputs, and playing at the volume you want using the Sonos Volume-Pass Through feature from the Sonos app. The TX-NR7100 can work with up to three Sonos Ports-one for each of three independent zones-each playing a completely different streaming service from Sonos Radio. Bi-Directional Bluetooth Wireless Technology This Onkyo AVR can send and receive audio via Bluetooth wireless technology. Stream from your device to the receiver using SBC or AAC codecs, or transmit audio playing through the AVR to compatible wireless headphones using SBC, aptX, or aptX HD codecs including 24-bit audio over aptX HD. The improved data transfer capabilities of the latest generation of Bluetooth ensure clear and reliable sound reproduction so you hear your favorite songs just as the recording engineer intended. DTS Play-Fi allows you to enjoy high-quality music from connected online services, networked media servers, and your device library over Wi-Fi to any number of compatible products using the Onkyo Music Control App for iPad, iPhone, and Android smartphones/tablets. DTS Play-Fi can synchronize the music in every room. Each member of your family can use their own device to listen to their music in a room or group of rooms. DTS Play-Fi lets you structure a comprehensive multi-room ecosystem that satisfies virtually any need.  

Onkyo TX-NR7100 Features

  • 220 W/Ch Select Dynamic Audio Amplification (DAA) system (6 ohms), 100 W/Ch (8 ohms)
  • 5.2.4-ch/7.2.2-ch Dolby Atmos and DTS: X playback
  • Dolby Atmos Height Virtualizer and DTS Virtual:
  • Stream over 5 GHz/2.4 GHz dual-band Wi-Fi
  • Send or receive audio via bi-directional Bluetooth Wireless Technology
  • Apple AirPlay 2
  • Works with Hey Google or Alexa
  • Music Made Easy with Chromecast built-in
  • Supports Dirac Live Room Correction (20Hz to 20kHz)
  • AccuReflex phase-matching solution for Atmos-enabled speakers
  • SMART AV Receiver
  • HDMI Sub/Zone 2 Out for media transmission to a second display
  • Send or receive audio via Bluetooth wireless technology
  • Refined chassis, HDMI board, DAC, Digital/Analog inputs, power-amp grounds and power lines
  • Zone 2/Zone B line-out

Key Features

  • 220 W/Ch Select Dynamic Audio Amplification (DAA) system (6 ohms), 100 W/Ch (8 ohms)
  • 5.2.4-ch/7.2.2-ch Dolby Atmos and DTS: X playback
  • Dolby Atmos Height Virtualizer and DTS Virtual:
  • Stream over 5 GHz/2.4 GHz dual-band Wi-Fi
  • Send or receive audio via bi-directional Bluetooth Wireless Technology
  • Apple AirPlay 2
  • Works with Hey Google or Alexa
  • Music Made Easy with Chromecast built-in

What's in the box:

  • Onkyo TX-NR7100 9.2-Channel 8K/4K Network A/V Receiver
  • Power Cord
  • Indoor FM Aantenna
  • AM loop Antenna
  • Speaker Setup Microphone
  • Quick Start Guide
  • Remote Control
  • 2x AAA (R03) Batteries
  • Onkyo 2 Year Limited Warranty

AmplifierJump to...

Power Output (All Channels)
210 W/Ch (6 ohms, 1 kHz, 10% THD,1-ch driven) 100 W/Ch (8 ohms, 20 Hz-20 kHz, 0.08% THD, 2-ch driven, FTC)
Dynamic Power
240 W (3 ohms, Front) 210 W (4 ohms, Front) 120 W (8 ohms, Front)
THD+N (Total Harmonic Distortion+Noise)
0.08% (20 Hz-20 kHz, half Power)
Input Sensitivity and Impedance
200 mV rms/47 k-ohms (Line) 3.5 mV rms/47 k-ohms (Phono MM)
Rated RCA Output Level and Impedance
1 V rms/470 ohms (Subwoofer pre-out) 200 mV rms/470 ohms (Zone 2/Zone B line-out)
Frequency Response
10 Hz-100 kHz/+1 dB, -3 dB (Direct/Pure Audio)
Tone Control
+/-10 dB, 20 Hz (Bass) +/-10 dB, 20 kHz (Treble)
Signal-to-Noise Ratio
106 dB (Line, IHF-A) 80 dB (Phono, IHF-A)
Speaker Impedance
4-16 ohms

TunerJump to...

FM
87.5 MHz-107.9 MHz
AM
530 kHz-1,710 kHz
FM/AM Preset Memory
40 stations

GeneralJump to...

Power Supply
AC 120 V-, 60 Hz
Power Consumption
Operating: 635 W Idle: 65 W Standby: 0.1 W
Dimensions (W x H x D)
17.12 x 6.8 x 14.94" (435 x 173.5 x 379.5mm)
Weight
21.7 lbs (9.8kg)
Weight
DimensionsN/AN/AN/AN/AN/AN/A
Additional information