| Content | The Tio1608-D is a Dante equipped I/O rack with 16 microphone/line inputs and 8 line outputs. The Tio1608-D preamplifiers can be remotely controlled from a TF series console. Connection from an on-stage Tio1608-D to a TF console at the mixing position only requires a CAT5e LAN cable for high-quality low-latency audio transfer.
No bulky, heavy multi-cables and connector boxes are required. What's more, basic patches are pre-programmed for fast, easy setup. Up to three Tio1608-D units can be connected simultaneously, providing a high-performance, high capacity stage box system with as many as 48 inputs and 24 outputs. The network connections can be daisy-chained when Tio1608-D units are used with a TF series console, eliminating the need for network switches.
Yamaha Tio1608-D Features
- Digital stagebox system with a maximum of 3 units
- Dante high reliability network audio protocol
- Fast and easy QUICK CONFIG Mode
- Simple and flexible input selection
- Recallable D-PRE preamplifiers
| Brand New Midas ProX with Neutron.
In person demos are available. Shipping cost is the buyers responsibility and will be determined by buyers location. Please message to discuss shipping. If purchased without a shipping agreement in place, the buyer will be responsible for local pickup.
The Midas PRO Series family moves up a gear with the PRO X control centre and the industry-changing NEUTRON Audio System Engine. Featuring 168 simultaneous input channels and 99 time-aligned and phase-coherent mix buses, the PRO X sets a new performance benchmark in high-profile live sound applications and is a truly impressive digital control surface for the engineer whose very livelihood depends on both unparalleled functionality and reliability. Like all PRO Series consoles, the PRO X features managed latency and 40 bit floating point processing precision.
HyperMAC and AES50 audio networking technologies allow the PRO X to dynamically assign up to 288 inputs and 294 outputs at 96 kHz sampling rate to any of its input channels and bus outputs on a scene-by-scene basis. This high level of connectivity, coupled with the large channel and bus counts, makes the PRO X equally at home in theatres and symphony halls as it is in live concert touring, outside broadcast and music festivals. | SSL UF8 Advanced DAW Controller
The SSL UF8 is an advanced DAW controller designed to fit the needs of DAW-based workflows and ultra-fast turn-around times. The SSL UF8 features 8, 100mm touch sensitive faders, 8 endless rotary encoders and 43 assignable keys. An expandable 8-channel advanced DAW controller, UF8 connects engineers, producers and artists directly to the creative process, offering absolute command of their workflow and significantly accelerating the speed of audio production and content creation.
Advanced Workflow
UF8 offers intuitive features that are developed from a true understanding of production workflow. Take ultimate control with simultaneous access to multiple DAW sessions, and precise navigation with a multi-purpose Master Encoder for DAW timeline access, track banking and mouse wheel emulation. 'Dual-purpose Selection Keys permit rapid access to select functions as well as solo and mute clearing in Pro Tools and Logic Pro. New CHANNEL and PLUG-IN control modes provide enhanced workflows for those using UF8 with Pro Tools, with easy access to sends and plug-ins without slowing down your creativity.
Configurability
Each UF8 comes equipped with 43 assignable user keys set across 5 configurable banks, allowing users to configure their essential keyboard shortcuts and macros for total session control. Add multiple controllers to create your unique mixing system; build your perfect 16-24 channel music creation hub, or connect 4 UF8’s within a single system to create a 32-channel controller ideal for large post production or mixing sessions. Multiple UF8s can be chained together using the THRU port and provide a safe place for iLok storage. For perfect positioning, each UF8 includes an adjustable stand allowing for six different angles of elevation for user defined placement. 19” rack mount kits are also available for installation into an ORIGIN console center section or other 19” studio racking.
360° Control
SSL’s new 360° software application provides fast configuration and admin control of your UF8. With an expanded system, ‘drag-n-drop’ configuration gives quick and dynamic access to each individual controller set up. Customise workflows and define up to 3 different DAW layers for simultaneous session control, with all changes managed without getting in the way of your productivity.
SSL UF8 Features:
- High-quality 100 mm touch sensitive faders
- High-resolution colour displays
- All metal enclosure, finished with a brushed, anodised top plate
- 8 Endless Rotary Encoders
- Custom Workflows with 43 assignable keys per UF8; 5 banks of 8 User Keys + 3 Quick Keys
- Intelligent Multi-Purpose CHANNEL Encoder
- Mouse Scroll Emulation; control of any plug-in parameter you hover the mouse over with absolute precision
- Integrates With All Major DAWs with workflow ready templates
- Pro Tools | Logic Pro | Cubase | Ableton Live | Studio One
- Hi-Speed USB connectivity
- Switch Control between 3 Simultaneously connected DAWs
- Bundled with SSL Native Vocalstrip 2 & Drumstrip plug-in
| If you're seeking to take your projects to a level on par with world-class analog consoles, the AMS Neve 8816 will lead you to new sonic frontiers and beyond. The 8816's handbuilt, handwired 16-channel mixer employs the same transformer-balanced mix bus circuitry as a '70s-era Neve 80-series console, infusing every signal that flows through it with increased headroom, punch, and dimensionality. The 8816 does more than mere analog summing, however. This feature-laden box also includes cue mixing, metering, per-channel solo/mute, and talkback functionality. Its capable monitoring section includes a volume knob, an auxiliary input, dual headphone outputs, and alternate speaker outputs. Beyond that, the 8816 includes a main stereo insert send/return for strapping a compressor, EQ, or other processing across your entire mix, while its unique Width knob gives you a level of control over your mix’s stereo field that’s generally reserved for top-level mastering facilities. Craving tactile, hands-on control over your mix? Add an 8804 Fader Pack (sold separately). The 8816 also includes a USB port for saving and recalling settings to and from your computer, plus a digital I/O option, which provides you with A/D conversion (option card sold separately).
Inject your projects with the unmistakable Neve sound
Vintage Neve 80-series consoles are simply legendary. Watch Dave Grohl’s Sound City documentary for definitive proof, or listen to any of the countless chart-topping recordings that were made with one. Elton John, Steely Dan, Nirvana, Pink Floyd, Dire Straits, George Clinton, Chick Corea, Grateful Dead, REO Speedwagon, Cheap Trick, Foreigner, Tom Petty and the Heartbreakers, Pat Benatar, Santana, Ratt, Rage Against the Machine, Tool, Slayer, Kings of Leon, Slipknot, Elvis Costello, Everclear, Mastodon, and many other artists were recorded or mixed on a Neve 80-series console. The AMS Neve 8816 contains genuine 80-series topology, boasting two custom Neve Marinair specification transformers on its stereo mix bus. Whether you use it for tracking and overdubbing, submixing and summing, or mastering, the 8816 will infuse your projects with the authoritative sound of a classic Neve console. All the sonic hallmarks are present: the heft, the muscle, the three-dimensional non-linearities — enabling you to add color and vibrancy to every project.
16 feature-packed channels of classic Neve character
The AMS Neve 8816 is centered around a feature-rich 16-channel analog mixer. Each channel boasts a line-level input with a rotary Level control, a rotary Pan control, a Cue button, and a Cut/Solo button. The Level knob, which accommodates both +4dBu and -10dBV sources, ranges from ∞dB to +15dB with 0dB set at approximately 12 o’clock. The Pan knob offers smooth, progressive operation with -3dB center attenuation. The Cue button sends the channel’s input, pre-fader, and pre-pan to the 8816’s cue mix. Channels 1–14 are individually switchable to the cue mix, while Channels 15–16 are stereo linked. At Sweetwater, we’ve found channels 15–16 incredibly useful for playback of a rough 2-track artist mix while overdubbing. The Cut/Solo button enables you to mute or solo a track. Since the 8816’s solo system is latching, you can also build solo groups, then use the master Cut/Solo button to audition or mute a group — a must-have feature when comping or sorting out EQ or balance problems.
A full-blown Neve console in a 2U rackmount format
The sheer number of the 8816's mix send/return options is enough to make your head spin, in a good way. Place a stereo compressor, EQ, or other processing across your entire mix, or create a parallel return for New York-style compression. Access high-end, mastering-studio-level stereo image enhancement with the Width control. Route the 8816’s 2-track return to its cue mix, or replace your headphone cue mix with the main monitor mix. The insert return and 2-track return feature independent level controls, providing you with near-endless customization. You can also put the 8816’s sends/return in Mid-Side mode. There’s even a hidden talkback mic that you can engage with a push of the 8816’s headphone level knob. With all of this complexity, you may be concerned that you’ll lose your settings. Don't worry: the 8816’s USB port allows for easy recall of your settings via control software on your Mac or PC. And if you need more inputs, you can cascade up to 32 units for up to 512 channels.
Comprehensive monitoring section
The AMS Neve 8816’s comprehensive monitoring section puts it at the very heart of your studio. You get four monitoring sources: the 8816’s 2-track return, channels 1/2 (pre-fader), its auxiliary input, and your main monitor mix. A Mon Level knob allows you to calibrate your mixing levels (we recommend aiming for 85dB), while a Mix Level knob controls the output level to your DAW. Main/alternate speaker outputs enable you to reference your mixes on a second set of studio monitors. The 8816’s dual headphone outputs are wired in parallel, one on the front panel and the other on the rear, where there are also balanced line outputs for feeding a separate headphone amp. You also get two quasi-PPM VU meters fed from the 8816’s main outputs, along with analog and digital clip indicator LEDs.
The legend continues
At Sweetwater, the name Neve commands reverence. Rupert Neve started designing audio equipment in the tube console era but made his mark with solid-state designs. Setting up shop in Little Shelford in the ’60s, Mr. Neve faced many obstacles establishing his brand amid a new technological landscape. Transistors were new, expensive, and difficult to obtain in quantity in the UK. Reliable faders didn’t exist yet — a far cry from today’s world, where parts are affordable and readily available from multiple suppliers, all competing to win bids. Nevertheless, Rupert persisted. And by the early 1970s, the Neve company was humming along, taking orders and building custom transformer-balanced consoles for recording and broadcast studios the world over.
Neve 80-series consoles had a huge, punchy, and authoritative sound that defined the sound of ’70s rock. From London to New York to Los Angeles and beyond, top studios were installing Neve desks as fast as they could. By 1978, with the introduction of the majestic 8078 — the pinnacle of handwired analog “production” consoles — and NECAM automation system, Neve boards were the main component of the success formula for any recording studio with world-class aspirations. In the decades since, AMS Neve has innovated with groundbreaking products such as the VR, VX, and 88R series consoles. And today, the company continues to advance the state of the art with cutting-edge pro audio gear that sounds incredible and intelligently addresses the challenges of the digital age.
AMS Neve 8816 Summing Mixer Features:
- Packs the sound and functionality of a Neve console into a 2U rackmount unit
- Contains genuine Neve 80-series topology, including 2 custom Marinair transformers
- Ideal for tracking, overdubbing, submixing, summing, and mastering alike
- 16 channels of analog summing add color and vibrancy to every project
- Each channel boasts rotary Level and Pan controls, plus Cue and Cut/Solo buttons
- Mix insert points for adding effects to individual channels
- Comprehensive cue mixing for creating custom-tailored headphone mixes
- Main stereo insert send/return for adding processing to your mix bus
- Width knob supplies high-end-mastering-studio-level stereo image enhancement
- Main/alternate speaker outputs enable referencing on a second set of studio monitors
- 2-track return, auxiliary input, and dual headphone outputs
- Sends/returns boast a Mid-Side mode for added flexibility
- Hidden talkback mic is engaged with a push of the headphone level knob
- 2 quasi-PPM VU meters for the main outputs, plus analog and digital clip indicator LEDs
- USB port allows for recall of your settings via control software on your Mac or PC
- Cascade up to 32 units for up to 512 channels
- 8804 Fader Pack gives you tactile, hands-on control over your mix (sold separately)
- Digital I/O option provides A/D conversion (option card sold separately)
| BEHRINGER X32 RACK " Rack Mixer
- 32 Channels
- 16 XLR Mic/Line inputs
- 8 Stereo FX returns
- 25 Buses
- 6 Matrix buses with insert
- 6 Mute groups
- 8 DCA groups
- 8 XLR outputs
- 6 AUX inputs via 6.3 mm jack (optional: 2 via RCA)
- 6 AUX outputs via 6.3 mm jack (optional: 2 via RCA)
- Adjustable headphone jack
- 32 x 32 USB audio interface
- Talkback microphone input (XLR)
- 4-Band fully parametric EQ on each channel
- Adjustable delays on all channels
- Virtual effects rack with 8 FX slots
- Built-in stereo USB recorder
- Remote control via Ethernet
- 5" TFT display
- Compatible with the Behringer P-16 personal monitoring system
- Format: 19" / 3U
- Dimensions: 132 x 483 x 287 mm
- Weight: 6.5 kg
| Espandibile fino a 32 canali - QCon Pro XS8 + 1 fader motorizzati sensibili al tocco con risoluzione a 10 bitFader LED a 12 segmentiDoppio display LCD retroilluminato 2 × 56 per visualizzare il nome del canale. i valori di controllo. ecc. Per ogni canaleDisplay LED a 12 segmenti che mostra la posizione temporale del progetto in formato SMPTE o BBT - 18 pulsanti assegnabiliRotella jog shuttle per ricerca e controllo velociPulsanti illuminati per ogni canale. inclusi Record Enable. Solo. Mute. Select e Monitor6 pulsanti illuminati tra cui Play. Stop. Rec. Rewind. Fast Forward e LoopPulsante ZOOM illuminato con 4 pulsanti di direzione9 pulsanti funzione MIDI assegnabili illuminatiEspandibile a 32 canali utilizzando 3 unità di espansione QCon XSDue (2) connettori da 1/4 per interruttori a pedale e pedaliClasse compatibile con Windows XP. Vista (32 bit). Windows 7 (32 bit e 64 bit). Windows 8 (32 bit e 64 bit). Windows 10 (32 bit e 64 bit) e Mac OS XConnettività USB 2.0 ad alta velocitàIl driver ICON Quick-Setup è disponibile per Cubase. Nuendo. Reason e Bitwig per la compatibilità plug & play istantaneaBitwig Studio 8-Track DAW è incluso.Mackie Control integrato per tutte le DAW elencate (ad eccezione di ProTools che utilizza il protocollo Mackie HUI)Facile aggiornamento del firmware disponibile tramite connessione USB e software iMapQualità costruttiva superiore e robusto involucro in metallo con porta per blocco Kensington
Dimensioni: Lunghezza 51cm - Profondità 23.5cm - Altezza 57.5cm - Volume 0.068m³
Icon # Qcon Pro X - controller per DAW # Controller Midi / Controller Midi USB # Serie Qcon |
Reviews
There are no reviews yet.