| Content | Power supply not included - requires IEC cable.
The UltraStudio 4K Extreme 3 lets you connect Thunderbolt 3 computers to any video equipment. Connect to the Thunderbolt 3 port for video and audio connections compatible with SD, HD, Ultra HD, and 4K DCI formats up to 60 frames per second. Use the UltraStudio 4K Extreme 3 to build high performance edit workstations, archive from old broadcast decks, output broadcast graphics, and live stream.
Connect and work with the equipment of your choice. SDI in and out, HDMI out, and balanced analog input provide high quality connections to just about any equipment you could want to work with. An extra HDMI input and balanced analog audio out connect for in-studio audio monitoring use. Larger design than the Mini UltraStudios lets the UltraStudio 4 Extreme fit 4 channel analog audio via XLR connections, 2 channels of AES/EBU digital audio, and dedicated timecode connections. Video reference for sync playback to broadcast systems and RS-422 remote are included. The UltraStudio 4K Extreme 3 can feed SDI fill and key from RGB graphics from your computer to a live production switcher for high quality live broadcast graphics keying.
12G-SDI technology brings the most powerful video capture and playback solution at high speeds. Speed supports work of Ultra HD and 4K 60p over one BNC cable. Multi rate 12G-SDI connections provide greater compatibility, working with existing SD and HD equipment and newer Ultra HD formats up to 2160p60.
With the UltraStudio 4K Extreme 3, you’re not locked into a single format. Popular compressed video formats and 10-bit uncompressed video are both supported. Images in uncompressed video are a perfect pixel-for-pixel clone of the source without any loss of quality.
Thunderbolt 3™ technology ensures the UltraStudio 4K Extreme 3 is a power-driven solution. Low latency and highly accurate time synchronization provide the highest possible quality capture and playback. UltraStudio 4K Extreme 3 uses a fast one cable connection to a computer with the bandwidth to easily handle high resolution video formats. Powered by the Thunderbolt connection, the UltraStudio 4K Extreme 3 can run from a laptop battery without needing a power connection. An AC power connection is also included.
Front panel has fast control buttons and integrated color LCD. Back panel uses industry standard BNC and HDMI connectors. Enjoy broadcast and digital cinema quality capture and playback in any workflow.
Blackmagic Design UltraStudio 4K Extreme 3 Features
- Connect Thunderbolt 3 computers to video equipment
- Compatible with SD, HD, Ultra HD, and 4K DCI formats up to 60 frames per second
- Designed to work with popular video editing software on Mac, Windows, and Linux systems
- Video reference for sync playback to broadcast systems
- RS-422 remote
- Support for compressed and uncompressed formats
- Low latency and accurate time synchronization in Thunderbolt 3 technology
- Easily portable
- Stand alone on desktop or rack mount
- Broadcast and digital cinema quality capture and playback
| The World's Most Complete Sports Production System
Engineered with a purpose and built with a commitment to ensuring you have everything you need for professional sports production, NewTek 3Play 3P1 is the premier video solution for live game coverage, replay, training, and analysis, with the most complete set of real-time capabilities for modern sports production ever integrated into a single turnkey system, including native IP workflow integration and telestration.
NewTek 3Play 3P1 integrates seamlessly with NewTek IP Series, TriCaster TC1, and NVG1 NewTek-Vizrt IP Graphics Server. This gives sports producers or anyone needing replay capability the power to utilize any NDI source on the network for recording and replay, and conversely SDI sources connected to 3Play 3P1 are available as NDI sources anywhere. An equally significant option is LivePanel for 3Play 3P1, which give users control of 3Play 3P1 from any web browser, on any device, using any OS.
For both live sports and esports, delivering world-class replay, network-style presentation, and a phenomenal fan experience has never been easier or more affordable. 3Play 3P1 is truly replay redefined.
Product Highlights:
Engineered for the most demanding broadcast and media environments, 3Play 3P1 provides a winning combination of innovative technology and seamless workflow integration to power forward-thinking fan experiences that span from stadiums to screens to smartphones.
- Fully integrated sports production in resolutions up to 1080p 60
- SDI, hybrid, and end-to-end IP connectivity to adapt to your game plan
- Native software-driven processing for maximum production power and flexibility
- Integrated NDI® Telestrator Pro for live telestration from any compatible connected device, with support for remote video transport control
- Comprehensive camera coverage and delivery with support for 4 simultaneous external inputs and 2 outputs
- Synchronized continuous capture to full-resolution QuickTime® files for instant replay, live editing, post-production, and archive
- Versatile audio connectivity and capture, with support for digital, analog, and network audio, plus 8 channels of audio recording per input
- Multi-purpose video server with full frame-rate, multi-angle preview windows • Real-time social media sharing to Facebook, Twitter, YouTube, and more
- Custom playlist building and highlights packaging for live insert, export, or VOD
- Intuitive asset management and tagging system for metadata entry, navigation, organization, and content retrieval
- Powerful production automation with custom macro commands, cross-platform workflow integration, and flexible control options
- Enhanced creative capabilities, including real-time layering, motion graphics, animated transitions, and more
- Industry-standard 2RU system chassis with included hardware control panel
3Play 3P1 Control Panel Included
Run every sports production with the confidence of a team captain. With a professional hardware panel included, 3Play 3P1 brings blazing speed and airtight control to the operator’s chair so you can read, react, and replay in record time.
NDI® Telestrator Pro
Enlighten and entertain audiences, enhancing play-by-play and analysis with live telestration— right from the first replay. With NDI® Telestrator Pro included with 3Play 3P1, you can annotate on screen and roll immediate replays over the network from any compatible networked device— with only a single Ethernet cable required.
NDI® Telestrator Pro supports telestration over either or both 3Play 3P1 output channels, offers a variety of professional paint tools, shapes, and customizable graphics, and includes responsive transport controls for remote playback. (External PC or touchscreen device with Microsoft® Windows 7 operating system (OS) or better required.)
System Specifications
Video Input: 4 x simultaneous external video inputs, supporting any combination of compatible sources
Network Video Input: 4 x resolution-independent IP video inputs via NDI®
SDI Video Input 4 x 3G/HD/SD-SDI connections supporting video input in any combination of standard formats, resolutions, and frame rates
- 1080p: 59.94, 50, 29.97, 25, 24, 23.976
- 1080i: 59.94, 50
- 720p: 59.94, 50, 29.97, 25, 24, 23.976
- 576i 50
- 480i 59.94
Video Output: 2 x session-format video outputs, with simultaneous delivery via IP and SDI
Network Video Output: 2 x session-format IP video outputs via NDI®
SDI Video Output: 4 x 3G/HD/SD-SDI connections supporting redundant delivery of 2x session-format video outputs
Multiviewer Output
- 1 x DVI user interface with multiviewer
- 1 x HDMI multiviewer
- 1 x DisplayPort multiviewer
Recording: 4 x simultaneous recording channels
Recording Format: QuickTime® (XDCAM HD compatible, 4:2:2 encoding, 24-bit audio, with timecode) 1QuickTime Player not required for playback in common NLE applications
Storage: 3 x 3TB internal drive (capacity varies by format, resolution and file specification)
Grab: Grab full-resolution, deinterlaced still images from inputs and outputs
Export: Export video and image files to social media, FTP, local or external volumes, and network servers, with optional transcoding
DSK: 1 x DSK channel per output, with independent source selection and transition
Transitions: Supports custom transitions between output channels and playlist clips
Telestration: Integrated NDI® Telestrator Pro technology supporting real-time telestration and transport control from compatible devices over the network
Asset Management: Asset management system supporting metadata entry, tagging, filtering, organization, navigation, bookmarking, and integration with compatible MAM platforms
Local Audio Input
- 4 x SDI embedded
- 1 x Balanced XLR stereo pair (Line)
- 3 x Balanced 1/4” stereo pairs (Line)
Local Audio Output
- 4 x SDI embedded
- 1 x Balanced XLR stereo pair
- 1 x Balanced 1/4” stereo pair
- 1 x Stereo 1/4" (phones)
Network Audio: Native support for network audio input and output via NDI®
Processing
- Video: Floating Point YCbCr +A 4:4:4:4
- Audio: Floating Point, 96 kHz
Throughput Latency: ~1.0-1.5 frames
A/V Standards
- 3G-SDI video conforms to SMPTE 424M (Level A)
- HD-SDI video conforms to SMPTE 292M
- SD video conforms to SMPTE 259M and ITU-R BT.656
- Analog audio levels conform to SMPTE RP-155
Genlock: Genlock input supporting SD (Bi-level) or HD (Tri-level) reference signals
Macros: Record, store, edit, and automate commands and user-configured operation sequences, including support for cross-platform automation between supported systems
AMP: Supports Advanced Media Protocol for remote control via compatible third-party production systems
GPI: Supports GPI signals via JLCooper Electronics eBox GPI interface
MIDI: Support for standard MIDI protocol enabling third-party device control
System Drive: 120GB SSD
NIC: 2 x 1 Gigabit NIC
System Physical 2RU chassis with 400W PSU and multi-tiered hardware and software fail-safe
- 19.0 x 3.5 x 19.57 in (48.3 x 8.9 x 49.7 cm) with rack ears attached
- ~26 lbs (~12 kg)
| Matrox Monarch LCS Encoder Appliance | Power supply not included - requires IEC cable.
Smart Videohub 40x40 offers a revolutionary routing process. Mixed format router has built-in video monitoring and spin knob router control. The largest of the standard Smart Videohub series, it is still compact at a two rack unit size.
You get an extremely convenient routing process with visual routing. Router connections are shown as video on the LCD screen while you spin the knob to select your routing. Built-in monitor also displays crosspoint connection labels and TV formats. Visual routing makes the routing process faster than ever.
Monitor all the live video connected to the Smart Videohub 40x40 from the LCD screen. LCD supports video in nearly all TV formats, eliminating the need for a separate external monitor. Monitoring from the Videohub is helpful to confirm the correct video inputs are being sent to the correct video outputs.
6G-SDI connections work with standard frame rate Ultra HD video while keeping full compatibility with SD and HD-SDI equipment. You get the quality of SDI video connections with the flexibility to work in any television format, and 4:2:2 or 4:4:4 color sampling.
Multi format technology supports connecting compatible equipment to the router simultaneously. Seamlessly work in NTSC and PAL SD, 720, 1080HD, even 2160 Ultra HD at any frame rate and the router switches standards so inputs match.
Free software developer kit gives you the power to create your own custom router control. The included external software control lets you control the router via network on Mac and Windows. Hardware control panels are available with the Videohub Smart Control Pro and Videohub Master Control Pro (both sold separately). RS-422 protocol can also be used to control Videohub for router crosspoint switching.
Blackmagic Design Smart Videohub 40x40 Features
- 6G-SDI technology
- 40 inputs
- 40 outputs
- Spin knob control
- Work with SD, HD and Ultra HD formats simultaneously
- Visual routing
- Built-in LCD
- Ideal for large systems and OB van use
| The VR-50HD MK II Multi-Format AV Mixer is the next evolution of Roland’s industry-leading, all-in-one AV switcher with USB 3.0 streaming. Easily operated by a single person, the VR-50HD MK II continues to deliver best-in-class connectivity and flexibility, allowing you to work a wide range of events with different I/O requirements.
The powerful VR-50HD MK II is a completely self-contained AV solution, consolidating video switching, digital audio mixing, multi-viewer touchscreen control, and USB AV streaming into a single unit that’s simple to run. And with the comprehensive rear patch panel, it’s quick and easy to make on-the-fly input assignments to cross-points on the switcher.
With the VR-50HD MK II, you can send any of the connected input devices to a dedicated Aux output without affecting the main PGM destination. Use the Aux assignment panel buttons to switch the source, or synchronize the Aux output with the PGM (mixer) output to act as a built-in distribution amp. Drilling down into menus while switching is a thing of the past, thanks to dedicated broadcast-style buttons for Aux, PinP, and Still sources. Select, Solo, and Mute buttons are included for all audio channels, speeding up the monitoring process. And with the large touchscreen multi-view monitor, you can view and assign inputs, display up to four still images, execute preview/program functions, and much more.
Offering a number of automation functions the VR-50HD MK II allows a single operator to switch video and mix pro-level audio at the same time. Use Auto Mixing to balance audio levels, Video Follows Audio to switch cameras based on sound input, and Anti-Feedback to automatically tame howling mic feedback. Adaptive noise reduction helps with noise canceling and hum suppression. The VR-50HD MK II is also equipped with a variety of standard audio production inputs, including four XLR/TRS combo jacks with 48 V phantom power, four stereo pairs (two ¼-inch and two RCA), and embedded audio from 3G/HD/SD-SDI and HDMI.
Built-in support can directly control select JVC, Panasonic, Sony, PTZOptics, Avonic and VISCA compatible PTZ LAN cameras. Up to six PTZ cameras can be operated at once via the LAN port. Use the same technology as webcams to reach worldwide audiences by plugging into a computer via USB 3.0 and using a streaming service that's able to use a webcam as its source.
Roland VR-50HD MK II Features
- Aux output for dedicated record, streaming, or confidence monitor feeds
- Updated user interface for fast, trouble-free operation
- High-quality audio preamps and converters for crystal-clear sound
- Direct control of select PTZ cameras from JVC, Panasonic, Sony, PTZOptics, Avonic and VISCA compatible over LAN
- Automatic audio mixing, adaptive noise reduction and automatic video switching functions to support single operators
- All-in-one convenience and ultra-flexible connectivity
- Four-layer composition and still store
| Designed for broadcasters and AV professionals, the ATEM Television Studio series can turn any live event into a professional HD or Ultra HD program. Switching between multiple cameras, game consoles, and computers happens in real time with broadcast quality support so changing sources won’t cause glitching. The ATEM Television Studio Pro 4K is a great switching solution for sporting events, concerts, seminars, video gaming competitions, episodic television, and more.
Streamline your workflow to handle more complex and faster paced productions with the ATEM Television Studio Pro 4K. The ideal combination of a professional control panel and switcher, it is faster to switch sources, add effects, efficiently manage and color grade remote cameras, mix audio, and key graphics.The ATEM Television Studio Pro 4K has all the features of the other models, adding Ultra HD capability and more SDI inputs. Eight independent 12G-SDI inputs support popular HD and Ultra HD formats up to 2160p60 automatically re-sync to the switcher.
Connect up to 8 cameras, game consoles, computers, or other sources from the 8 independent video inputs. Output sources include professional SDI program and aux outputs, with SDI and HDMI outputs supporting multiview monitoring. The ATEM Television Studio Pro 4K supports multiview in Ultra HD.
Broadcast quality transitions give you creative freedom throughout your live production. Choose and instantly apply transitions among mixes, wipes, dips, DVE, and more. Customize duration of transitions and add visual effects to the transitions with borders. The built in DVE powers adjustments to position, size, and scale of live video in real time.
ATEM advanced chroma keyer provides greater color control with clean green screen keying in real time for seamless multi-layer creations.
Talkback can be enabled to send audio to and from the camera. A professional audio mixer also gives the switcher the essential functions for mixing audio.
Blackmagic Design ATEM Television Studio Pro Features
- 8 12G-SDI inputs for popular HD and Ultra HD sources up to 2160p60
- Connected video sources re-sync to the switcher
- Multiview monitoring
- Power supply not included - requires IEC cable
- Broadcast quality transitions
- Built in 2D DVE
- ATEM advanced chroma key
- Talkback
- Audio mixer capabilities
- Software control panel for Mac or Windows included
|
Reviews
There are no reviews yet.