| Content | Power supply not included - requires IEC cable.
The UltraStudio 4K Extreme 3 lets you connect Thunderbolt 3 computers to any video equipment. Connect to the Thunderbolt 3 port for video and audio connections compatible with SD, HD, Ultra HD, and 4K DCI formats up to 60 frames per second. Use the UltraStudio 4K Extreme 3 to build high performance edit workstations, archive from old broadcast decks, output broadcast graphics, and live stream.
Connect and work with the equipment of your choice. SDI in and out, HDMI out, and balanced analog input provide high quality connections to just about any equipment you could want to work with. An extra HDMI input and balanced analog audio out connect for in-studio audio monitoring use. Larger design than the Mini UltraStudios lets the UltraStudio 4 Extreme fit 4 channel analog audio via XLR connections, 2 channels of AES/EBU digital audio, and dedicated timecode connections. Video reference for sync playback to broadcast systems and RS-422 remote are included. The UltraStudio 4K Extreme 3 can feed SDI fill and key from RGB graphics from your computer to a live production switcher for high quality live broadcast graphics keying.
12G-SDI technology brings the most powerful video capture and playback solution at high speeds. Speed supports work of Ultra HD and 4K 60p over one BNC cable. Multi rate 12G-SDI connections provide greater compatibility, working with existing SD and HD equipment and newer Ultra HD formats up to 2160p60.
With the UltraStudio 4K Extreme 3, you’re not locked into a single format. Popular compressed video formats and 10-bit uncompressed video are both supported. Images in uncompressed video are a perfect pixel-for-pixel clone of the source without any loss of quality.
Thunderbolt 3™ technology ensures the UltraStudio 4K Extreme 3 is a power-driven solution. Low latency and highly accurate time synchronization provide the highest possible quality capture and playback. UltraStudio 4K Extreme 3 uses a fast one cable connection to a computer with the bandwidth to easily handle high resolution video formats. Powered by the Thunderbolt connection, the UltraStudio 4K Extreme 3 can run from a laptop battery without needing a power connection. An AC power connection is also included.
Front panel has fast control buttons and integrated color LCD. Back panel uses industry standard BNC and HDMI connectors. Enjoy broadcast and digital cinema quality capture and playback in any workflow.
Blackmagic Design UltraStudio 4K Extreme 3 Features
- Connect Thunderbolt 3 computers to video equipment
- Compatible with SD, HD, Ultra HD, and 4K DCI formats up to 60 frames per second
- Designed to work with popular video editing software on Mac, Windows, and Linux systems
- Video reference for sync playback to broadcast systems
- RS-422 remote
- Support for compressed and uncompressed formats
- Low latency and accurate time synchronization in Thunderbolt 3 technology
- Easily portable
- Stand alone on desktop or rack mount
- Broadcast and digital cinema quality capture and playback
| The NOVAPRO HD is an advanced high performance LED display controller, video processor, and configuration device that supports multiple signal formats including DP / HDMI / VGA / DVI / CVBS / 3G-SDI, up to 1080p @60Hz input resolution, 165MHz pixel clock and 4G-Bit output bandwidths. NOVAPRO HD also includes DMX512 and GenLock interfaces, Ethernet ports for communication through standard TC/IP and USB control for cascading with additional NOVAPRO HD's. NOVAPRO HD is compatible with all of ADJ's current video products.
Controller Features
- No Computer or External Scaler Needed (standard rectangular layouts only)
- Up to 1080p @60Hz Input Resolution
- 165Mhz Pixel Clock / 4G-Bit Output Bandwidth
- Multiple Video Signal Format Support
- Cascade Multiple Units Together
- Rack Mountable Aluminum Enclosure (screws not included)
Controller Specs
CONTROL / CONNECTIONS
- (1) Input and (4) Output RJ45 EtherCON Ports
- USB, 5pin DMX, and GenLock In/Out Ports
- Audio Input: 1/8 inch connector
- Video Input: DP / HDMI / VGA / DVI / CVBS / 3G-SDI
- Locking IEC Power Input
SIZE / WEIGHT
- Length: 19.0" (483mm)
- Width: 15.3" (389mm)
- Height: 3.5" (88.2mm)
- Weight: 13.2 lbs. (6.0kg)
ELECTRICAL
- AC 85-265V - 50/60Hz - 0.65A
- Max Power Consumption: 30W
| Use the Blackmagic Design ATEM production switcher series to create stunning multi camera live production. ATEM switches between SD, HD, or Ultra HD video standards so your live production can use cameras, disk records, slide shows from computers, and more video sources. Features include chroma key, creative transitions, media pool, downstream keyers, audio mixer, multi view, and more. ATEM live production switchers support live production needs at live concerts, sporting events, theater productions, conferences, and more. The ATEM advanced panel is added to an ATEM switcher as a control panel.
Although each switcher includes ATEM software control panel for Mac or Windows, an ATEM Advanced Panel is faster to use, making it ideal for demanding live production environments. Setup more complex effects with the enormous amount of control you’ll have in the ATEM 4 M/E. The ATEM 4 M/E Advanced Panel features broadcast buttons, knobs, and a t-bar fader.
The ATEM 4 M/E has four M/E rows with 40 input buttons and four independent system control LCDs for reach row. All input buttons have customizable colors and button label LCDs.
Modern design with the latest broadcast technology combine to enable faster workflows. Built in LCD control screen identifies work processes. Buttons are curved and have color backlighting to reduce incorrect key presses and quickly identify the keys you need. Professional joystick controls DVE and camera adjustments, smooth weighted t-bar fader, and more.
Durable and compact, the ATEM 4 M/E fits in a standard equipment rack. It can be used seamlessly for shelf mounting in broadcast trucks, mobile racks, and fly away kits.
Blackmagic Design ATEM 4 M/E Features
- Add to an ATEM switcher for accessible control panel functions
- Faster workflow
- Four independent rows of control, each with 40 input buttons
- Backlit buttons make identification easy and lower incorrect key presses
- Joystick for DVE and camera adjustments
- Smooth weighted t-bar fader
| The VR-50HD MK II Multi-Format AV Mixer is the next evolution of Roland’s industry-leading, all-in-one AV switcher with USB 3.0 streaming. Easily operated by a single person, the VR-50HD MK II continues to deliver best-in-class connectivity and flexibility, allowing you to work a wide range of events with different I/O requirements.
The powerful VR-50HD MK II is a completely self-contained AV solution, consolidating video switching, digital audio mixing, multi-viewer touchscreen control, and USB AV streaming into a single unit that’s simple to run. And with the comprehensive rear patch panel, it’s quick and easy to make on-the-fly input assignments to cross-points on the switcher.
With the VR-50HD MK II, you can send any of the connected input devices to a dedicated Aux output without affecting the main PGM destination. Use the Aux assignment panel buttons to switch the source, or synchronize the Aux output with the PGM (mixer) output to act as a built-in distribution amp. Drilling down into menus while switching is a thing of the past, thanks to dedicated broadcast-style buttons for Aux, PinP, and Still sources. Select, Solo, and Mute buttons are included for all audio channels, speeding up the monitoring process. And with the large touchscreen multi-view monitor, you can view and assign inputs, display up to four still images, execute preview/program functions, and much more.
Offering a number of automation functions the VR-50HD MK II allows a single operator to switch video and mix pro-level audio at the same time. Use Auto Mixing to balance audio levels, Video Follows Audio to switch cameras based on sound input, and Anti-Feedback to automatically tame howling mic feedback. Adaptive noise reduction helps with noise canceling and hum suppression. The VR-50HD MK II is also equipped with a variety of standard audio production inputs, including four XLR/TRS combo jacks with 48 V phantom power, four stereo pairs (two ¼-inch and two RCA), and embedded audio from 3G/HD/SD-SDI and HDMI.
Built-in support can directly control select JVC, Panasonic, Sony, PTZOptics, Avonic and VISCA compatible PTZ LAN cameras. Up to six PTZ cameras can be operated at once via the LAN port. Use the same technology as webcams to reach worldwide audiences by plugging into a computer via USB 3.0 and using a streaming service that's able to use a webcam as its source.
Roland VR-50HD MK II Features
- Aux output for dedicated record, streaming, or confidence monitor feeds
- Updated user interface for fast, trouble-free operation
- High-quality audio preamps and converters for crystal-clear sound
- Direct control of select PTZ cameras from JVC, Panasonic, Sony, PTZOptics, Avonic and VISCA compatible over LAN
- Automatic audio mixing, adaptive noise reduction and automatic video switching functions to support single operators
- All-in-one convenience and ultra-flexible connectivity
- Four-layer composition and still store
| HyperDeck Extreme 8K HDR has the reliable features of HyperDeck, with new features of space-saving H.265 files, optional internal cache, 3D LUTs, native 8K and HDR support. Ability to record native 8K in H.265 storage reduces storage costs and image quality stays amazing. Large touch screen ensures you can see your recording and easily control all deck settings. HyperDeck Extreme 8K HDR is an excellent solution for broadcast, live production, and digital signage.
Great for live production as a master recorder, clip player and for recording ISO cameras. Analog inputs allow recording from old video tapes, so legacy programming is compatible with the latest streaming services and can be edited. 10G Ethernet makes digital signage easy with fast media uploads, and a simple remote control protocol. Use as a field recorder with HDMI, SDI and analog inputs with built in scopes and 3D LUTs.
AC and DC power connections help make sure you can use the HyperDeck Extreme 8K HDR in studio or on location. Record to commonly available flash memory cards with dual CFast media support.
The HyperDeck Extreme 8K HDR includes two media slots, Quad 12G-SDI for 8K, analog connections for archiving, USB-C external disk recording, front panel speaker and headphone jack. Install a PCIe flash disk as a record cache to eliminate dropped frames when your media becomes full or is too slow. Record and playback in full resolution 8K is possible with the included Quad Link 12G-SDI. SDI connections are multi-rate, so you can use with other 8K products, or switch to SD, HD or Ultra HD.
Touch LCD screen provides incredible control with dedicated buttons for play, stop, record, a timeline for scrolling through recordings, image swipe to jog, and more. Heads up display on the LCD shows timecode, video standard, media status, and audio meters. Enable scopes, load and save 3D LUTs, and remote control the HyperDeck from the touch screen.
Full internal waveform monitoring ensures compliance with broadcast standards. RGB and YUV parade displays are ideal for color correction and checking for illegal levels. Histogram shows distribution of white to black detail, and highlights or shadows clipping.
Blackmagic Design HyperDeck Extreme 8K Features
- Power supply not included - requires IEC cable
- Modern design with traditional controls
- Rack mountable
- Live production, digital signage and archive
- Dual CFast media for nonstop recording
- Record direct to external USB-C media disks
- Compatible with controllers, switchers, converters, and more
- Advanced HDR support and bright wide gamut LCD
- Built in scopes ensure compliance with broadcast standards
- Professional audio with multi channel SDI and analog audio
- Localized for 11 common languages
| Power supply not included - requires IEC cable.
Smart Videohub 40x40 offers a revolutionary routing process. Mixed format router has built-in video monitoring and spin knob router control. The largest of the standard Smart Videohub series, it is still compact at a two rack unit size.
You get an extremely convenient routing process with visual routing. Router connections are shown as video on the LCD screen while you spin the knob to select your routing. Built-in monitor also displays crosspoint connection labels and TV formats. Visual routing makes the routing process faster than ever.
Monitor all the live video connected to the Smart Videohub 40x40 from the LCD screen. LCD supports video in nearly all TV formats, eliminating the need for a separate external monitor. Monitoring from the Videohub is helpful to confirm the correct video inputs are being sent to the correct video outputs.
6G-SDI connections work with standard frame rate Ultra HD video while keeping full compatibility with SD and HD-SDI equipment. You get the quality of SDI video connections with the flexibility to work in any television format, and 4:2:2 or 4:4:4 color sampling.
Multi format technology supports connecting compatible equipment to the router simultaneously. Seamlessly work in NTSC and PAL SD, 720, 1080HD, even 2160 Ultra HD at any frame rate and the router switches standards so inputs match.
Free software developer kit gives you the power to create your own custom router control. The included external software control lets you control the router via network on Mac and Windows. Hardware control panels are available with the Videohub Smart Control Pro and Videohub Master Control Pro (both sold separately). RS-422 protocol can also be used to control Videohub for router crosspoint switching.
Blackmagic Design Smart Videohub 40x40 Features
- 6G-SDI technology
- 40 inputs
- 40 outputs
- Spin knob control
- Work with SD, HD and Ultra HD formats simultaneously
- Visual routing
- Built-in LCD
- Ideal for large systems and OB van use
|
Reviews
There are no reviews yet.