| Content |
Integrated Stereo Amplifier
Versatile pre-main amp refreshes your music life
Onkyo builds on the success of its A-9010 pre-main amp with the new A-9110 Integrated Stereo Amplifier, a component that refines an original amp design that's won an excellent critical and commercial reputation for dynamic, musical sound. Lively dynamics, deep bass, and layered detail emerge from warm and expressive tuning sure to please European ears.
WRAT delivers high-current power stability via large custom capacitors, while low-NFB amps capture the depth and spatiality of analog and hi-res recordings. Five RCA inputs including MM phono stage connect your sources while high-quality speaker-posts reveal Onkyo's hi-fi heritage and careful attention to detail. The A-9110 invites you into each album, the hours passing comfortably in pure analog sound.
Stable high-current power with wide-range amplifiers
Dynamic changes in music cause impedance to fluctuate. If power can't be delivered when impedance drops, sound quality suffers. Onkyo's solution is WRAT, specifically its high-output EI transformer, huge custom-made main audio capacitors, and carefully selected high-quality parts. High-current stability controls the speaker-drivers for accurate and assured reproduction of dynamic musical passages.
Further, the A-9110 features Onkyo's time-proven low-negative-feedback amplifier topology that distinguishes the timbral warmth, fullness, and vibrancy of the recording. This circuitry captures a wide frequency spectrum with uncommonly low distortion.
Sounds clearer at low volumes
When playing music at low volume, the signal normally drops close to the component's noise floor. The signal picks up noise, which is amplified, and the result is muffled sound.
To avoid this, the A-9110 features Optimum Gain Volume Circuitry, a volume circuit that requires less than half the usual amount of attenuation. The signal never approaches the noise floor, so you can enjoy clearest sound at low volume.
Phase Matching Bass Boost enriches sound at low volume
Most pre-main amps have a loudness button designed to boost low-mid frequency sound. However, conventional designs are prone to phase-shift, which degrades the clarity of the vocal frequency band.
Onkyo's Phase Matching Bass Boost function eliminates phase-shift between low- and mid-range frequency bands above 300 Hz.
Bass response is enhanced without compromising vocal clarity, and that's something especially useful when playing music at low volume where bass and high-frequency sounds are more difficult to hear.
Thick and rigid chassis tames resonance
Every hi-fi component generates electromechanical resonance. This translates into signal noise, and that impacts on the sound coming out of your speakers. To combat the negative effects of vibration, the A-9110 features a rigid metal chassis that's 1.3 times thicker than the A-9010 at 1.6 mm. Working together with large, wide-spaced insulators, unwanted resonance is virtually eliminated.
Direct Mode brings you closer to the source
Direct Mode bypasses tone and PM Bass circuitries. In combination with a refined amp circuit design, signal-path-lengths have been significantly reduced in comparison to the A-9010 for even more accurate and faithful sound.
Enjoy end-to-end analog music reproduction from turntable to speakers, and recapture the atmosphere of the original recording with any connected source.
New fine display shares info clearly
A new display panel boasts fine text resolution, making it easier to read at a distance than single bulbs. It shows active selected input at a glance.
Quality speaker-posts make perfect contact
Speaker cables with your choice of terminal are firmly secured by high-quality speaker binding posts. Each wide-spaced non-magnetic post prevents interference and features a large, easy-to-grip transparent knob.
- A-9110 Features:
- 50 W + 50 W high-current amplification
- WRAT (Wide Range Amplification Technology)
- Direct Mode for source-authentic audio reproduction
- Phase Matching Bass Boost
- High-current EI transformer, large custom audio capacitors, and discrete output stage
- New fine display for easy source selection
- Amplification Features:
- 50 W + 50 W (4 Ohm, 20 Hz-20 kHz, 0.9% THD, 2-ch driven, IEC)
- Optimum Gain Volume Circuitry for clear low-volume playback
- 4 Ohm speaker-driving capability
- Rigid anti-resonant 1.6 mm metal chassis
- Direct Mode for source-authentic audio reproduction
- Connection Features:
- 4x Analog RCA inputs
- 1x Phono input with discrete MM phono equalizer
- 1x Analog RCA line-level output
- Subwoofer pre-out
- Non-magnetic speaker posts with clear knobs
- 6.35 mm headphone jack
- RI (Remote Interactive) input
- Additional Features:
- Fine display shows active input
- Independent tone controls for bass and treble with balance control
- Easy-to-use controls for smooth operation without a remote
- RI (Remote Interactive) input enables connection of a supported component for integrated control with one remote controller
- Auto Power Standby
- Number of Channels
- 2
- Power Rating
- 50 W per channel @ 4 Ohms, 20 Hz to 20 kHz, 0.9% THD, 2-channels driven, FTC
- Speaker Impedance
- 4 to 16 Ohms
- Frequency Response
- 10 Hz to 100 kHz, +1, -3 dB (Direct Mode)
- Signal to Noise Ratio
- IHF-A, Line In, Speaker Out: 103 dB
IHF-A, Phono In, Speaker Out: 78 dB
- THD & Noise
- 0.05% @ 8 Ohms, 1 kHz, half power
- Damping Factor
- 95 (1 kHz, 8 Ohms)
- Tone Control
- Bass: +/-10 dB, 100 Hz
Treble: +/-10 dB, 10 kHz
- Input
- 5x stereo RCA pairs (1 phono with ground screw)
- Output
- 1x stereo RCA pair
1x RCA subwoofer pre-out
1x 1/4" (6.35mm) headphone (front)
- Speaker Connectors
- 2x gold-plated binding post pairs
- Other Connectors
- 1x 1/8" (3.5mm) Remote Interactive port
- Input Sensitivity/Impedance
- Line: 200 mV / 47 kOhms
Phono MM: 4 mV / 47 kOhms
- Output Level and Impedance
- Line Out: 0.2 V / 2.3 kOhms
Phono Overload: 70 mV (MM, 1 kHz, 0.5%)
- Power Requirements
- 120 VAC, 60 Hz
- Power Consumption
- Active: 140 W
Standby: Standby: 0.1 W
- Dimensions (W x H x D)
- 17.13 x 5.06 x 13" (435 x 129 x 330mm)
- Weight
- 15.4 lb (7kg)
|
Beautifully Brainy
The elegant design of the R-N803 is equally matched with powerful brainy internals - a full suite of modern technological and connectivity features make the receiver even more captivating and result in a receiver worthy to take home to your Wi-Fi and Hi-Fi.
Experience the Legend, Enjoy the Musicality
The legendary Yamaha Hi-Fi design concept ToP-ART (Total Purity Audio Reproduction Technology) combines a meticulously symmetrical left/right circuit layout and signal directness (straightest, shortest signal paths) with a low-vibration chassis of high rigidity. The chassis is equipped with the special resin frame "Art Base" that absorbs and blocks unnecessary vibration. The result is sonic purity and an accurate stereo image of your music.
High Precision, High Performance
The R-N803 uses the renowned SABRE 9006AS 192 kHz/24-bit DAC (from ESS technology) to deliver superior signal-to-noise ratio performance. Combined with the Yamaha original network module, the unit thoroughly draws out all the sonic merits of high-resolution sound sources, effectively reproducing even the subtle ambience of concert halls and delicate expressive nuances in the sound.
Optimized for the Ultimate
For the first time in a Hi-Fi receiver, the R-N803 is equipped with the Yamaha Parametric room Acoustic Optimizer (YPAO), a famed technology used in Yamaha AV receivers. It measures the shape of the room, the material of the wall and the position of the speaker, then automatically adjusts the sound to create the ideal response and sonic quality. The unit also features other advanced YPAO functions, including YPAO - Reflected Sound Control, which actively corrects the important early reflection sounds that greatly influence sound quality and YPAO Volume, which applies exceptionally high-precision EQ (equalization), with 192 kHz / 64-bit operation. The result? You can create an ideal listening environment right in your home, just like that of a professional audio listening room.
Sound Purity
Pure Direct mode enables the music signals to travel the shortest possible circuit route, bypassing the buffer amp and the tone, loudness and balance controls to virtually eliminate any signal degradation, for the purest sound quality.
Pure Delight to Own
This receiver inherits the simple and sophisticated design style for which Yamaha Hi-Fi audio is famous. Its elegant simplicity beautifully complements your other Hi-Fi audio components. The stylish design with high-quality materials deepens both the joy of ownership and the joy of listening.
Sophisticated Circuit Design
The power amp block adopts a symmetrical and direct circuit layout based on the ToP-ART concept, featuring a parallel push-pull structure using a total of eight bipolar-type power transistors (four each, on left and right) as its output terminals. And by minimizing the lengths of the audio signal paths in the circuit design, we've lowered impedance to achieve superb drive power with a maximum output of 145 watts (per channel).
Wireless
The R-N803 is equipped with Bluetooth to let you enjoy music playback from smartphones and other devices.
MusicCast
Access all of your music with a simple app and wirelessly stream it throughout your home using your existing Wi-Fi network.
Stream it all
Listen to Pandora, Spotify, Napster, SiriusXM Internet Radio, TIDAL, Deezer, thousands of free internet radio stations and the music stored on your smart devices and computers.
Wireless connectivity
All MusicCast products are fully loaded with Wi-Fi, Bluetooth and AirPlay.
Expand to a whole home audio experience
When you're ready, add MusicCast wireless speakers, sound bars or other devices in up to 9 other rooms and listen throughout your home.
No wires, easy installation
By using MusicCast, you don't need to fuss with placing wires through walls into other rooms.
Alexa on MusicCast
Amazon Alexa-enabled devices - including Echo, Dot, Tap and Show - can now control key functions of any MusicCast product using voice commands. Discover a new, exciting way to control music and entertainment experiences in your home.
Optical TV Input
The R-N803 is equipped for digital audio input with both audio and coaxial terminals. With an optical input, TV sound reaches new sonic platforms - pure, pristine and dynamic sound for all entertainment sources, from sports and other programs to movies and concerts.
Love for Vinyl
Throw your vinyl collection love and drop a needle with the phono input terminal that connects the R-N803 to a record player.
Discover New Favorites
Explore. Compatible with a large variety of popular streaming services, including Spotify, TIDAL, Deezer, Napster and others - the R-N803 encourages discovery of new music from all over the world.
- Beautiful and elegant front aluminum face with two channels of 145 W high-power output (0.019% THD)
- Phono input terminals for turntables and optical/coaxial audio inputs for TV
- Wireless Direct, Bluetooth, AirPlay and Wi-Fi to access to your music library, Pandora, Spotify, SiriusXM Internet Radio, TIDAL and Deezer
- YPAO - Yamaha's acoustic optimizer with Precision EQ, Volume and Reflected Sound Control
- Pure Direct and ToP-ART design to faithfully preserve the integrity of your music
- DSD 5.6 MHz, FLAC / WAV / AIFF 192 kHz / 24-bit, Apple Lossless 96 kHz / 24-bit playback
- Add audio in up to 9 additional rooms with MusicCast
- Voice control using your Alexa device like Echo or Echo Dot
- Network Section
- Wi-Fi with Wireless Direct
DLNA version 1.5 (DMR)
Apple AirPlay
Bluetooth version 2.1 + EDR, A2DP, AVRCP, SBC/AAC (receiving only)
- Supported File Formats
- MP3, WMA, MPEG4 AAC 48 kHz / 320 kbps, WAV, FLAC, AIFF 192 kHz / 24-bit, ALAC 96 kHz / 24-bit, DSD 2.8 / 5.6 MHz
- Minimum RMS Output Power
- 100W + 100W (8Ohms, 20 Hz-20 kHz, 0.019% THD)
- Maximum Power
- 160W + 160W (4Ohms, 1kHz, 0.7% THD, for Europe)
145W + 145W (8Ohms, 1 kHz, 10% THD)
- High Dynamic Power/Channel
- 140 / 170 / 220 / 290W (8/6/4/2Ohms)
- Frequency Response
- 0 +/- 0.5 dB / 0 +/- 1.0 dB
- Signal-to-Noise Ratio
- 100dB (Pure Direct on, 200mV) (CD)
- Damping Factor
- A Speakers, at 1 kHz: >=240 (8Ohms)
- Tuner Type
- AM/FM
- Audio In / Out
- 10/2
- Inputs
- 2x Optical TOSLINK
2x Digital coaxial
1x Stereo RCA phono with ground screw
4x Stereo RCA
1x USB (front)
- Outputs
- 2x Stereo RCA
1x 1/4" (6.35 mm) Headphone (front)
- Other Connectors
- 1x Ethernet LAN
1x FM antenna
1x AM antenna
1x Mono RCA subwoofer out
1x Trigger out
- Speaker Connectors
- 2 (L/R)
- FM 50dB Quieting Sensitivity
- 3 MuV (20.8 dBf) (IHF, 1 kHz, 100% Mod., Mono)
- FM Signal-to-Noise Ratio
- 69 dB/67 dB (Mono/Stereo)
- Pure Direct
- Yes
- ToP-ART
- Yes
- Standby Power Consumption
- 0.1W
Wired/Wi-Fi/Bluetooth, Network Standby On: 1.8W
Wireless Direct, Network Standby On: 1.9W
- Dimensions (WxHxD)
- 17.13 x 6 x 15.44" (43.51 x 15.24 x 39.22cm)
With antenna up: 17.13 x 8.5 x 15.44" (43.51 x 21.59 x 39.22cm)
- Weight
- 24.3 lbs (11.02kg)
|
High sound quality network Hi-Fi receiver with support for DSD 5.6 MHz reproduction. Compatible with MusicCast and packed with network functions. Unlimited enjoyment of many different sound sources including high-resolution sources, smartphones and streaming services. Now with MusicCast, this device can be expanded to deliver wireless multi room audio playback, all controlled by a simple app.
MusicCast
MusicCast makes it easy to bring music to every room in your home wirelessly with playback controlled by a simple app. Start with a MusicCast capable AV receiver in your main entertainment room for the ultimate home theater experience, then add MusicCast speakers, sound bars or Hi-Fi components in other rooms wirelessly.
All Your Content
MusicCast allows you to access your digital music library, streaming music services and Internet radio, as well as Bluetooth sources, your TV sound and external sources attached to your AV receiver, such as a Blu-ray Disc player or CD player.
Bluetooh Output for Convenient Music Streaming
The R-N602 is equipped with Bluetooth functionality to let you easily enjoy wireless music playback from smartphones and other devices. The Compressed Music Enhancer from Yamaha is now optimized for Bluetooth audio transmissions to ensure that your music will have vivid, lively sound quality during wireless playback.
Wireless Music Streaming via Bluetooth or AirPlay
Enjoy music from your smartphone or tablet wirelessly using a Bluetooth connection. You can also use the convenient AirPlay function for wireless music streaming from iPhone or iPads. In addition, a Network Standby mode provides the convenience of having the R-N602 turn on and off automatically.
Streaming Services Offer a Huge Range of Listening Choices
Enjoy support for music streaming services like Pandora, Spotify, Rhapsody and SiriusXM Internet radio means you'll enjoy a wide variety of music content. Furthermore, support for the vTuner radio station database enables sampling of Internet radio broadcasts from around the world.
Enjoy the Entire Spectrum of All Your Favorite Music Sources
The R-N602 is a stereo receiver and network audio player in a single unit. You can use it to easily play audio downloaded from the Internet, stored on a PC or NAS system or enjoy streaming music services and Internet radio (with vTuner). Moreover, the MusicCast app from Yamaha allows you to enjoy your favorite tunes on a smartphone or tablet device via a wireless connection.
Extensive Audio Codec and Format Support
This network stereo receiver is compatible with high-resolution audio codecs such as DSD / AIFF / FLAC / WAV / Apple Lossless. You will enjoy the excellent sound quality of these various high-resolution audio codecs from the USB input on the front panel or from network connected devices. It uses a Burr-Brown 192 kHz / 24-bit DAC that has a firmly established reputation for quality.
USB Digital Connection for iPod and iPhone on the Front Panel
A USB port on the front panel allows convenient connection of an iPod and iPhone, which also charges the iOS device when connected. Because the digital signal from the iPod and iPhone is transmitted directly to the receiver, there is no signal-loss or interference. You get to enjoy the best possible sound quality. In addition, you can use the receiver's remote control unit to operate the iPod and iPhone for basic playback control.
Gapless Playback Compatibility Allows Play without Interruption
Many live and classical albums have no gaps in the music. Gapless playback ensures that there are no pauses between audio files. This provides playback with no interruptions, the way it was meant to be heard.
ToP-ART Sound Quality Design and Highest Quality Parts
Everything in the R-N602 has been built for maximum performance. The internal design utilizes simple, direct transmission of the signals - ensuring optimum separation and elimination of noise and distortion for pure sound reproduction. This includes dual independent power supplies for the two sound sources (analog and digital) as well as original ToP-ART (Total Purity Audio Reproduction Technology) and Art Base chassis construction to fully protect audio signals from noise and vibration. Moreover, all parts and materials have been carefully selected and tested to make sure they are of only the highest quality so that they all work together to provide the absolute best sound possible.
Pure Direct Mode for Greater Sound Purity
Engaging the Pure Direct switch causes the audio signal to bypass the control circuits for bass, treble, balance and the back buffer amp. This improves sound quality while maintaining full output capacity. Shortening the signal route improves sound purity, helping to reproduce even the most delicate musical nuances.
Digital Audio Inputs for TV or Blu-ray Disc Players
The R-N602 is equipped for digital audio inputs with both optical and coaxial terminals. The optical is for receiving audio from a TV and the coaxial for receiving audio from a Blu-ray Disc player. The audio stays in the digital domain, giving you pure, pristine dynamic sound for all your entertainment sources.
Simple Yet Sophisticated Design
With a beautifully simple and unique design inherited directly from Yamaha Hi-Fi audio components, the R-N602 also boasts an easy-to-operate button layout. The aluminum front panel has a richly textured silver hairline finish. The control knobs are also of the same luxurious construction as used on the top-end models. Both inside and out, everything about the R-N602 demonstrates their commitment to superior design quality and ease of use.
ECO Mode and Auto Power Standby
The R-N602 has an ECO mode that reduces power consumption by about 20% and an Auto Power Standby function that you can set to turn the power off after two, four, eight or 12 hours.
This product can only be shipped to U.S. addresses.
- MusicCast wireless multi room audio support
- Bluetooth, built-in Wi-Fi and Wireless Direct
- AirPlay, Pandora, Rhapsody, Spotify, SiriusXM Internet Radio music streaming services
- DSD 2.8 MHz / 5.6 MHz, FLAC / WAV / AIFF 192 kHz / 24-bit, Apple Lossless 96 kHz / 24-bit playback
- Front panel USB connection for digital docking with iPod / iPhone and USB flash drives
- Pure Direct for greater sound purity
- ToP-ART sound quality design with high quality parts
- Digital audio inputs for TV or Blu-ray Disc players
- Phono input (MM)
- ECO mode and Auto Power Standby
- MusicCast
- Yes
- DLNA
- Version 1.5
- File Format
- DSD 2.8 MHz / 5.6 MHz, FLAC / WAV / AIFF 192 kHz / 24-bit, Apple Lossless 96 kHz / 24-bit playback
- Wi-Fi
- Yes (with Wireless Direct)
- AirPlay
- Yes
- Bluetooth
- Yes (AAC)
- Minimum RMS Output Power
- 80 W + 80 W (8 ohms, 20 Hz - 20 kHz, 0.04% THD)
- Maximum Power (4 ohms)
- 105 W + 105 W
- Maximum Power (8 ohms)
- 115 W + 115 W
- High Dynamic Power / Ch (8/6/4/ 2 ohm)
- 105 / 125 / 150 / 178 W
- Frequency Response
- 0 0.5 dB / 0 1.0 dB
- Total Harmonic Distortion (CD to Sp Out)
- 0.015% (40 W / 8 ohms)
- Signal-to-Noise Ratio (CD)
- 100 dB (Pure Direct on, 200 mV)
- Audio In / Out
- 9/2
- USB Input
- iPod / iPhone, USB memory, portable audio player
- Subwoofer Out
- Yes
- FM 50dB Quieting Sensitivity
- 3 microvolts (20.8 dBf)
- FM Signal-to-Noise Ratio (Mono / Stereo)
- 65 dB / 64 dB
- ToP-ART Technology
- Yes
- Standby Power Consumption
- 0.1 W
- Dimensions
- 17-1/8 x 6 x 15-7/16" (43.5 x 15.2 x 39.1 cm)
- Weight
- 21.6 lbs. (9.8 kg)
| The versatile amplifier for powering all your entertainment.
- Enjoy high-fidelity performance with 125 Watts per channel
- Power your bookshelf, floor-standing, in-wall, and in-ceiling speakers
- Stream everything you love with the Sonos app and AirPlay Connect your TV to create the ultimate entertainment system
- Amp is built to last and improve over time
Upgrade your wired speakers
Connect everything from your turntable and stereo to your wired speakers to enjoy vinyl, CDs, stored audio files, and streaming. You can even power outdoor speakers and expand your Sonos system to the backyard.
Amplify your TV experience
Enjoy stereo sound for shows, movies, and video games when you connect Amp to your speakers and TV. Wirelessly add a pair of Sonos One surrounds for immersive home theater.
Designed to keep cool
The rack-mountable design features a specially developed heatsink for optimized airflow and heat management.
Key Specs
Continuous Watts x Channel @ Ohms: 125 x 2 x 8
Input(s): Ethernet, HDMI, RCA
Audio
Continuous Watts x Channel @ Ohms: 125 x 2 x 8
Total Power Handling: 250 watts
Number of Channels: 2.1
Impedance: 8 ohms
Amplifier Class: D
Features
App-Controlled: Yes
Featured Streaming Services: Apple Music, Pandora, Spotify, YouTube
Wi-Fi Built-in: Yes
Dimensions: 2.52" x 8.54" x 8.54"
Weight: 4.6 pounds |
Immerse in 3D surround sound of Dolby Atmos or DTS:X, or you can still enjoy similar effects by Dolby Atmos Height Virtualizer and DTS Virtual:X even without height or surround speakers. Featuring Ultra HD, HDR10, HLG, and Dolby Vision pass through with support for HDCP 2.2., the VSX-934 offers evermore life-like images. You can stream songs from various sources via Wi-Fi, Bluetooth, DTS Play-Fi, SONOS system, and Apple AirPlay 2. Other highlights include a Powered Zone 2 feature with a dedicated DAC, Personal Preset buttons, and 2 HDMI outputs.
HDMI 2.1 with 8K
HDMI 2.1 is the most recent update of the HDMI spec and supports a range of higher video resolutions and refresh rates including 8K60 and 4K120, as well as Dynamic HDR formats. 8K delivers a super-immersive viewing experience with 2x the horizontal and vertical resolution of 4K, and 4 times as many pixels; and combined with 60Hz refresh rate enables smooth and sharp viewing of content with high-speed action. HDMI 2.1 with 8K ensures your system is ready for the clearest and cleanest picture available both now and down the road.
Enhanced Gaming
Own your opponents with HDMI 2.1 enhancements for gamers: 4K/120Hz HDR pass-through enables ultra-fast motion -VRR (Variable Refresh Rate) eliminates lag, stutter, and frame-tearing for fluid gameplay. - ALLM (Auto Low Latency Mode) optimizes latency from source to screen - QFT (Quick Frame Transport) limits lag for a smoother experience.
Immersive Sound from your TV Apps
E-ARC (Enhanced Audio Return Channel) simplifies connectivity and supports the latest high-bitrate audio formats including Dolby Atmos, DTS-HD Master Audio, DTS:X, Dolby TrueHD.
Streaming Music Services and Faster Wifi
Use Works with Sonos, Chromecast built-in, AirPlay 2, and DTS Play-Fi; includes Spotify, Amazon Music, Pandora, TIDAL, Deezer, or TuneIn streaming services.
Voice interaction at the touch of a button
Stay wirelessly connected to phone conversations and smart assistants by voice. Simple buttons on the bodies activate a mic so you can make and receive calls. Or ask Siri or the Google Assistant for help without reaching for your phone.
Dolby Atmos Height Virtualization
Creating a virtual surround and height effect from traditional speaker layouts without employing additional surround or height speakers.
Advanced MCACC Auto Room Tuning featuring Auto Phase Control Plus
Advanced MCACC adjusts the sound according to the listening room and speakers, and also creates clearer sound by suppressing the standing waves that occur between walls or ceiling and floor. Measurement of up to nine positions can be saved for a wide listening area. Auto Phase Control Plus makes real-time analysis of the phase difference, and automatically compensates the gap between the LFE and main signals, providing strong bass and clear high-frequency sound.
Roon-Tested
Roon plays to thousands of USB, Airplay, and Chromecast devices, but Roon-tested devices are profiled by the Roon team to ensure simple setup and effortless daily use. If you own a Roon-Tested device, you can have the confidence that you will enjoy the best possible experience with it.
- Pioneer has packed the VSX-935 with three independent 2.1 inputs (40Gbps 8K/60Hz, 4K/120Hz)
- Immersive sound capabilities via Dolby Atmos, DTS:X, and associated upmixers
- 11 different advanced surround listening modes
- Mid-range AV receiver with 7 channels of audio output
- Audio streaming options include Bluetooth, DTS Play-Fi with Critical Listening Mode, Chromecast built-in, AirPlay 2, Works with Sonos, and Room Tested
- Built-in support for services such as Spotify, TIDAL, Deezer, and Pandora, all of which can be accessed through the free Pioneer Music Control App
- The onboard Direct Energy Class AB amplifier is factory specified to deliver a peppy 80 watts per channel (20Hz-20kHz, 8 ohms, 2ch)
- 6 HDMI inputs and two outputs
- Access to Ethernet, rear USB, digital coax and optical, dual subwoofer pre-outs, four sets of RCA inputs, and a moving magnet phono input
- Power handling capability of 170rms per channel fills even the largest room with resonating theatre sound
- Ultra HD, HDR10, HLG, and Dolby Vision pass through display vivid images while the HDMI 2.1 combined with HDCP 2.3 increases the bandwidth to give high resolution output
- Variable Refresh Rate (VRR) removes the lag by increasing the image refreshing rate, so you can indulge in thrilling games and emotional videos without any stutter
- Auto Low Latency Mode (ALLM) and Quick Frame Transport (QFT)allows quick switching to the optimized mode to assure remarkable performance with no lag
- Dolby Atmos Height Virtualize optimizes the sound with more virtual surround and height effect without using additional speakers
- DTS Neural:X discards the need for a new speaker layout and auto tunes the audio to adapt to the existing channel and speaker system
- Compatibility with Alexa and Google Assistant ensure easy control over music services and internet radio
- Amplifier Design
- Direct Energy
- Power Output: Watts per Channel
- 80 W/ch (8 ohms, 20 Hz-20 kHz, THD 0.08 %, 2ch Driven, FTC), 170 W/ch (6 ohms, 1 kHz, THD 10 %, 1ch Driven)
- Power Output: Watts per Channel
- 80 W/ch (8 ohms, 20 Hz-20 kHz, THD 0.08 %, 2ch Driven, FTC), 170 W/ch (6 ohms, 1 kHz, THD 10 %, 1ch Driven)
- Channels
- 7.2
- Dolby Atmos, Dolby Surround Upmixer
- Yes
- DTS:X, DTS Neural:X Upmixer
- Yes
- Reflex Optimizer
- Yes
- Dolby Atmos Height Virtualizer
- Yes
- DTS Virtual: X
- Yes
- Dolby TrueHD, Dolby Digital Plus
- Yes
- Audio
- DTS-HD Master Audio, DTS-HD High Resolution Audio, DTS 96/24, DTS-ES, DTS-HD Express: Yes
- DSD Disc (SACD) Playback
- Yes, via HDMI (2.8 MHz/2ch, 5.1ch)
- Digital Quad-Core 32-bit DSP
- Yes (Cirrus Logic)
- 192 kHz/24-bit D/A Conversion for
- Yes (Hi-Res Audio)
- Enhanced Audio Return Channel (eARC)
- Yes, on HDMI Out (Main)
- Advanced Sound Retriever (2ch)
- Yes
- Advanced Surround Modes
- Classical, Unplugged, Entertainment Show, Drama, Advanced Game, Action, Rock/Pop, Sports, Extended Stereo, Mono Music, Front Stage Surround Advance
- Support HDMI 2.1
- (HDMI IN 1-3) with 8K, VRR (Variable Refresh Rate), ALLM (Auto Low Latency Mode), QFT (Quick Frame transport), DSC (Display Stream Compression), and QMS (Quick Media Switching) pass-through
- Supports HDR10+, HDR10, and HLG
- 8K/60p (4:2:0/10-bit), 8K/30p (4:4:4/10-bit, 4:2:2/12-bit), 4K/120p (4:4:4/10-bit, 4:2:2/12-bit), 4K60p (4:4:4/12-bit) and BT.2020 color; Deep Color (36-bit), "x.v.Color", LipSync, and HDCP 2.3
- Dolby Vision Compatible
- Yes
- Ultra HD Upscaling
- 4K to 8K, 1080p to 8K/4K
- Works with
- Alexa supporting multi-room music: Yes
Hey Google and Chromecast built-in: Yes
SONOS supporting multiple Sonos Connect control and Volume Pass Through mode: Yes
- DTS Play-Fi w/Pioneer Music Control App
- DTS Play-Fi supporting Critical Listening mode with Pioneer Music Control App: Yes
- Apple AirPlay 2 with Siri Voice Control
- Yes
- Music-Streaming Services Ready
- Amazon Music HD, Pandora, Spotify, TIDAL, and Deezer Hi-Fi: Yes
- Internet Radio with TuneIn
- Yes
- Hi-Res Audio File Playback
- Yes (via USB/Network)
- Up to 192 kHz/24-bit ALAC5
- Yes (AIFF, FLAC, WAV (RIFF) and 5.6 MHz DSD)
- Personal Preset
- Yes
- Dialog Enhancement
- Yes
- Dual Band (5 GHz/2.4 GHz) Wi-Fi Built-in
- Yes
- Bluetooth Wireless Technology
- Version: 4.2, Profile: A2DP 1.2/AVRCP 1.3, Codec: SBC/aptX/aptX HD (TX), SBC/AAC (RX) Built-in
- Pioneer Remote App
- Ready for Multi-room Entertainment Control and Network Streaming
- User-Friendly GUI with System Setup Menu
- Yes
- On-Screen Information for
- Yes (Audio, Video and Network)
- Web Setup
- Yes
- Auto Power Off in HDMI Standby Through
- Yes
- FM/AM Tuner 40 Presets
- Yes
- User-Friendly Simple Remote Control
- Yes
- USB 1 In for USB Drive
- Yes
- MCACC Setup MIC In
- Yes
- Audio 1 In (Mini Stereo Jack)
- Yes
- Phones 1 Out
- Yes
- 4K Ultra HD Pass-Through
- Yes (HDR10, HLG and BT.2020 Wide Color Gamut Signal Pass-through)
- 3-D Ready
- Yes
- HDMI Standby Through
- Yes with Input Switch / Last Memory
- HDMI 36-bit Deep Color
- Yes
- 4K Ultra HD Video Scaler
- Ultra HD Upscaling
- Audio Return Channel
- Yes
- Dolby Vision Compatible
- Yes
- HDMI x.v. Color
- Yes
- Video Converter to HDMI
- Yes
- Super Resolution
- Yes
- HDMI Input / Output
- 6 In (Rear) / 2 Out
- Wi-Fi Built-In
- Dual Band (5 GHz/2.4 GHz) Wi-Fi Built-in
- Digital Audio Inputs / Output
- 2 In (Optical 1, Coaxial 1)
- Headphone Output
- Yes
- AM/FM Presets
- AM/FM Tuner 40 Presets
- Bluetooth Built-In
- Yes (Version: 4.2 + LE, Profile: A2DP 1.2/AVRCP 1.3, Codec: SBC/AAC)
- USB Terminal
- Front and Rear
- Analog Audio Inputs / Output
- 2 in / 0 out
- Pre-Amp Output
- 0.2 ch.
- Front A/V Inputs
- USB / 3.5mm stereo mini jack
- On-Screen Display
- User-Friendly GUI with System Setup Menu
- Multi-Room and Source Output
- Powered Zone 2 with Dedicated DAC
- Sleep Timer
- Yes
- Auto Power Down
- Yes
- Remote
- Yes
- Versatile Speaker Configuration
- Speaker 9ch Out (FRONT, CENTER,SURROUND, SURROUND BACK/HEIGHT/Bi-AMP, ZONE 2)
- Front Panel
- Brushed
- Speaker Terminals
- 9 large
- Dimensions (W x H x D)
- 17.13 x 6.81 x 14.61" (435.10 x 172.97 x 371.09mm)
- Weight
- 20.7 lbs (9.38kg)
|
The Elite VSX-LX504 creates the soundscape of IMAX Enhanced and Dolby Atmos/DTS:X ideally calibrated with Advanced MCACC, and even provides similar sound effects with Dolby Atmos Height Virtualizer without height or surround speakers. Enjoy spectacles from next generation video standards with support for HDCP 2.2, or stream songs across the house with Multi Zone Music, SONOS system, FlareConnect, Chromecast built-in, DTS Play-Fi, and Apple AirPlay 2. Other features include Powered Zone 2/Zone 3 Audio, up to 11.2 MHz DSD direct playback, and 2 HDMI outputs.
IMAX Enhanced
The VSX-LX504 is IMAX Enhanced, certified to deliver the powerful sound just as intended by the filmmaker, and provide the immersive experience on your home theater.
Dolby Atmos/Dolby Surround Upmixing
By adding an external amplifier, the 9.2ch AV receiver can be expanded to decode 11ch to drive the 7.2.4ch configuration of Dolby Atmos. You can reproduce object-oriented sound in smooth, curving movements, or the realistic three-dimensional movement overhead by the top speakers. Other audio codecs such as PCM and DSD can be upmixed using Dolby Surround for enjoying 3D surround sound.
DTS:X/DTS Neural:X Upmixing
DTS:X is the next-generation audio codec from DTS that leverages object-based audio to enable new immersive and interactive audio experiences. By adding an external amplifier, the 9.2ch AV receiver can be expanded to decode 11ch for driving a 7.2.4ch surround system. Experience an immersive soundscape with incredibly rich and life-like audio. Other audio codecs such as PCM and DSD can be upmixed using DTS Neural:X for enjoying 3D surround sound.
Dolby Atmos Height Virtualization
When playing any Dolby format, engaging the Dolby Atmos Height Virtualizer enables a more immersive listening experience, creating a virtual surround and height effect from traditional speaker layouts without employing additional surround or height speakers.
Apple AirPlay 2
Apple AirPlay 2 lets you effortlessly stream music or podcasts to speakers throughout your house using any Apple device or by asking Siri, and it all stays in perfect sync.
Next Generation Video Standard Ready
The VSX-LX504 supports pass-through for HDR10, HLG (Hybrid Log-Gamma), and Dolby Vision signals. By connecting a compatible source device, you can enjoy these latest video standards on a compatible display. What's more, all HDMI terminals support 4K (60p/4:4:4/24-bit), Wide Color Gamut (BT.2020), and HDCP 2.2, so you will have no problem when upgrading to new devices, and can also enjoy premium content such as 4K videos with digital copy protection.
Advanced MCACC Auto Room Tuning featuring Auto Phase Control Plus
Advanced MCACC adjusts the sound according to the listening room and speakers, and also creates clearer sound by suppressing the standing waves that occur between walls or ceiling and floor. Measurement of up to nine positions can be saved for a wide listening area. Auto Phase Control Plus makes real-time analysis of the phase difference, and automatically compensates the gap between the LFE and main signals, providing strong bass and clear high-frequency sound.
Works with SONOS
By connecting the VSX-LX504 to Sonos Connect, you can play any music or audio source on your Sonos app. You can group the VSX-LX504 with other Sonos devices on the network, or use it independently. The AV receiver will automatically turn on and switch input as soon as you play music on your Sonos app.
Powered Zone 2/Zone 3
With the powered feature, the VSX-LX504 can directly drive speakers in other rooms, without the need for a separate amplifier. What's more, the dedicated DAC for Zone 2 lets you listen to all digital audio sources.
Zone B Output for Wireless Headphones
The VSX-LX504 is equipped with Zone B audio output terminals for expanding the Main Zone sound. You can listen to the sound playing in the living room via wireless headphones.
Chromecast built-in
The VSX-LX504 comes with Chromecast built-in, so you can use your mobile device to stream your favorite music, radio, or podcasts to your speaker. You can control the audio from anywhere in the house using Chromecastenabled apps running on your personal device-iPhone, iPad, Android phone and tablet, Mac and Windows laptop, and Chromebook. The VSX-LX504 also works with the Google Assistant, so you can tell it to turn up the volume, skip tracks, or stop the music using your Google Assistant enabled device, like Google Home.
Audio Features
• IMAX Enhanced
• Dolby Atmos, Dolby Surround Upmixer supports DTS Formats
• DTS:X, DTS Neural:X Upmixer supports Dolby Formats
• Reflex Optimizer
• Dolby Atmos Height Virtualizer
• Dolby TrueHD, Dolby Digital Plus
• DTS-HD Master Audio, DTS-HD High Resolution Audio, DTS 96/24, DTS-ES, DTS Express
• DSD Direct Playback via Network/USB (11.2, 5.6, 2.8 MHz/2 ch)
• DSD Disc (SACD) Playback via HDMI (2.8 MHz/2ch, 5.1ch)
• Digital Quad-Core 32-bit DSP (Cirrus Logic)+ Aureus floating-point DSP (TI)
• 384 kHz/32-bit D/A Conversion with AK4458 (AKM) & PCM5101A (TI)
• Enhanced Audio Return Channel (eARC) on HDMI
• Advanced MCACC Auto Room Tuning - Auto Phase Control Plus, Subwoofer EQ, Multi-point Standing Wave Control
• Advanced Sound Retriever (2ch)
• Advanced Surround Modes - Classical, Unplugged, Entertainment Show, Drama, Advanced Game, Action, Rock/Pop, Sports, Extended Stereo, Extended Mono, Front Stage Surround Advance
Video Features
• Ultra HD Pass-through with HDCP 2.2 (4K/60p/4:4:4/24-bit, 4K/24p/4:4:4/36-bit, 4K/60p/4:2:0/36-bit)
• HDR10, HLG and BT.2020 Wide Color Gamut Signal Pass-through
• Dolby Vision Compatible
• Ultra HD Upscaling (1080p to 4K)
• 3D Ready (Blu-ray Disc, Broadcast, and Games)
• Deep Color (36-bit), "x.v. Color"
Home Network Features
• FlareConnect for Multi-room Audio
• Chromecast built-in and Works with the Google Assistant
• DTS Play-Fi with Pioneer Music Control App
• Apple AirPlay 2
• Works with SONOS
• Amazon Music, Pandora, Spotify Freemium, Spotify Premium, TIDAL, and Deezer Music-Streaming Services Ready
• Internet Radio with TuneIn
• Hi-Res Audio File Playback via USB/Network - Up to 192 kHz/24-bit ALAC, AIFF, FLAC, WAV (RIFF) and 11.2 MHz DSD
Convenience Features
• Personal Preset
• Dialog Enhancement
• Dual Band (5 GHz/2.4 GHz) Wi-Fi Built-in
• Bluetooth Wireless Technology (Version: 4.2 + LE, Profile: A2DP 1.2/AVRCP 1.3, Codec: SBC/AAC) Built-in
• Pioneer Remote App Ready for Multi-room Entertainment Control and Network Streaming
• User-Friendly GUI with System Setup Menu
• On-Screen Information for Audio/Video Status
• PC Setup
• Auto Power Off in HDMI Standby Through
• AM/FM Tuner 40 Presets
• Sleep Timer
• User-Friendly Simple Remote Control
Front Terminals
• HDMI 1 In
• USB 1 In for USB Drive
• MCACC Setup MIC In
• Phones 1 Out (Gold-Plated)
Rear Terminals
• HDMI 6 In (4 Assignable)
• HDMI 2 Out (1 for MAIN, 1 for SUB)
• Ethernet 1 In
• USB 1 In for USB Drive
• AV (Component) 1 In (Assignable)
• AV (Composite) 2 In (Assignable)
• Audio 1 In (Assignable)
• Phono (MM) 1 In
• Digital Coaxial 1 In (Assignable)
• Digital Optical 1 In (Assignable)
• FRONT, CENTER, SURROUND, HEIGHT 1, SURROUND BACK, SUBWOOFER x 2 Pre Out
• ZONE B Line Out for Wireless Headphones
• ZONE 2 Pre/Line Out, ZONE 3/HEIGHT 2 Pre/Line Out
• Speaker 11ch Out (FRONT, CENTER, SURROUND, HEIGHT 1/Bi-AMP, SURROUND BACK/HEIGHT 2/ZONE 3, ZONE 2
• IR 1 In/1 Out
• 12 V Trigger 2 Out
• RS-232C
• FM/AM Antenna
- IMAX Enhanced
- Dolby Atmos/Dolby Surround Upmixing/Dolby Atmos Height Virtualizer
- DTS:X/DTS Neural:X Upmixing/DTS Virtual:X
- Apple AirPlay 2 / Works with SONOS
- Powered Zone 2/Zone 3
- 230 W/ch (6 ohms, 1 kHz, THD 10 %, 1ch Driven)
- 120 W/ch (8 ohms, 20 Hz-20 kHz, THD 0.08 %, 2ch Driven, FTC)
- Channels
- 9.2
7.2.2 or 5.2.4 in Dolby Atmos and DTS:X Setups
- Power Output per Channel
- 120 W per Channel @ 8 Ohms, 20 Hz to 20 kHz, 0.08% THD, 2 Channels Driven, FTC
230 W per Channel @ 6 Ohms, 1 kHz, 10% THD, 1 Channel Driven
- Speaker Impedance
- 4 to 16 Ohms
- Amplifier Type
- Direct Energy
- DAC
- 384 kHz / 32-Bit AKM (AK4458) + PCM5101A (TI)
- Dolby
- Dolby Atmos, Dolby TrueHD, Dolby Digital Plus
- DTS
- DTS:X, DTS Neural:X, DTS-HD Master Audio, DTS-HD High Resolution Audio, DTS 96/24, DTS-ES, DTS Express
- Maximum Resolution Supported
- 4K 60 Hz (4:4:4, 24-Bit)
- Tuner
- AM/FM
- FM/AM Preset Memory
- 40 Stations
- Wi-Fi
- Dual-Band 2.4 / 5 GHz
- Bluetooth
- Version: 4.2 + LE
Profiles: A2DP 1.2, AVRCP 1.3
Codecs: SBC, AAC
- Inputs
- 7 x HDMI
1 x Optical TOSLINK
1 x Digital Coaxial
1 x 3-RCA Component Video
2 x RCA Composite Video
5 x Stereo RCA (1 Phono with Ground Screw)
- Outputs
- 2 x HDMI
1 x 9-Channel RCA Pre-Out
1 x Stereo RCA Zone 2/B
1 x Stereo RCA Zone 3 / Height 2 Pre-/Line-Out
1 x Gold-Plated 1/4" / 6.35 mm Headphone (Front)
- Other Interfaces
- 1 x RJ45 Ethernet LAN
2 x USB (1 Front)
2 x Subwoofer Pre-Out
1 x 1/8" / 3.5 mm Setup Microphone (Front)
1 x AM Antenna
1 x FM Antenna
1 x DE-9 RS-232C Control
1 x 1/8" / 3.5 mm IR In
1 x 1/8" / 3.5 mm IR Out
2 x 1/8" / 3.5 mm 12 V Trigger Out
- Speaker Connectors
- 11 x Binding Post Pairs
- USB Playback Formats
- Up to 192 kHz / 24-Bit ALAC, AIFF, FLAC, WAV (RIFF), 11.2 MHz DSD (Converted to PCM)
- Power Requirements
- 120 VAC, 60 Hz
- Power Consumption (Active)
- 850 W
- Power Consumption (Standby)
- 0.15 W
- Dimensions (W x H x D)
- 17.1 x 7.3 x 15.2" (435 x 185 x 386mm)
- Weight
- 35.3 lb (16kg)
|
Reviews
There are no reviews yet.