| Content |
Integrated Stereo Amplifier
Versatile pre-main amp refreshes your music life
Onkyo builds on the success of its A-9010 pre-main amp with the new A-9110 Integrated Stereo Amplifier, a component that refines an original amp design that's won an excellent critical and commercial reputation for dynamic, musical sound. Lively dynamics, deep bass, and layered detail emerge from warm and expressive tuning sure to please European ears.
WRAT delivers high-current power stability via large custom capacitors, while low-NFB amps capture the depth and spatiality of analog and hi-res recordings. Five RCA inputs including MM phono stage connect your sources while high-quality speaker-posts reveal Onkyo's hi-fi heritage and careful attention to detail. The A-9110 invites you into each album, the hours passing comfortably in pure analog sound.
Stable high-current power with wide-range amplifiers
Dynamic changes in music cause impedance to fluctuate. If power can't be delivered when impedance drops, sound quality suffers. Onkyo's solution is WRAT, specifically its high-output EI transformer, huge custom-made main audio capacitors, and carefully selected high-quality parts. High-current stability controls the speaker-drivers for accurate and assured reproduction of dynamic musical passages.
Further, the A-9110 features Onkyo's time-proven low-negative-feedback amplifier topology that distinguishes the timbral warmth, fullness, and vibrancy of the recording. This circuitry captures a wide frequency spectrum with uncommonly low distortion.
Sounds clearer at low volumes
When playing music at low volume, the signal normally drops close to the component's noise floor. The signal picks up noise, which is amplified, and the result is muffled sound.
To avoid this, the A-9110 features Optimum Gain Volume Circuitry, a volume circuit that requires less than half the usual amount of attenuation. The signal never approaches the noise floor, so you can enjoy clearest sound at low volume.
Phase Matching Bass Boost enriches sound at low volume
Most pre-main amps have a loudness button designed to boost low-mid frequency sound. However, conventional designs are prone to phase-shift, which degrades the clarity of the vocal frequency band.
Onkyo's Phase Matching Bass Boost function eliminates phase-shift between low- and mid-range frequency bands above 300 Hz.
Bass response is enhanced without compromising vocal clarity, and that's something especially useful when playing music at low volume where bass and high-frequency sounds are more difficult to hear.
Thick and rigid chassis tames resonance
Every hi-fi component generates electromechanical resonance. This translates into signal noise, and that impacts on the sound coming out of your speakers. To combat the negative effects of vibration, the A-9110 features a rigid metal chassis that's 1.3 times thicker than the A-9010 at 1.6 mm. Working together with large, wide-spaced insulators, unwanted resonance is virtually eliminated.
Direct Mode brings you closer to the source
Direct Mode bypasses tone and PM Bass circuitries. In combination with a refined amp circuit design, signal-path-lengths have been significantly reduced in comparison to the A-9010 for even more accurate and faithful sound.
Enjoy end-to-end analog music reproduction from turntable to speakers, and recapture the atmosphere of the original recording with any connected source.
New fine display shares info clearly
A new display panel boasts fine text resolution, making it easier to read at a distance than single bulbs. It shows active selected input at a glance.
Quality speaker-posts make perfect contact
Speaker cables with your choice of terminal are firmly secured by high-quality speaker binding posts. Each wide-spaced non-magnetic post prevents interference and features a large, easy-to-grip transparent knob.
- A-9110 Features:
- 50 W + 50 W high-current amplification
- WRAT (Wide Range Amplification Technology)
- Direct Mode for source-authentic audio reproduction
- Phase Matching Bass Boost
- High-current EI transformer, large custom audio capacitors, and discrete output stage
- New fine display for easy source selection
- Amplification Features:
- 50 W + 50 W (4 Ohm, 20 Hz-20 kHz, 0.9% THD, 2-ch driven, IEC)
- Optimum Gain Volume Circuitry for clear low-volume playback
- 4 Ohm speaker-driving capability
- Rigid anti-resonant 1.6 mm metal chassis
- Direct Mode for source-authentic audio reproduction
- Connection Features:
- 4x Analog RCA inputs
- 1x Phono input with discrete MM phono equalizer
- 1x Analog RCA line-level output
- Subwoofer pre-out
- Non-magnetic speaker posts with clear knobs
- 6.35 mm headphone jack
- RI (Remote Interactive) input
- Additional Features:
- Fine display shows active input
- Independent tone controls for bass and treble with balance control
- Easy-to-use controls for smooth operation without a remote
- RI (Remote Interactive) input enables connection of a supported component for integrated control with one remote controller
- Auto Power Standby
- Number of Channels
- 2
- Power Rating
- 50 W per channel @ 4 Ohms, 20 Hz to 20 kHz, 0.9% THD, 2-channels driven, FTC
- Speaker Impedance
- 4 to 16 Ohms
- Frequency Response
- 10 Hz to 100 kHz, +1, -3 dB (Direct Mode)
- Signal to Noise Ratio
- IHF-A, Line In, Speaker Out: 103 dB
IHF-A, Phono In, Speaker Out: 78 dB
- THD & Noise
- 0.05% @ 8 Ohms, 1 kHz, half power
- Damping Factor
- 95 (1 kHz, 8 Ohms)
- Tone Control
- Bass: +/-10 dB, 100 Hz
Treble: +/-10 dB, 10 kHz
- Input
- 5x stereo RCA pairs (1 phono with ground screw)
- Output
- 1x stereo RCA pair
1x RCA subwoofer pre-out
1x 1/4" (6.35mm) headphone (front)
- Speaker Connectors
- 2x gold-plated binding post pairs
- Other Connectors
- 1x 1/8" (3.5mm) Remote Interactive port
- Input Sensitivity/Impedance
- Line: 200 mV / 47 kOhms
Phono MM: 4 mV / 47 kOhms
- Output Level and Impedance
- Line Out: 0.2 V / 2.3 kOhms
Phono Overload: 70 mV (MM, 1 kHz, 0.5%)
- Power Requirements
- 120 VAC, 60 Hz
- Power Consumption
- Active: 140 W
Standby: Standby: 0.1 W
- Dimensions (W x H x D)
- 17.13 x 5.06 x 13" (435 x 129 x 330mm)
- Weight
- 15.4 lb (7kg)
|
Equipped with the 6th generation of Direct Energy HD Amplifier, the SC-LX704 is worthy of being your home cinema's centerpiece, and an ideal combination for Pioneer's flagship universal disc player. Two ES9026PRO DACs ensure quality audio reproduction, while MCACC Pro Auto Room Tuning technology with Full Band Phase Control brings out the best from 3D surround sounds of IMAX Enhanced, Dolby Atmos, and DTS:X. Enjoy rich, vibrant sound with PQLS jitterless transmission. The new Audio Exclusive Mode and AV Direct Mode enhance detailed sound reproduction by turning off the unused functions to eliminate unwanted noise.
Direct Energy HD Class D Switching Amplifier
Continuously evolving throughout the years, Pioneer's Direct Energy HD Amp has now reached the 6th generation. New power coils are adopted for the ideal speaker drive, as well as new custom film capacitors co-developed with Shinyei Capacitor for the ultimate sound. The power supply and patterning has been developed through repeated tuning. Also, the entire transmission path from the pre stage to the power stage has been changed to balanced circuitry, to transmit noise-free high-quality signals to the power stage.
MCACC Pro Auto Room Tuning
MCACC Pro, the pinnacle of Pioneer's auto room tuning technology, analyzes the phase and group delay characteristics to precisely control phase differences between speakers. MCACC Pro corrects phase differences in all ranges and all channels, from phase difference in the original audio material to the sound emitted from the speakers. Required microphone included.
IMAX Enhanced MODE
IMAX digitally re-mastered content for the home environment is created to provide the same sharp 4K HDR images and powerful sound just as the filmmaker intended. Pioneer Elite's IMAX Mode is meticulously optimized to play digitally remastered content to deliver the best viewing and listening experience on Earth.
ESS 384 kHz/32-bit DAC
Two 384 kHz/32-bit ESS DACs (ES9026PRO), same as the ones used for Pioneers PD-70AE SACD player, are used for all channels. With extremely precise D/A conversion and high S/N ratio, the DAC provides powerful sound full of rich details.
Dolby Atmos
You can reproduce object-oriented sound in smooth, curving movements, or the realistic three-dimensional movement overhead by the top speakers.
DTS:X
Can automatically adapt the audio to the existing channels and speaker system, no specific speaker layout is required.
Full Band Phase Control
Pioneer's Phase Control technology effectively eliminates phase lag and significantly improves the multi-channel sound without any extra operation. Furthermore, The Full Band Phase Control technology focuses on the group delay in the speaker network filter, and adjusts the phase of each unit as well as the group delay for each speaker. Multi-range speakers gain the sound coherence of full-range speakers, while retaining the wide frequency range advantage. In an environment where the phase of all units and all channels are precisely controlled, a remarkably clear sound location with a surrounding feel is achieved. In combination with MCACC Pro, the ideal multi-channel reproduction environment can be created, which faithfully replicates object audio and the intention of the original content developer.
PQFA Jitterless Sound Processing for Network/USB
With PQFA (Precision Quartz File-based Audio), clocks are available for each stage of input, digital signal processing, and D/A conversion, and the shorter path prevents jitter from occurring. Additionally, a high-precision clock IC (OSC) is used to realise D/A conversion with significantly less jitter.
PQLS Jitterless Sound Transmission
With the precision quartz controller on the AV receiver, Precision Quartz Lock System (PQLS) eliminates distortion caused by timing errors. It controls the amount of audio signals from the AV receiver to the Pioneer universal disc player connected via HDMI, giving the best possible digital-to-analog conversion.
Audio Exclusive Mode
Interference from video signals is eliminated by turning off the video signal path via HDMI. You can enjoy detailed sound, full of spatial feel.
AV Direct Mode
The feature turns off the network functions to suppress digital noise within the AV receiver, and improves sound quality for analog playback, digital input, HDMI playback etc. Mode 1 turns off the network module operation clock, while Mode 2 shuts down the network power completely for more superior sound.
Works with Alexa
Works with Alexa makes you control SC-LX704 with your voice via Alexa-enabled device such as the Amazon Echo, to play, pause, and skip titles or control the volume. You can enjoy the music via streaming service such like Amazon Music by selecting song title, artist name, release year, and genre.
Ready for 4K HDR entertainment
Enjoy support for HDR (High Dynamic Range) video including HDR10, HLG, Dolby Vision, and BT.2020. The 4:4:4 color space is also supported. Six HDMI inputs, ARC-ready MAIN OUT, and SUB OUT pass 4K/60p and HDR video from player to compatible TV and projector and all terminals are HDCP 2.2 compliant.
High-Performance AC Cable
Included detachable OFC power cable contributes to superior sound.
Anti-Standing Wave Insulators
Features a special form with no parallel sides inside to prevent cavity resonance. This makes the sound localisation, tone, and scale clearer, while also contributing to seamless connection between the channels and improved response to quick sound.
- Direct Energy HD Amplifier
- MCACC Pro Auto Room Tuning
- IMAX Enhanced
- ESS 384 kHz/32-bit DAC
- Dolby Atmos/Dolby Surround Upmixing
- DTS:X/DTS Neural:X Upmixing
- Full Band Phase Control
- 2 Subwoofer Pre-Out
- PQLS Jitterless Sound Transmission
- PQFA Jitterless Sound Processing for Network/USB
- Audio Exclusive Mode
- AV Direct Mode
- Works with Alexa
- Next Generation Video Standard Ready
- Anti-Standing Wave Insulators
- AC Inlet Type Thick Cable
- Amplifier Design
- Class D3 (Direct Energy HD)
- Multi-ch Simultaneous Drive
- 760 W (8ohms, 1 kHz, THD 1 %)
- 4 Ohm Speaker
- Yes
- Channels
- 9.2
- 8 ohms, 1kHz, THD 0.08 %, 2ch Driven FTC
- 135W+135W
- Power Consumption
- 310W/0.2W (Estimated Power Consumption/Network Standby off)
- AirPlay
- Apple AirPlay 2
- Internet Radio
- TuneIn Radio
- Works with the Google Assistant
- Yes (Chromecast built-in)
- FlareConnect for Multi-room Audio
- Yes
- Roon Tested
- Yes
- Streaming Audio From PC/Network
- Yes
- iOS/Android Remote Control APP
- Pioneer Control App
- Works with Alexa
- Yes (Firmware update)
- DTS Play-Fi w/Pioneer Music Control App
- Yes
- Music-Streaming Services Ready
- Amazon Music, Pandora, Spotify, TIDAL, and Deezer Hi-Fi: Yes
- Digital Core DSP Engine
- Digital Quad-Core 32-bit DSP (Cirrus Logic) + Aureus floating- point DSP (TI)
- Audio Processing
- 11.2
- IMAX Enhanced
- Yes
- Dolby Atmos Height Virtualizer
- Yes
- Dolby Digital Plus
- Yes
- DTS-HD Master Audio
- Yes
- HDMI SACD Transfer
- Multi-Channel
- Audio DACs
- 384 kHz/32-bit D/A Conversion with ES9026PRO x 2
- Music File Playback
- 192 kHz/24-bit ALAC, AIFF, FLAC, WAV (RIFF) and 11.2 MHz DSD
- Dolby Atmos
- Yes
- Dolby TrueHD
- Yes
- DTS:X
- Yes
- DTS Neural:X
- Yes
- MCACC
- Yes (Pro)
- Full Band Phase Control
- Yes
- Phase Control
- Yes
- EQ Bands
- 9-Band
- Distance Adjustment
- 0.05'
- Auto Subwoofer Crossover
- Yes
- MCACC Memory
- 3
- Auto Phase Control Plus
- Yes
- Standing Wave Control
- Multi-point (9 points)
- EQ Type
- LR SYMMETRY EQ, FRONT ALIGN EQ, ALL CH ADJUST EQ
- Polarity Check
- Yes
- Auto Surround
- Yes
- Advanced Surround
- 10+1
- Stream Direct
- Yes (Direct, Pure Direct)
- Front Stage Surround Advance
- Yes
- Dialog Enhancement
- Yes
- DSD Music File
- Yes
- Sound Delay (Lip Sync)
- Yes
- Bi-Amp
- Yes
- Advanced Sound Retriever
- Yes (2ch)
- Tone Control
- Multi
- Speaker A/B
- Yes
- 4K Ultra HD Pass-Through
- Ultra HD Pass-through with HDCP 2.3 (4K/60p/4:4:4/24-bit, 4K/24p/4:4:4/36-bit, 4K/60p/4:2:0/36-bit)
- 3-D Ready
- Yes
- HDMI Standby Through
- Yes with Input Switch/Last Memory
- Dolby Vision Compatible
- Yes
- HDMI x.v. Color
- Yes
- Super Resolution
- Yes
- 4K Ultra HD Video Scaler
- Yes (1080p to 4K)
- Audio Return Channel
- Yes (eARC)
- HDR
- HDR10, HLG and BT.2020 Wide Color Gamut Signal Pass-through
- HDMI 36-bit Deep Color
- Yes
- Video Converter to HDMI
- Yes
- HDMI Input/Output
- 7 In (6 Rear, 1 Front)/3 Out
- Bluetooth Built-In
- Bluetooth Wireless Technology (Version: 4.2, Profile: A2DP 1.2/AVRCP 1.3, Codec: SBC/AAC) Built-in
- Composite A/V Input/Output
- 2 in
- Ethernet Input
- Yes
- Digital Audio Inputs/Output
- 5 in (Optical 3, Coaxial 2)/0 out
- Headphone Output
- Yes
- Phono Input
- Yes
- Wi-Fi Built-In
- Dual Band (5 GHz/2.4 GHz) 802.11ac Compliant Wi-Fi Built-in
- Component Video Input/Output
- 2 in
- USB Terminal
- Front and Rear
- Analog Audio Inputs/Output
- 6 in/0 out
- Pre-Amp Output
- 11.2 ch
- Front A/V Inputs
- USB & HDMI
- AM/FM Presets
- AM/FM Tuner 40 Presets
- On-Screen Display
- User-Friendly GUI with System Setup Menu
- Powered Zone output
- ZONE2/ZONE3
- Zone 2 Sources
- All Audio Sources
- 12 Volt Trigger (Assignable)
- A.B
- IR Serial Remote In/Out
- 2 in/1 out
- Function Rename
- Yes
- Personal Preset
- Yes
- Versatile Speaker Configuration
- Yes
- Auto Power Down
- Yes
- Multi-Room and Source Output
- ZONE2/ZONE3 Pre/Line Out
- Zone 3 Sources
- Analog/Net/Bluetooth/Tuner
- RS-232C
- Yes
- FL Dimmer
- Yes
- Remote
- Yes
- Sleep Timer
- Yes
- Alumium Front Panel
- Yes
- Transformer Stabilizer
- Yes
- 3D Space Frame Construction
- Yes
- Speaker Terminals
- 11 Large
- Advanced Direct Construction
- Yes
- Dimensions (W x H x D)
- 17-1/8 x 7-5/16 x 17-5/16 inches (435 x 185 x 440mm)
- Weight
- 40.8 lbs (18.5kg)
| The Yamaha A-S701 Integrated Silver Amplifier is designed for pure sound quality and outstanding drive power. An integrated amplifier with the advantage of analog and digital inputs.
High Quality Circuit Design Based on the ToP-ART (Total Purity Audio Reproduction Technology) Concept
The amplifier design technology from Yamaha is called ToP-ART, which features an input to output with a direct symmetrical design. ToP-ART design and ART Base ensure optimum sound when processing and transmitting the audio signal. The signal is simple and direct, so therefore it is less likely to be affected by noise and distortion. The left and right channels are organized in a straight, symmetrical layout for the highest signal purity. In addition, the ART (Anti-Resonance and Tough) Base bottom chassis and a solid center bar provide high rigidity support and dampers vibration. These design innovations contribute to this amplifier's rich audio reproduction with abundant musicality.
High Quality Parts for Outstanding Audio Performance
Notice the custom-made power transformer, custom-made block capacitors, two direct signal path speaker relays, one point grounding system, extruded aluminum heat sinks and other top-quality parts to effortlessly handle demanding audio conditions. The quality of each individual part, as well as how they work together, basically determines the sound quality of this component. Yamaha uses only very high quality parts, carefully selected and tested for their sound properties.
Created by Rich Experience, Tradition and High Technological Expertise
Yamaha, with a long history of over 125 years as a musical instrument maker, also has a high reputation for Hi-Fi components. The A-S301 is created by taking advantage of this rich experience and high technological expertise. Based on the concept of "Natural Sound" for reproducing all music as it really sounds, this amplifier is built with scrupulous care from its circuit design to basic sound production
CD Direct Amplification and Pure Direct Mode for Greater Sound Purity
With a straight connection to the CD input, CD Direct Amplification maximizes the CD source's signal to noise ratio. Additionally, engaging the Pure Direct mode causes the music signals to travel the shortest possible circuit route, bypassing the buffer amp, the tone, loudness and balance controls to virtually eliminate any signal degradation for the purest sound quality..
Continuously Variable Loudness Control
The A-S301 also features a new analog loudness control on the front panel that uses electronic volume for higher sound quality, which lets you adjust the loudness effect as desired. Separate from the overall volume, this controls the balance of the low and high frequencies, providing full tonal range at any volume level by compensating for the natural loss in the human ear at soft levels.
Gold Plated Terminals
Gold plated terminals ensure a high quality connection that prevents signal loss. The A-S501 has gold plated speaker and input terminals.
Digital Audio Input for TV and/or Blu-ray Disc Player
The A-S301 is equipped for digital audio inputs with an optical and digital coaxial input terminal. The optical is for receiving audio from a TV and the coaxial for receiving audio from a Blu-ray Disc player. The audio stays in the digital domain, giving you pure, pristine and dynamic sound for all of your entertainment sources.
Connection for YBA-11 Bluetooth Wireless Adapter (Optional Accessory)
With the YBA-11, you'll be able to stream music wirelessly from a Bluetooth compatible mobile phone or a PC. Thanks to the digital coaxial connection and the aptx audio coding algorithm, you will enjoy wireless music streaming with optimum sound quality. You can also conveniently power the YBA-11 via the DC out connection on the rear panel of this amplifier.
Speaker A, B or A+B Selection and Speaker Terminals for Two Systems
You can connect two separate speaker systems and hear them in different rooms at the same time. There are four terminals, so by just rotating a simple selector dial, you can switch between the two pairs of speakers to play the selected source.
Subwoofer Terminal
A terminal for connecting a subwoofer is provided, allowing you to increase the bass output of your system for a more powerful sound with better overall sound quality.
Phono Moving Magnet Input Terminal
You can connect a turntable with a MM phono cartridge to play vinyl records. Get the best of both worlds whether listening to analog vinyl or the latest digital technology.
Simple Yet Sophisticated Design
With a beautiful, simple and unique design inherited directly from Yamaha Hi-Fi audio components, this amplifier also boasts an easy to operate layout. The aluminum front panel has a richly textured silver hairline finish. The control knobs are also of the same luxurious construction as used on top end models.
Remote Control with Clean, Simple Design
The clean, simple design of the remote control provides easy to understand operation with a single hand. The design makes it simple to adjust inputs, volume and more. The unit has a sophisticated looking hairline finish that matches the design of the amplifiers. You can also use the remote to control a Yamaha CD player.
Rotary Encoder Input Selector with LEDs
The rotary encoder makes it quick and easy to select input sources. The luxurious hairline finish offers a nice tactile feeling. LEDs clearly show which source is selected, so you can easily switch sources, even in a dark room.
Auto Power Standby Function
When Auto Power Standby is engaged, the amplifier will automatically shift itself into standby mode when a user function has not been executed in eight hours. This is a great function if you forget to turn the amplifier off and it will help minimize power consumption when the unit is not in use.
This product can only be shipped to U.S. addresses.
- Minimum RMS Output Power
- 8 Ohms: 100 W + 100 W (0.019% THD)
6 Ohms: 120 W + 120 W (0.038% THD)
- High Dynamic Power/Channel
- 140 / 170 / 220 / 290 W at 8 / 6 / 4 / 2 Ohms
- Frequency Response
- 10 Hz - 100 kHz +/- 1.0 dB
- Maximum power per channel
- 1 kHz, 0.7% THD, 4 Ohms: 160 W
- IEC power
- 1 kHz, 0.019% THD, 8 Ohms: 115W
- Power band width
- 0.04% THD, 50 W, 8 Ohms: 10 Hz to 50 kHz
- Maximum Effective Output Power
- 1 kHz, 10% THD, 6 Ohms: 170 W
- Input sensitivity/Input impedance
- PHONO (MM): 3.0 mV/47 kOhmss
CD, etc: 200 mV/47 kOhmss
- Maximum input signal
- PHONO (MM) (1 kHz, 0. 03%THD): 45 mV or more
CD etc. (1 kHz, 0.5% THD): 2.2 V or more
- Output level/Output impedance
- REC OUT: 200 mV/1.0 kOhmss or less
SUBWOOFER OUT: 3.5 V/1.2 kOhmss
- Phones jack rated output/Impedance
- CD, etc. (Input 1 kHz, 200 mV, 8 Ohms: 470 mV/470 Ohms
- RIAA equalization deviation
- PHONO (MM): +/- 0.5 dB
- Channel separation
- CD, etc. (5.1 kOhmss input shorted,1kHz): 65 dB or more
CD, etc. (5.1 kOhmss input shorted,10 kHz): 50 dB or more
- Bass
- Boost/Cut (20 Hz): +/- 10 dB
Turnover frequency: 400 Hz
- Treble
- Boost/Cut (20 Hz): +/- 10 dB
Turnover frequency: 3.5 kHz
- Continuous loudness control
- - 30 dB
- PCM word depth
- 24 bit/16 bit
- Power supply
- AC 120 V, 60 Hz
- Power consumption
- 270 W
- Standby power consumption
- 0.5 W
- Maximum power consumption
- 580 W
- Total Harmonic Distortion (CD to Sp Out)
- 0.019% (50 W / 8 Ohms)
- Signal-to-Noise Ratio (CD)
- 99 dB (input shorted, 200 mV)
- Damping Factor
- 240
- Digital Input
- Yes (optical / coaxial)
- Audio In / Out
- 8 / 2
- Subwoofer Out
- Yes
- Pure Direct
- Yes
- ToP-ART
- Yes
- Switchable CD Direct Amplification
- Yes
- DC out
- Yes
- Standby Power Consumption
- 0.5 W
- Power Management (Auto Power Standby)
- Yes
- Dimensions (W x H x D)
- 17.12 x 6 x 15.25" / 434.84 x 152.4 x 387.35mm
- Weight
- 24.7lbs / 11.20kg
|
Massive THX sound and Film-Like 8K resolution
Rigorously tested to receive the coveted THX Select Certification, the Onkyo TX-NR6100 7.2-Channel AV Receiver delivers precision sound and images.
With an emphasis on an enhanced gaming experience, own your opponents with HDMI 2.1 enhancements for gamers: 4K/120Hz HDR pass-through enables ultra-fast motion -VRR (Variable Refresh Rate) eliminates lag, stutter, and frame-tearing for fluid gameplay. - ALLM (Auto Low Latency Mode) optimizes latency from source to screen - QFT (Quick Frame Transport) limits lag for a smoother experience.
Setting the bar for reference sound while bringing 8K video to your compatible display over HDMI 2.1, you can enjoy Dolby Atmos and DTS: X soundtracks through your height-enabled surround system or use upmixing and virtualization solutions from DTS and Dolby to create a 3D sound-field from any layout.
Featuring three HDMI outputs and 100 watts of power per channel, the TX-NR6100 AV receiver delivers uncompressed HDMI 2.1 8K 60Hz and 4K/120Hz with HDR over 40 gbps, increasing the bandwidth over its predecessors. This SMART AV Receiver delivers an unparalleled movie, music, and gaming experience to your living room.
HDMI 2.1 with 8K
HDMI 2.1 is the most recent update of the HDMI spec and supports eARC, a range of higher video resolutions and refresh rates including 8K60 and 4K120, and Dynamic HDR formats. 8K delivers a super-immersive viewing experience with 2x the horizontal and vertical resolution of 4K, and 4 times as many pixels; and combined with 60Hz refresh rate enables smooth and sharp viewing of content with high-speed action. HDMI 2.1 with 8K and eARC ensures your system is ready for the clearest and cleanest picture available both now and down the road.
Ultimate 4K Gaming Experience
Own your opponents with HDMI 2.1 enhancements for gamers: 4K/120Hz HDR pass-through enables ultra-fast motion -VRR (Variable Refresh Rate) eliminates lag, stutter, and frame-tearing for fluid gameplay. - ALLM (Auto Low Latency Mode) optimizes latency from source to screen - QFT (Quick Frame Transport) limits lag for a smoother experience.
THX Certified
In 1993, Onkyo became the first consumer electronics brand to be THX-certified. With literally thousands of tests, before earning the THX-certification logo: no matter what input is used, no matter what combination of the many built-in features for the AVR, preamplifier, or amplifier, there can be absolutely nothing added, nothing taken away from the source material.
Built-In Streaming Services
Access to Spotify, TIDAL, Deezer, TuneIn, and Pandora are built into the system. Use dedicated apps (where available) or the free Onkyo Control App for Apple and Android devices to find and play music.
Discrete Zone 2 HDMI Switching
Set up different Ultra High-Definition entertainment options with up to 8K60 resolution* in two different rooms from your Onkyo receiver. Watch a movie in the home theater, while the kids watch cartoons in their playroom.
Smart Home Compatible with Voice Control
Onkyo receivers easily integrate into your existing Smart Home ecosystem, including Apple Airplay, Alexa, Google apps, and more. You get a highly capable and compatible network device that can operate seamlessly in your multi-room ecosystem.
Works with SONOS Certified
This receiver can join your existing Sonos Home Sound System, or be the start of a new one, just by pairing it with a Sonos Port. This works with Sonos Certified AVR offers a best-in-class tie-in to the Sonos ecosystem, waking, changing inputs, and playing at the volume you want using the Sonos Volume-Pass Through feature from the Sonos app.
Bi-Directional Bluetooth Wireless Technology
This Onkyo AVR can send and receive audio via Bluetooth wireless technology. Stream from your device to the receiver using SBC or AAC codecs, or transmit audio playing through the AVR to compatible wireless headphones using SBC, aptX, or aptX HD codecs including 24-bit audio over aptX HD. The improved data transfer capabilities of the latest generation of Bluetooth ensure clear and reliable sound reproduction so you hear your favorite songs just as the recording engineer intended.
Ready for DTS PLAY-FI
DTS Play-Fi allows you to enjoy high-quality music from connected online services, networked media servers, and your device library over Wi-Fi to any number of compatible products using the Onkyo Music Control App for iPad, iPhone, and Android smartphones/tablets. DTS Play-Fi can synchronize the music in every room. Each member of your family can use their own device to listen to their music in a room or group of rooms. DTS Play-Fi lets you structure a comprehensive multi-room ecosystem that satisfies virtually any need.
- 8K with HDMI 2.1 40Gbps (3 ins)
- THX Select Certification
- Discrete Zone 2 Audio and Video
- 210 W/Ch THX Certified Select Dynamic Audio Amplification system
- 5.2.2-channel Dolby Atmos and DTS:X playback
- AccuReflex phase-matching solution for Atmos-enabled speakers
- SMART AV Receiver
- Works with Hey Google or Alexa
- Stream over 5 GHz/2.4 GHz dual-band Wi-Fi supporting the 802.11ac standard
- HDMI Sub/Zone 2 Out for media transmission to a second display
- Send or receive audio via Bluetooth wireless technology
- Refined chassis, HDMI board, DAC, Digital/Analog inputs, power-amp grounds and power lines
- 5.2-ch Main + Powered Zone 2 speakers support synced/independent D/A audio playback
- Zone 2/Zone B line-out
- Power Output (All Channels)
- 210 W/Ch (6 ohms, 1 kHz, 10% THD,1-ch driven)
100 W/Ch (8 ohms, 20 Hz-20 kHz, 0.08% THD, 2-ch driven, FTC)
- Dynamic Power
- 240 W (3 ohms, Front) 210 W (4 ohms, Front)
120 W (8 ohms, Front)
- THD+N (Total Harmonic Distortion+Noise)
- 0.08% (20 Hz-20 kHz, half Power)
- Input Sensitivity and Impedance
- 200 mV rms/47 k-ohms (Line) 3.5 mV rms/47 k-ohms (Phono MM)
- Rated RCA Output Level and Impedance
- 1 V rms/470 ohms (Subwoofer pre-out) 200 mV rms/470 ohms (Zone 2/Zone B line-out)
- Frequency Response
- 10 Hz-100 kHz/+1 dB, -3 dB (Direct/Pure Audio)
- Tone Control
- +/-10 dB, 20 Hz (Bass) +/-10 dB, 20 kHz (Treble)
- Signal-to-Noise Ratio
- 106 dB (Line, IHF-A) 80 dB (Phono, IHF-A)
- Speaker Impedance
- 4-16 ohms
- FM
- 87.5 MHz-107.9 MHz
- AM
- 530 kHz-1,710 kHz
- FM/AM Preset Memory
- 40 stations
- Power Supply
- AC 120 V-, 60 Hz
- Power Consumption
- Operating: 635 W
Idle: 65 W
Standby: 0.1 W
- Dimensions (W x H x D)
- 17.12 x 6.8 x 14.94" (435 x 173.5 x 379.5mm)
- Weight
- 21.7 lbs (9.8kg)
|
Beautifully Brainy
The elegant design of the R-N803 is equally matched with powerful brainy internals - a full suite of modern technological and connectivity features make the receiver even more captivating and result in a receiver worthy to take home to your Wi-Fi and Hi-Fi.
Experience the Legend, Enjoy the Musicality
The legendary Yamaha Hi-Fi design concept ToP-ART (Total Purity Audio Reproduction Technology) combines a meticulously symmetrical left/right circuit layout and signal directness (straightest, shortest signal paths) with a low-vibration chassis of high rigidity. The chassis is equipped with the special resin frame "Art Base" that absorbs and blocks unnecessary vibration. The result is sonic purity and an accurate stereo image of your music.
High Precision, High Performance
The R-N803 uses the renowned SABRE 9006AS 192 kHz/24-bit DAC (from ESS technology) to deliver superior signal-to-noise ratio performance. Combined with the Yamaha original network module, the unit thoroughly draws out all the sonic merits of high-resolution sound sources, effectively reproducing even the subtle ambience of concert halls and delicate expressive nuances in the sound.
Optimized for the Ultimate
For the first time in a Hi-Fi receiver, the R-N803 is equipped with the Yamaha Parametric room Acoustic Optimizer (YPAO), a famed technology used in Yamaha AV receivers. It measures the shape of the room, the material of the wall and the position of the speaker, then automatically adjusts the sound to create the ideal response and sonic quality. The unit also features other advanced YPAO functions, including YPAO - Reflected Sound Control, which actively corrects the important early reflection sounds that greatly influence sound quality and YPAO Volume, which applies exceptionally high-precision EQ (equalization), with 192 kHz / 64-bit operation. The result? You can create an ideal listening environment right in your home, just like that of a professional audio listening room.
Sound Purity
Pure Direct mode enables the music signals to travel the shortest possible circuit route, bypassing the buffer amp and the tone, loudness and balance controls to virtually eliminate any signal degradation, for the purest sound quality.
Pure Delight to Own
This receiver inherits the simple and sophisticated design style for which Yamaha Hi-Fi audio is famous. Its elegant simplicity beautifully complements your other Hi-Fi audio components. The stylish design with high-quality materials deepens both the joy of ownership and the joy of listening.
Sophisticated Circuit Design
The power amp block adopts a symmetrical and direct circuit layout based on the ToP-ART concept, featuring a parallel push-pull structure using a total of eight bipolar-type power transistors (four each, on left and right) as its output terminals. And by minimizing the lengths of the audio signal paths in the circuit design, we've lowered impedance to achieve superb drive power with a maximum output of 145 watts (per channel).
Wireless
The R-N803 is equipped with Bluetooth to let you enjoy music playback from smartphones and other devices.
MusicCast
Access all of your music with a simple app and wirelessly stream it throughout your home using your existing Wi-Fi network.
Stream it all
Listen to Pandora, Spotify, Napster, SiriusXM Internet Radio, TIDAL, Deezer, thousands of free internet radio stations and the music stored on your smart devices and computers.
Wireless connectivity
All MusicCast products are fully loaded with Wi-Fi, Bluetooth and AirPlay.
Expand to a whole home audio experience
When you're ready, add MusicCast wireless speakers, sound bars or other devices in up to 9 other rooms and listen throughout your home.
No wires, easy installation
By using MusicCast, you don't need to fuss with placing wires through walls into other rooms.
Alexa on MusicCast
Amazon Alexa-enabled devices - including Echo, Dot, Tap and Show - can now control key functions of any MusicCast product using voice commands. Discover a new, exciting way to control music and entertainment experiences in your home.
Optical TV Input
The R-N803 is equipped for digital audio input with both audio and coaxial terminals. With an optical input, TV sound reaches new sonic platforms - pure, pristine and dynamic sound for all entertainment sources, from sports and other programs to movies and concerts.
Love for Vinyl
Throw your vinyl collection love and drop a needle with the phono input terminal that connects the R-N803 to a record player.
Discover New Favorites
Explore. Compatible with a large variety of popular streaming services, including Spotify, TIDAL, Deezer, Napster and others - the R-N803 encourages discovery of new music from all over the world.
- Beautiful and elegant front aluminum face with two channels of 145 W high-power output (0.019% THD)
- Phono input terminals for turntables and optical/coaxial audio inputs for TV
- Wireless Direct, Bluetooth, AirPlay and Wi-Fi to access to your music library, Pandora, Spotify, SiriusXM Internet Radio, TIDAL and Deezer
- YPAO - Yamaha's acoustic optimizer with Precision EQ, Volume and Reflected Sound Control
- Pure Direct and ToP-ART design to faithfully preserve the integrity of your music
- DSD 5.6 MHz, FLAC / WAV / AIFF 192 kHz / 24-bit, Apple Lossless 96 kHz / 24-bit playback
- Add audio in up to 9 additional rooms with MusicCast
- Voice control using your Alexa device like Echo or Echo Dot
- Network Section
- Wi-Fi with Wireless Direct
DLNA version 1.5 (DMR)
Apple AirPlay
Bluetooth version 2.1 + EDR, A2DP, AVRCP, SBC/AAC (receiving only)
- Supported File Formats
- MP3, WMA, MPEG4 AAC 48 kHz / 320 kbps, WAV, FLAC, AIFF 192 kHz / 24-bit, ALAC 96 kHz / 24-bit, DSD 2.8 / 5.6 MHz
- Minimum RMS Output Power
- 100W + 100W (8Ohms, 20 Hz-20 kHz, 0.019% THD)
- Maximum Power
- 160W + 160W (4Ohms, 1kHz, 0.7% THD, for Europe)
145W + 145W (8Ohms, 1 kHz, 10% THD)
- High Dynamic Power/Channel
- 140 / 170 / 220 / 290W (8/6/4/2Ohms)
- Frequency Response
- 0 +/- 0.5 dB / 0 +/- 1.0 dB
- Signal-to-Noise Ratio
- 100dB (Pure Direct on, 200mV) (CD)
- Damping Factor
- A Speakers, at 1 kHz: >=240 (8Ohms)
- Tuner Type
- AM/FM
- Audio In / Out
- 10/2
- Inputs
- 2x Optical TOSLINK
2x Digital coaxial
1x Stereo RCA phono with ground screw
4x Stereo RCA
1x USB (front)
- Outputs
- 2x Stereo RCA
1x 1/4" (6.35 mm) Headphone (front)
- Other Connectors
- 1x Ethernet LAN
1x FM antenna
1x AM antenna
1x Mono RCA subwoofer out
1x Trigger out
- Speaker Connectors
- 2 (L/R)
- FM 50dB Quieting Sensitivity
- 3 MuV (20.8 dBf) (IHF, 1 kHz, 100% Mod., Mono)
- FM Signal-to-Noise Ratio
- 69 dB/67 dB (Mono/Stereo)
- Pure Direct
- Yes
- ToP-ART
- Yes
- Standby Power Consumption
- 0.1W
Wired/Wi-Fi/Bluetooth, Network Standby On: 1.8W
Wireless Direct, Network Standby On: 1.9W
- Dimensions (WxHxD)
- 17.13 x 6 x 15.44" (43.51 x 15.24 x 39.22cm)
With antenna up: 17.13 x 8.5 x 15.44" (43.51 x 21.59 x 39.22cm)
- Weight
- 24.3 lbs (11.02kg)
|
High Strength Chassis Contributes to High Density Sound and Pure Audio Reproduction
In order to effectively dampen the vibrations that have adverse effects on sound quality, the A-S801 chassis has a double bottom design with a 1 mm iron plate. In addition, the power transformer and heat sinks in the power amp section are supported by an extremely strong and stable ART (Anti-Resonance and Tough) base. A solid center bar further enhances high rigidity and dampens vibrations. These Yamaha design innovations contribute to superior signal to noise ratio with rich, natural sound reproduction.
High Quality Parts for Outstanding Audio Performance
Notice a custom made power transformer, custom made block capacitors, two direct signal path speaker relays, one point grounding system, extruded aluminum heat sinks and other top quality parts to effortlessly handle demanding audio conditions. The quality of each individual part, as well as how they work together, basically determines the sound quality of this component. Yamaha uses only very high quality parts, carefully selected and tested for their sound properties.
Digital Audio Input for TV and/or Blu-ray Disc™ Player
The A-S801 is equipped for digital audio inputs with an optical and digital coaxial input terminal. The optical is for receiving audio from a TV and the coaxial for receiving audio from a Blu-ray Disc player. The audio stays in the digital domain giving you pure, pristine and dynamic sound for all your entertainment sources.
CD Direct Amplification and Pure Direct Mode for Greater Sound Purity
With a straight connection to the CD input, CD Direct Amplification maximizes the CD sources signal-to-noise ratio. Additionally, engaging the Pure Direct mode causes the music signals to travel the shortest possible circuit route, bypassing the buffer amp, the tone, loudness and balance controls to virtually eliminate any signal degradation for the purest sound quality.
Continuous Variable Loudness Control
The A-S801 also features a new analog loudness control on the front panel that uses electronic volume for higher sound quality which lets you adjust the loudness effect as desired. Separate from the overall volume, this controls the balance of the low and high frequencies providing full tonal range at any volume level by compensating for the natural loss in the human ear at soft levels.
Gold Plated Terminals
Gold plated terminals ensure a high quality connection that prevents signal loss. The A-S801 has gold plated speaker and input terminals.
Simple Yet Sophisticated Design
With a beautiful, simple and unique design inherited directly from Yamaha Hi-Fi audio components, this amplifier also boasts an easy to operate layout. The aluminum front panel has a richly textured silver hairline finish. The control knobs are also of the same luxurious construction as used on our top end models.
- Minimum RMS Output Power
- 8 Ohms:100 W + 100 W (0.019% THD)
6 Ohms: 120 W + 120 W (0.038% THD)
- High Dynamic Power/Channel
- 140 / 170 / 220 / 290 W at 8 / 6 / 4 / 2 Ohms
- Maximum power per channel
- 160 W
- EC power 1 kHz, 0.019% THD, 8 Ohms
- 115 W
- Power band width 0.04% THD, 50 W, 8 Ohms
- 10 Hz to 50 kHz
- Maximum effective output power
- 145 W
- Input sensitivity/Input impedance
- 3.0 mV/47 kOhmss
- Maximum input signal
- Phono(MM) (1 kHz, 0.03% THD): 45 mV or more
CD, etc. (1 kHz, 0.5% THD):2.2 V or more
- Output level/Output impedance
- REC OUT: 200 mV/1.0 kOhmss or less
SUBWOOFER OUT: 3.5 V/1.2 kOhmss
- PHONES jack rated output/Impedance
- 470 mV/470 Ohms
- Frequency response
- CD, etc. (20 Hz to 20 kHz): 0 +/- 0.5 dB
CD, etc. PURE DIRECT on (10 Hz to 100 kHz): 0 +/- 1.0 dB
- RIAA equalization deviation
- PHONO (MM): +/- 0.5 dB
- Total harmonic Phono (MM) to REC OUT
- (20 Hz to 20 kHz, 2.5 V): 0.03% or less
CD, etc. to SPEAKERS(20 Hz to 20 kHz, 50 W, 8 Ohms): 0.019% or less
- Signal to noise ratio (IHF-A network)
- PHONO (MM) (5 mV input shorted): 82 dB or more
CD, etc. PURE DIRECT on (200 mV input shorted): 99 dB or more
CD DIRECT AMP on: 104 dB or more
- Residual noise (IHF-A network)
- 40 uV
- Channel separation
- CD, etc. (5.1 kOhmss input shorted, 1 kHz): 65 dB or more
CD, etc. (5.1 kOhmss input shorted, 10 KHz): 50 dB or more
- Bass
- Boost/Cut (20 Hz): +/-10 dB
Turnover frequency: 400 Hz
- Treble
- Boost/Cut (20 kHz): +/-10 dB
Turnover frequency: 3.5 kHz
- Continuous loudness control
- Attenuation (1 kHz): -30 dB
- USB (Type B)
- Supported USB2.0
- Supported digital audio format
- PCM (2-ch): 192/176.4/96/88.2/48/44.1/32 kHz
- Supported digital audio format (USB)
- PCM (2-ch): 384/352.8/192/176.4/96/88.2/48/44.1 kHz
DSD: 2.8224/5.6448 MHz
- PCM word depth
- 32/24/16 bit
- Power supply
- AC 120 V, 60 Hz
- Damping Factor
- 240
- Total Harmonic Distortion (CD to Sp Out)
- 0.019% (50 W / 8 Ohms)
- Signal-to-Noise Ratio (CD)
- 99 dB (input shorted, 200 mV)
- Audio In / Out
- 8 / 2
- Digital Input
- Yes (optical / coaxial)
- USB Input
- Yes (type B)
- Subwoofer Out
- Yes
- DC out
- Yes
- Pure Direct
- Yes
- ToP-ART
- Yes
- Switchable CD Direct Amplification
- Yes
- Standby Power Consumption
- 0.5 W
- Power Management (Auto Power Standby)
- Yes
- Dimensions (W x H x D)
- 17.12 x 6 x 15.25" / 434.84 x 152.4 x 387.35mm
- Weight
- 26.7lbs / 12.11kg
|
Reviews
There are no reviews yet.