| Content |
Integrated Stereo Amplifier
Versatile pre-main amp refreshes your music life
Onkyo builds on the success of its A-9010 pre-main amp with the new A-9110 Integrated Stereo Amplifier, a component that refines an original amp design that's won an excellent critical and commercial reputation for dynamic, musical sound. Lively dynamics, deep bass, and layered detail emerge from warm and expressive tuning sure to please European ears.
WRAT delivers high-current power stability via large custom capacitors, while low-NFB amps capture the depth and spatiality of analog and hi-res recordings. Five RCA inputs including MM phono stage connect your sources while high-quality speaker-posts reveal Onkyo's hi-fi heritage and careful attention to detail. The A-9110 invites you into each album, the hours passing comfortably in pure analog sound.
Stable high-current power with wide-range amplifiers
Dynamic changes in music cause impedance to fluctuate. If power can't be delivered when impedance drops, sound quality suffers. Onkyo's solution is WRAT, specifically its high-output EI transformer, huge custom-made main audio capacitors, and carefully selected high-quality parts. High-current stability controls the speaker-drivers for accurate and assured reproduction of dynamic musical passages.
Further, the A-9110 features Onkyo's time-proven low-negative-feedback amplifier topology that distinguishes the timbral warmth, fullness, and vibrancy of the recording. This circuitry captures a wide frequency spectrum with uncommonly low distortion.
Sounds clearer at low volumes
When playing music at low volume, the signal normally drops close to the component's noise floor. The signal picks up noise, which is amplified, and the result is muffled sound.
To avoid this, the A-9110 features Optimum Gain Volume Circuitry, a volume circuit that requires less than half the usual amount of attenuation. The signal never approaches the noise floor, so you can enjoy clearest sound at low volume.
Phase Matching Bass Boost enriches sound at low volume
Most pre-main amps have a loudness button designed to boost low-mid frequency sound. However, conventional designs are prone to phase-shift, which degrades the clarity of the vocal frequency band.
Onkyo's Phase Matching Bass Boost function eliminates phase-shift between low- and mid-range frequency bands above 300 Hz.
Bass response is enhanced without compromising vocal clarity, and that's something especially useful when playing music at low volume where bass and high-frequency sounds are more difficult to hear.
Thick and rigid chassis tames resonance
Every hi-fi component generates electromechanical resonance. This translates into signal noise, and that impacts on the sound coming out of your speakers. To combat the negative effects of vibration, the A-9110 features a rigid metal chassis that's 1.3 times thicker than the A-9010 at 1.6 mm. Working together with large, wide-spaced insulators, unwanted resonance is virtually eliminated.
Direct Mode brings you closer to the source
Direct Mode bypasses tone and PM Bass circuitries. In combination with a refined amp circuit design, signal-path-lengths have been significantly reduced in comparison to the A-9010 for even more accurate and faithful sound.
Enjoy end-to-end analog music reproduction from turntable to speakers, and recapture the atmosphere of the original recording with any connected source.
New fine display shares info clearly
A new display panel boasts fine text resolution, making it easier to read at a distance than single bulbs. It shows active selected input at a glance.
Quality speaker-posts make perfect contact
Speaker cables with your choice of terminal are firmly secured by high-quality speaker binding posts. Each wide-spaced non-magnetic post prevents interference and features a large, easy-to-grip transparent knob.
- A-9110 Features:
- 50 W + 50 W high-current amplification
- WRAT (Wide Range Amplification Technology)
- Direct Mode for source-authentic audio reproduction
- Phase Matching Bass Boost
- High-current EI transformer, large custom audio capacitors, and discrete output stage
- New fine display for easy source selection
- Amplification Features:
- 50 W + 50 W (4 Ohm, 20 Hz-20 kHz, 0.9% THD, 2-ch driven, IEC)
- Optimum Gain Volume Circuitry for clear low-volume playback
- 4 Ohm speaker-driving capability
- Rigid anti-resonant 1.6 mm metal chassis
- Direct Mode for source-authentic audio reproduction
- Connection Features:
- 4x Analog RCA inputs
- 1x Phono input with discrete MM phono equalizer
- 1x Analog RCA line-level output
- Subwoofer pre-out
- Non-magnetic speaker posts with clear knobs
- 6.35 mm headphone jack
- RI (Remote Interactive) input
- Additional Features:
- Fine display shows active input
- Independent tone controls for bass and treble with balance control
- Easy-to-use controls for smooth operation without a remote
- RI (Remote Interactive) input enables connection of a supported component for integrated control with one remote controller
- Auto Power Standby
- Number of Channels
- 2
- Power Rating
- 50 W per channel @ 4 Ohms, 20 Hz to 20 kHz, 0.9% THD, 2-channels driven, FTC
- Speaker Impedance
- 4 to 16 Ohms
- Frequency Response
- 10 Hz to 100 kHz, +1, -3 dB (Direct Mode)
- Signal to Noise Ratio
- IHF-A, Line In, Speaker Out: 103 dB
IHF-A, Phono In, Speaker Out: 78 dB
- THD & Noise
- 0.05% @ 8 Ohms, 1 kHz, half power
- Damping Factor
- 95 (1 kHz, 8 Ohms)
- Tone Control
- Bass: +/-10 dB, 100 Hz
Treble: +/-10 dB, 10 kHz
- Input
- 5x stereo RCA pairs (1 phono with ground screw)
- Output
- 1x stereo RCA pair
1x RCA subwoofer pre-out
1x 1/4" (6.35mm) headphone (front)
- Speaker Connectors
- 2x gold-plated binding post pairs
- Other Connectors
- 1x 1/8" (3.5mm) Remote Interactive port
- Input Sensitivity/Impedance
- Line: 200 mV / 47 kOhms
Phono MM: 4 mV / 47 kOhms
- Output Level and Impedance
- Line Out: 0.2 V / 2.3 kOhms
Phono Overload: 70 mV (MM, 1 kHz, 0.5%)
- Power Requirements
- 120 VAC, 60 Hz
- Power Consumption
- Active: 140 W
Standby: Standby: 0.1 W
- Dimensions (W x H x D)
- 17.13 x 5.06 x 13" (435 x 129 x 330mm)
- Weight
- 15.4 lb (7kg)
|
Elite's brand-new universal disc player brings the spectacle of Ultra HD Blu-ray to your home entertainment, with four times the resolution of 1080p Full HD. Featuring three-block internal layout, Ultra Rigid Construction and Double-Layered Chassis for a robust build, 6-layered main circuit board, SDR/HDR preset mode and support for HDR10/Dolby Vision for quality picture, as well as premium audio DAC and Zero Signal Terminal for high-grade sound, the UDP-LX500 lets you enjoy the highest video resolution as well as your other digital disc collections.
Construction
• Three-Block Internal Layout (Power Supply, Drive/Digital Processing, Analog Audio)
• Ultra-Rigid Construction without Radiation Holes
• Double-Layered Chassis Reinforced with 3 mm Steel Plate for Rigidity and Low Center of Gravity
• 6-Layered Main Circuit Board for High S/N Ratio
• Rigid & Quiet UHD BD Drive
• Honeycomb Mechanism Drive Cover - Acoustic Damper Tray, Float-Mounting Structure
Video Features
• Ultra HD Blu-ray Playback
• SDR/HDR Preset Mode for Optimal Performance for the Display
• Video Adjust
• HDR10
• Dolby Vision (Low Latency Compatible)
• 36-bit Deep Color/"x.v.Color"
Audio Features
• Highly Precise D/A Conversion
• Direct Function for Pure Analog Audio Output
• Dual HDMI Output
• PQLS Jitter-less Sound Transmission via HDMI (with compatible AV Receiver)
Convenience
• Disc Information On-Screen Display
• BD-Live/BONUSVIEW
• Continued Viewing Playback
• 30 sec Skip Forward/10 sec Skip Back
• Auto Power Off
• Firmware Update (USB/Network)
• Self-Illuminating Remote Control
Ultra HD Blu-ray Playback
Certified by the UHD Alliance, the new Elite UDP-LX500 meets or exceeds strict performance specifications for resolution (4K - 4 times sharper than HD), high dynamic range (HDR - brilliant brights, deepest darks) and wide color spectrum (more lifelike colors). It also focuses on other video and audio attributes including immersive audio (multi-dimensional sound) among others. These performance advances guarantee the UDP-LX500 is able to fully replicate the richness of life's sights and sounds, enabling viewers to more accurately experience the content creator's vision.
Three-Block Internal Layout
The blocks for power supply, drive/digital processing and analog audio are separated into three to eliminate electrical and magnetic interference between the blocks.
Ultra-Rigid Construction without Radiation Holes
Even the holes for heat radiation are excluded to realize a flat form with optimal electric circuit design and minimum mechanical noise from the rotating system. The result is significantly low noise and even more rigid and stable chassis structure.
Double-Layered Chassis with Rigid Under Base for Rigidity and Low Center of Gravity
The 1.6 mm-thick chassis base is reinforced with a 3 mm-thick steel plate Rigid Under Base. This Double-Layered Chassis structure provides a low center-of-gravity and overall rigidity that prevents the transfer of external vibration to the inner chassis and offers a superior reading of the disc.
6-Layered Main Circuit Board for High S/N Ratio
A 6-layered IVH is used for the main circuit board to thoroughly eliminate digital noise. This optimizes the digital signal wiring and minimizes GND impedance and dramatically improves S/N ratio in audio/video signal processing. The 18 Gbps transmission through the latest HDMI standard becomes even more precise.
SDR/HDR Preset Mode for Optimal Performance for the Display
In addition to the video parameter "Reference" for reproducing the original master quality, you can select "LCD TV," "OLED TV," or "Projector" for the video quality best suited to your display. Additionally, there are SDR/HDR presets for each video parameter, that automatically switches between SDR preset and HDR preset according to the output signal.
Disc Information On-Screen Display
You can display the disc information on your screen by pressing and holding the remote control's DISPLAY button. In addition to the playing disc's details, you can easily check mastering information such as MaxFALL (Maximum Frame Average Light Level) and MaxCLL (Maximum Content Light Level) available on some HDR content, as well as HDMI output information .
PQLS Jitter-less Sound Transmission
With the precision quartz controller on a compatible AV receiver, Pioneer's PQLS (Precision Quartz Lock System) eliminates distortion caused by timing errors. It controls the amount of audio signals from the AV receiver to the UDP-LX500, giving the best possible digital-to-analog conversion. UDP-LX500 supports PQLS 2ch Audio, Multi-Surround and Bit-stream.
Zero Signal Terminal
The Zero Signal Terminal is a Pioneer-original feature dedicated to tuning audio and video quality without signal transmission. By connecting the Zero Signal Terminal with the audio/video input terminal of an AV receiver etc., the reference level (GND) of the audio/video signals is aligned between the two devices and the potential difference is suppressed, allowing a precise and high-quality signal transmission.
- Ultra HD Blu-ray Playback
- Three-Block Internal Layout (Power Supply, Drive/Digital Processing, Analog Audio)
- 6-Layered Main Circuit Board for High S/N Ratio
- PQLS Jitter-less Sound Transmission
- System
- NTSC
- Region
- Blu-ray: A
DVD: 1
- HDR Compatibility
- HDR10, Dolby Vision
- HD Upconversion
- No
- Video
- Ultra HD Blu-ray, 3D Blu-ray, BD-R, BD-R DL, BD-RE, BD-RE DL, BD-ROM, DVD+R, DVD+R DL, DVD+RW, DVD-Audio, DVD-R, DVD-R DL, DVD-ROM, DVD-RW, DVD-Video
- Audio
- CD-DA, CD-R, CD-ROM, CD-RW, SACD
- Output Ports
- 1x HDMI Type A
1x RCA (Analog Audio)
1x RCA (Digital Audio)
- Input Ports
- No
- USB Ports
- 2x USB Type-A
- Ethernet
- Yes
- Wi-Fi
- No
- Bluetooth
- No
- Control
- RS-232C
- Digital Media Slot
- No
- BD-Live
- Yes
- BONUSVIEW
- Yes
- Playback Media
- BD-ROM (UHDBD/3D BD/BD)/BD-R (DL)/BD-R LTH/BD-RE (DL)
DVD-ROM (DVD-Video/DVD-Audio)/DVD-R (DL)/DVD-RW/DVD+R (DL)/ DVD+RW
Audio CD (CD-DA/SACD)/CD-ROM/CD-R/CD-RW
USB Memory/HDD
- Terminals
- HDMI 2 Out (1 Main for Audio/Video, 1 Sub for Audio)
Digital Coaxial Out
Digital Optical Out
USB 2 In (1 Front, 1 Rear)
Ethernet
RS-232C
Analog Audio Out (Unbalanced)
Zero Signal Terminal (for Audio/Video Quality Tuning)
- AC Input Power
- 120 VAC, 60 Hz
- Power Consumption
- 28 W (Typical)
1.2 W (Idle)
0.4 W (Standby)
- ENERGY STAR Compliant
- No
- Dimensions (WxHxD)
- 17.13 x 4.63 x 13.25" (43.51 x 11.76 x 33.66cm)
- Weight
- 22.7 lbs (10.30kg)
|
High Strength Chassis Contributes to High Density Sound and Pure Audio Reproduction
In order to effectively dampen the vibrations that have adverse effects on sound quality, the A-S801 chassis has a double bottom design with a 1 mm iron plate. In addition, the power transformer and heat sinks in the power amp section are supported by an extremely strong and stable ART (Anti-Resonance and Tough) base. A solid center bar further enhances high rigidity and dampens vibrations. These Yamaha design innovations contribute to superior signal to noise ratio with rich, natural sound reproduction.
High Quality Parts for Outstanding Audio Performance
Notice a custom made power transformer, custom made block capacitors, two direct signal path speaker relays, one point grounding system, extruded aluminum heat sinks and other top quality parts to effortlessly handle demanding audio conditions. The quality of each individual part, as well as how they work together, basically determines the sound quality of this component. Yamaha uses only very high quality parts, carefully selected and tested for their sound properties.
Digital Audio Input for TV and/or Blu-ray Disc™ Player
The A-S801 is equipped for digital audio inputs with an optical and digital coaxial input terminal. The optical is for receiving audio from a TV and the coaxial for receiving audio from a Blu-ray Disc player. The audio stays in the digital domain giving you pure, pristine and dynamic sound for all your entertainment sources.
CD Direct Amplification and Pure Direct Mode for Greater Sound Purity
With a straight connection to the CD input, CD Direct Amplification maximizes the CD sources signal-to-noise ratio. Additionally, engaging the Pure Direct mode causes the music signals to travel the shortest possible circuit route, bypassing the buffer amp, the tone, loudness and balance controls to virtually eliminate any signal degradation for the purest sound quality.
Continuous Variable Loudness Control
The A-S801 also features a new analog loudness control on the front panel that uses electronic volume for higher sound quality which lets you adjust the loudness effect as desired. Separate from the overall volume, this controls the balance of the low and high frequencies providing full tonal range at any volume level by compensating for the natural loss in the human ear at soft levels.
Gold Plated Terminals
Gold plated terminals ensure a high quality connection that prevents signal loss. The A-S801 has gold plated speaker and input terminals.
Simple Yet Sophisticated Design
With a beautiful, simple and unique design inherited directly from Yamaha Hi-Fi audio components, this amplifier also boasts an easy to operate layout. The aluminum front panel has a richly textured silver hairline finish. The control knobs are also of the same luxurious construction as used on our top end models.
- Minimum RMS Output Power
- 8 Ohms:100 W + 100 W (0.019% THD)
6 Ohms: 120 W + 120 W (0.038% THD)
- High Dynamic Power/Channel
- 140 / 170 / 220 / 290 W at 8 / 6 / 4 / 2 Ohms
- Maximum power per channel
- 160 W
- EC power 1 kHz, 0.019% THD, 8 Ohms
- 115 W
- Power band width 0.04% THD, 50 W, 8 Ohms
- 10 Hz to 50 kHz
- Maximum effective output power
- 145 W
- Input sensitivity/Input impedance
- 3.0 mV/47 kOhmss
- Maximum input signal
- Phono(MM) (1 kHz, 0.03% THD): 45 mV or more
CD, etc. (1 kHz, 0.5% THD):2.2 V or more
- Output level/Output impedance
- REC OUT: 200 mV/1.0 kOhmss or less
SUBWOOFER OUT: 3.5 V/1.2 kOhmss
- PHONES jack rated output/Impedance
- 470 mV/470 Ohms
- Frequency response
- CD, etc. (20 Hz to 20 kHz): 0 +/- 0.5 dB
CD, etc. PURE DIRECT on (10 Hz to 100 kHz): 0 +/- 1.0 dB
- RIAA equalization deviation
- PHONO (MM): +/- 0.5 dB
- Total harmonic Phono (MM) to REC OUT
- (20 Hz to 20 kHz, 2.5 V): 0.03% or less
CD, etc. to SPEAKERS(20 Hz to 20 kHz, 50 W, 8 Ohms): 0.019% or less
- Signal to noise ratio (IHF-A network)
- PHONO (MM) (5 mV input shorted): 82 dB or more
CD, etc. PURE DIRECT on (200 mV input shorted): 99 dB or more
CD DIRECT AMP on: 104 dB or more
- Residual noise (IHF-A network)
- 40 uV
- Channel separation
- CD, etc. (5.1 kOhmss input shorted, 1 kHz): 65 dB or more
CD, etc. (5.1 kOhmss input shorted, 10 KHz): 50 dB or more
- Bass
- Boost/Cut (20 Hz): +/-10 dB
Turnover frequency: 400 Hz
- Treble
- Boost/Cut (20 kHz): +/-10 dB
Turnover frequency: 3.5 kHz
- Continuous loudness control
- Attenuation (1 kHz): -30 dB
- USB (Type B)
- Supported USB2.0
- Supported digital audio format
- PCM (2-ch): 192/176.4/96/88.2/48/44.1/32 kHz
- Supported digital audio format (USB)
- PCM (2-ch): 384/352.8/192/176.4/96/88.2/48/44.1 kHz
DSD: 2.8224/5.6448 MHz
- PCM word depth
- 32/24/16 bit
- Power supply
- AC 120 V, 60 Hz
- Damping Factor
- 240
- Total Harmonic Distortion (CD to Sp Out)
- 0.019% (50 W / 8 Ohms)
- Signal-to-Noise Ratio (CD)
- 99 dB (input shorted, 200 mV)
- Audio In / Out
- 8 / 2
- Digital Input
- Yes (optical / coaxial)
- USB Input
- Yes (type B)
- Subwoofer Out
- Yes
- DC out
- Yes
- Pure Direct
- Yes
- ToP-ART
- Yes
- Switchable CD Direct Amplification
- Yes
- Standby Power Consumption
- 0.5 W
- Power Management (Auto Power Standby)
- Yes
- Dimensions (W x H x D)
- 17.12 x 6 x 15.25" / 434.84 x 152.4 x 387.35mm
- Weight
- 26.7lbs / 12.11kg
|
Beautifully Brainy
The elegant design of the R-N803 is equally matched with powerful brainy internals - a full suite of modern technological and connectivity features make the receiver even more captivating and result in a receiver worthy to take home to your Wi-Fi and Hi-Fi.
Experience the Legend, Enjoy the Musicality
The legendary Yamaha Hi-Fi design concept ToP-ART (Total Purity Audio Reproduction Technology) combines a meticulously symmetrical left/right circuit layout and signal directness (straightest, shortest signal paths) with a low-vibration chassis of high rigidity. The chassis is equipped with the special resin frame "Art Base" that absorbs and blocks unnecessary vibration. The result is sonic purity and an accurate stereo image of your music.
High Precision, High Performance
The R-N803 uses the renowned SABRE 9006AS 192 kHz/24-bit DAC (from ESS technology) to deliver superior signal-to-noise ratio performance. Combined with the Yamaha original network module, the unit thoroughly draws out all the sonic merits of high-resolution sound sources, effectively reproducing even the subtle ambience of concert halls and delicate expressive nuances in the sound.
Optimized for the Ultimate
For the first time in a Hi-Fi receiver, the R-N803 is equipped with the Yamaha Parametric room Acoustic Optimizer (YPAO), a famed technology used in Yamaha AV receivers. It measures the shape of the room, the material of the wall and the position of the speaker, then automatically adjusts the sound to create the ideal response and sonic quality. The unit also features other advanced YPAO functions, including YPAO - Reflected Sound Control, which actively corrects the important early reflection sounds that greatly influence sound quality and YPAO Volume, which applies exceptionally high-precision EQ (equalization), with 192 kHz / 64-bit operation. The result? You can create an ideal listening environment right in your home, just like that of a professional audio listening room.
Sound Purity
Pure Direct mode enables the music signals to travel the shortest possible circuit route, bypassing the buffer amp and the tone, loudness and balance controls to virtually eliminate any signal degradation, for the purest sound quality.
Pure Delight to Own
This receiver inherits the simple and sophisticated design style for which Yamaha Hi-Fi audio is famous. Its elegant simplicity beautifully complements your other Hi-Fi audio components. The stylish design with high-quality materials deepens both the joy of ownership and the joy of listening.
Sophisticated Circuit Design
The power amp block adopts a symmetrical and direct circuit layout based on the ToP-ART concept, featuring a parallel push-pull structure using a total of eight bipolar-type power transistors (four each, on left and right) as its output terminals. And by minimizing the lengths of the audio signal paths in the circuit design, we've lowered impedance to achieve superb drive power with a maximum output of 145 watts (per channel).
Wireless
The R-N803 is equipped with Bluetooth to let you enjoy music playback from smartphones and other devices.
MusicCast
Access all of your music with a simple app and wirelessly stream it throughout your home using your existing Wi-Fi network.
Stream it all
Listen to Pandora, Spotify, Napster, SiriusXM Internet Radio, TIDAL, Deezer, thousands of free internet radio stations and the music stored on your smart devices and computers.
Wireless connectivity
All MusicCast products are fully loaded with Wi-Fi, Bluetooth and AirPlay.
Expand to a whole home audio experience
When you're ready, add MusicCast wireless speakers, sound bars or other devices in up to 9 other rooms and listen throughout your home.
No wires, easy installation
By using MusicCast, you don't need to fuss with placing wires through walls into other rooms.
Alexa on MusicCast
Amazon Alexa-enabled devices - including Echo, Dot, Tap and Show - can now control key functions of any MusicCast product using voice commands. Discover a new, exciting way to control music and entertainment experiences in your home.
Optical TV Input
The R-N803 is equipped for digital audio input with both audio and coaxial terminals. With an optical input, TV sound reaches new sonic platforms - pure, pristine and dynamic sound for all entertainment sources, from sports and other programs to movies and concerts.
Love for Vinyl
Throw your vinyl collection love and drop a needle with the phono input terminal that connects the R-N803 to a record player.
Discover New Favorites
Explore. Compatible with a large variety of popular streaming services, including Spotify, TIDAL, Deezer, Napster and others - the R-N803 encourages discovery of new music from all over the world.
- Beautiful and elegant front aluminum face with two channels of 145 W high-power output (0.019% THD)
- Phono input terminals for turntables and optical/coaxial audio inputs for TV
- Wireless Direct, Bluetooth, AirPlay and Wi-Fi to access to your music library, Pandora, Spotify, SiriusXM Internet Radio, TIDAL and Deezer
- YPAO - Yamaha's acoustic optimizer with Precision EQ, Volume and Reflected Sound Control
- Pure Direct and ToP-ART design to faithfully preserve the integrity of your music
- DSD 5.6 MHz, FLAC / WAV / AIFF 192 kHz / 24-bit, Apple Lossless 96 kHz / 24-bit playback
- Add audio in up to 9 additional rooms with MusicCast
- Voice control using your Alexa device like Echo or Echo Dot
- Network Section
- Wi-Fi with Wireless Direct
DLNA version 1.5 (DMR)
Apple AirPlay
Bluetooth version 2.1 + EDR, A2DP, AVRCP, SBC/AAC (receiving only)
- Supported File Formats
- MP3, WMA, MPEG4 AAC 48 kHz / 320 kbps, WAV, FLAC, AIFF 192 kHz / 24-bit, ALAC 96 kHz / 24-bit, DSD 2.8 / 5.6 MHz
- Minimum RMS Output Power
- 100W + 100W (8Ohms, 20 Hz-20 kHz, 0.019% THD)
- Maximum Power
- 160W + 160W (4Ohms, 1kHz, 0.7% THD, for Europe)
145W + 145W (8Ohms, 1 kHz, 10% THD)
- High Dynamic Power/Channel
- 140 / 170 / 220 / 290W (8/6/4/2Ohms)
- Frequency Response
- 0 +/- 0.5 dB / 0 +/- 1.0 dB
- Signal-to-Noise Ratio
- 100dB (Pure Direct on, 200mV) (CD)
- Damping Factor
- A Speakers, at 1 kHz: >=240 (8Ohms)
- Tuner Type
- AM/FM
- Audio In / Out
- 10/2
- Inputs
- 2x Optical TOSLINK
2x Digital coaxial
1x Stereo RCA phono with ground screw
4x Stereo RCA
1x USB (front)
- Outputs
- 2x Stereo RCA
1x 1/4" (6.35 mm) Headphone (front)
- Other Connectors
- 1x Ethernet LAN
1x FM antenna
1x AM antenna
1x Mono RCA subwoofer out
1x Trigger out
- Speaker Connectors
- 2 (L/R)
- FM 50dB Quieting Sensitivity
- 3 MuV (20.8 dBf) (IHF, 1 kHz, 100% Mod., Mono)
- FM Signal-to-Noise Ratio
- 69 dB/67 dB (Mono/Stereo)
- Pure Direct
- Yes
- ToP-ART
- Yes
- Standby Power Consumption
- 0.1W
Wired/Wi-Fi/Bluetooth, Network Standby On: 1.8W
Wireless Direct, Network Standby On: 1.9W
- Dimensions (WxHxD)
- 17.13 x 6 x 15.44" (43.51 x 15.24 x 39.22cm)
With antenna up: 17.13 x 8.5 x 15.44" (43.51 x 21.59 x 39.22cm)
- Weight
- 24.3 lbs (11.02kg)
|
Immerse in 3D surround sound of Dolby Atmos or DTS:X, or you can still enjoy similar effects by Dolby Atmos Height Virtualizer and DTS Virtual:X even without height or surround speakers. Featuring Ultra HD, HDR10, HLG, and Dolby Vision pass through with support for HDCP 2.2., the VSX-934 offers evermore life-like images. You can stream songs from various sources via Wi-Fi, Bluetooth, DTS Play-Fi, SONOS system, and Apple AirPlay 2. Other highlights include a Powered Zone 2 feature with a dedicated DAC, Personal Preset buttons, and 2 HDMI outputs.
HDMI 2.1 with 8K
HDMI 2.1 is the most recent update of the HDMI spec and supports a range of higher video resolutions and refresh rates including 8K60 and 4K120, as well as Dynamic HDR formats. 8K delivers a super-immersive viewing experience with 2x the horizontal and vertical resolution of 4K, and 4 times as many pixels; and combined with 60Hz refresh rate enables smooth and sharp viewing of content with high-speed action. HDMI 2.1 with 8K ensures your system is ready for the clearest and cleanest picture available both now and down the road.
Enhanced Gaming
Own your opponents with HDMI 2.1 enhancements for gamers: 4K/120Hz HDR pass-through enables ultra-fast motion -VRR (Variable Refresh Rate) eliminates lag, stutter, and frame-tearing for fluid gameplay. - ALLM (Auto Low Latency Mode) optimizes latency from source to screen - QFT (Quick Frame Transport) limits lag for a smoother experience.
Immersive Sound from your TV Apps
E-ARC (Enhanced Audio Return Channel) simplifies connectivity and supports the latest high-bitrate audio formats including Dolby Atmos, DTS-HD Master Audio, DTS:X, Dolby TrueHD.
Streaming Music Services and Faster Wifi
Use Works with Sonos, Chromecast built-in, AirPlay 2, and DTS Play-Fi; includes Spotify, Amazon Music, Pandora, TIDAL, Deezer, or TuneIn streaming services.
Voice interaction at the touch of a button
Stay wirelessly connected to phone conversations and smart assistants by voice. Simple buttons on the bodies activate a mic so you can make and receive calls. Or ask Siri or the Google Assistant for help without reaching for your phone.
Dolby Atmos Height Virtualization
Creating a virtual surround and height effect from traditional speaker layouts without employing additional surround or height speakers.
Advanced MCACC Auto Room Tuning featuring Auto Phase Control Plus
Advanced MCACC adjusts the sound according to the listening room and speakers, and also creates clearer sound by suppressing the standing waves that occur between walls or ceiling and floor. Measurement of up to nine positions can be saved for a wide listening area. Auto Phase Control Plus makes real-time analysis of the phase difference, and automatically compensates the gap between the LFE and main signals, providing strong bass and clear high-frequency sound.
Roon-Tested
Roon plays to thousands of USB, Airplay, and Chromecast devices, but Roon-tested devices are profiled by the Roon team to ensure simple setup and effortless daily use. If you own a Roon-Tested device, you can have the confidence that you will enjoy the best possible experience with it.
- Pioneer has packed the VSX-935 with three independent 2.1 inputs (40Gbps 8K/60Hz, 4K/120Hz)
- Immersive sound capabilities via Dolby Atmos, DTS:X, and associated upmixers
- 11 different advanced surround listening modes
- Mid-range AV receiver with 7 channels of audio output
- Audio streaming options include Bluetooth, DTS Play-Fi with Critical Listening Mode, Chromecast built-in, AirPlay 2, Works with Sonos, and Room Tested
- Built-in support for services such as Spotify, TIDAL, Deezer, and Pandora, all of which can be accessed through the free Pioneer Music Control App
- The onboard Direct Energy Class AB amplifier is factory specified to deliver a peppy 80 watts per channel (20Hz-20kHz, 8 ohms, 2ch)
- 6 HDMI inputs and two outputs
- Access to Ethernet, rear USB, digital coax and optical, dual subwoofer pre-outs, four sets of RCA inputs, and a moving magnet phono input
- Power handling capability of 170rms per channel fills even the largest room with resonating theatre sound
- Ultra HD, HDR10, HLG, and Dolby Vision pass through display vivid images while the HDMI 2.1 combined with HDCP 2.3 increases the bandwidth to give high resolution output
- Variable Refresh Rate (VRR) removes the lag by increasing the image refreshing rate, so you can indulge in thrilling games and emotional videos without any stutter
- Auto Low Latency Mode (ALLM) and Quick Frame Transport (QFT)allows quick switching to the optimized mode to assure remarkable performance with no lag
- Dolby Atmos Height Virtualize optimizes the sound with more virtual surround and height effect without using additional speakers
- DTS Neural:X discards the need for a new speaker layout and auto tunes the audio to adapt to the existing channel and speaker system
- Compatibility with Alexa and Google Assistant ensure easy control over music services and internet radio
- Amplifier Design
- Direct Energy
- Power Output: Watts per Channel
- 80 W/ch (8 ohms, 20 Hz-20 kHz, THD 0.08 %, 2ch Driven, FTC), 170 W/ch (6 ohms, 1 kHz, THD 10 %, 1ch Driven)
- Power Output: Watts per Channel
- 80 W/ch (8 ohms, 20 Hz-20 kHz, THD 0.08 %, 2ch Driven, FTC), 170 W/ch (6 ohms, 1 kHz, THD 10 %, 1ch Driven)
- Channels
- 7.2
- Dolby Atmos, Dolby Surround Upmixer
- Yes
- DTS:X, DTS Neural:X Upmixer
- Yes
- Reflex Optimizer
- Yes
- Dolby Atmos Height Virtualizer
- Yes
- DTS Virtual: X
- Yes
- Dolby TrueHD, Dolby Digital Plus
- Yes
- Audio
- DTS-HD Master Audio, DTS-HD High Resolution Audio, DTS 96/24, DTS-ES, DTS-HD Express: Yes
- DSD Disc (SACD) Playback
- Yes, via HDMI (2.8 MHz/2ch, 5.1ch)
- Digital Quad-Core 32-bit DSP
- Yes (Cirrus Logic)
- 192 kHz/24-bit D/A Conversion for
- Yes (Hi-Res Audio)
- Enhanced Audio Return Channel (eARC)
- Yes, on HDMI Out (Main)
- Advanced Sound Retriever (2ch)
- Yes
- Advanced Surround Modes
- Classical, Unplugged, Entertainment Show, Drama, Advanced Game, Action, Rock/Pop, Sports, Extended Stereo, Mono Music, Front Stage Surround Advance
- Support HDMI 2.1
- (HDMI IN 1-3) with 8K, VRR (Variable Refresh Rate), ALLM (Auto Low Latency Mode), QFT (Quick Frame transport), DSC (Display Stream Compression), and QMS (Quick Media Switching) pass-through
- Supports HDR10+, HDR10, and HLG
- 8K/60p (4:2:0/10-bit), 8K/30p (4:4:4/10-bit, 4:2:2/12-bit), 4K/120p (4:4:4/10-bit, 4:2:2/12-bit), 4K60p (4:4:4/12-bit) and BT.2020 color; Deep Color (36-bit), "x.v.Color", LipSync, and HDCP 2.3
- Dolby Vision Compatible
- Yes
- Ultra HD Upscaling
- 4K to 8K, 1080p to 8K/4K
- Works with
- Alexa supporting multi-room music: Yes
Hey Google and Chromecast built-in: Yes
SONOS supporting multiple Sonos Connect control and Volume Pass Through mode: Yes
- DTS Play-Fi w/Pioneer Music Control App
- DTS Play-Fi supporting Critical Listening mode with Pioneer Music Control App: Yes
- Apple AirPlay 2 with Siri Voice Control
- Yes
- Music-Streaming Services Ready
- Amazon Music HD, Pandora, Spotify, TIDAL, and Deezer Hi-Fi: Yes
- Internet Radio with TuneIn
- Yes
- Hi-Res Audio File Playback
- Yes (via USB/Network)
- Up to 192 kHz/24-bit ALAC5
- Yes (AIFF, FLAC, WAV (RIFF) and 5.6 MHz DSD)
- Personal Preset
- Yes
- Dialog Enhancement
- Yes
- Dual Band (5 GHz/2.4 GHz) Wi-Fi Built-in
- Yes
- Bluetooth Wireless Technology
- Version: 4.2, Profile: A2DP 1.2/AVRCP 1.3, Codec: SBC/aptX/aptX HD (TX), SBC/AAC (RX) Built-in
- Pioneer Remote App
- Ready for Multi-room Entertainment Control and Network Streaming
- User-Friendly GUI with System Setup Menu
- Yes
- On-Screen Information for
- Yes (Audio, Video and Network)
- Web Setup
- Yes
- Auto Power Off in HDMI Standby Through
- Yes
- FM/AM Tuner 40 Presets
- Yes
- User-Friendly Simple Remote Control
- Yes
- USB 1 In for USB Drive
- Yes
- MCACC Setup MIC In
- Yes
- Audio 1 In (Mini Stereo Jack)
- Yes
- Phones 1 Out
- Yes
- 4K Ultra HD Pass-Through
- Yes (HDR10, HLG and BT.2020 Wide Color Gamut Signal Pass-through)
- 3-D Ready
- Yes
- HDMI Standby Through
- Yes with Input Switch / Last Memory
- HDMI 36-bit Deep Color
- Yes
- 4K Ultra HD Video Scaler
- Ultra HD Upscaling
- Audio Return Channel
- Yes
- Dolby Vision Compatible
- Yes
- HDMI x.v. Color
- Yes
- Video Converter to HDMI
- Yes
- Super Resolution
- Yes
- HDMI Input / Output
- 6 In (Rear) / 2 Out
- Wi-Fi Built-In
- Dual Band (5 GHz/2.4 GHz) Wi-Fi Built-in
- Digital Audio Inputs / Output
- 2 In (Optical 1, Coaxial 1)
- Headphone Output
- Yes
- AM/FM Presets
- AM/FM Tuner 40 Presets
- Bluetooth Built-In
- Yes (Version: 4.2 + LE, Profile: A2DP 1.2/AVRCP 1.3, Codec: SBC/AAC)
- USB Terminal
- Front and Rear
- Analog Audio Inputs / Output
- 2 in / 0 out
- Pre-Amp Output
- 0.2 ch.
- Front A/V Inputs
- USB / 3.5mm stereo mini jack
- On-Screen Display
- User-Friendly GUI with System Setup Menu
- Multi-Room and Source Output
- Powered Zone 2 with Dedicated DAC
- Sleep Timer
- Yes
- Auto Power Down
- Yes
- Remote
- Yes
- Versatile Speaker Configuration
- Speaker 9ch Out (FRONT, CENTER,SURROUND, SURROUND BACK/HEIGHT/Bi-AMP, ZONE 2)
- Front Panel
- Brushed
- Speaker Terminals
- 9 large
- Dimensions (W x H x D)
- 17.13 x 6.81 x 14.61" (435.10 x 172.97 x 371.09mm)
- Weight
- 20.7 lbs (9.38kg)
|
AVENTAGE RX-A2A 7.2-channel AV Receiver with MusicCast
Take your entertainment to the next level. With professional quality video and immersive surround sound via Dolby Atmos, the RX-A2A will completely transform home cinema.
Breathtaking Sound
• Dolby AtmosDolby Atmos
• Dolby AtmosDolby Atmos with Height Virtualization
• DTS:XDTS:X
• High Slew Rate AmplifierHigh Amplifier
• Compressed Music Enhancer Compressed Enhancer
• MusicCast multi-room audioMusicCast audio
• Wi-Fi, AirPlay 2, 2 and Spotify Connect
• Streaming services include Spotify, Amazon Music, PandoraPandora, TIDAL, Deezer, Qobuz, Napster and SiriusXM, SiriusXM
• Zone 2
• Phono input
Movies and Games Like Never Before
• 4K60 Ultra HD with HDR, Dolby Vision, Hybrid-Log Gamma and BT.2020
• (7) HDMI inputs with HDCP 2.3 and eARC
• With future updates for HDMI 2.1, including: HDR 10+, 8K60B, 4K120AB and enhanced gaming features (ALLM, VRR, QMS, QFT)
Simple to Set Up, Simple To Use
• AV Setup Guide app
• MusicCast app
• Voice control with Alexa and Google Assistant devices; works with Siri via AirPlay 2
Designed For Your Space
• YPAO R.S.C. with multipoint
• Wireless rear surround capability
• Sleek, modern design
Dolby Atmos with Height Virtualization
Feel every dimension in Dolby Atmos. For those without in-ceiling or upward firing speakers in their systems, this height virtualization technology simulates the Atmos experience with forward-facing drivers.
DTS:X
DTS:X immersive audio formatting places sound where it would naturally occur in space, creating life-like, multi-dimensional audio. The included spatial remapping engine of DTS Neural:X offers improved immersion and heightened realism in all your favorite movies.
Anti-Resonance Technology Wedge
The Anti-Resonance Technology (A.R.T.) Wedge is a fifth foot in the center of the chassis unit base. It dampens vibrations from the power transformer, power transistors and heat sinks, as well as vibrations that might be caused by the sound from the speakers - providing dynamic sound and focused, accurate reproduction.
Cinema DSP 3D
This unique Yamaha proprietary sound field creation technology was created by combining measured sound field data with digital signal processing. By digitizing this vast trove of information and incorporating it into dedicated LSI devices, it effectively reproduces the spaces of concert halls and music clubs in your home. Immerse yourself in the astounding realism of your favorite movies and shows.
Movies and Games Like Never Before
8K60B, 4K120AB and 4K60
This receiver supports end-to-end 8K/4K resolutions and higher refresh rates, giving you a smoother and more realistic viewing experience.
HDR10+ and Dolby Vision
The latest enhancement for HDR provides deeper contrast and more realistic images that stay true to the creators' intent. Support for Dolby Vision, Hybid-Log Gamma and BT.2020 included.
Enhanced Media and Gaming Features (ALLM, VRR, QFT and QMS)
New enhanced gaming/media features offer seamless motion and transitions to enhance your performance.
Future Support for Multiple HDMI Inputs
Multiple HDMI inputs will equally support the latest HDMI technology to allow next-gen gaming consoles to be connected at the same time.
Simple to Set Up, Simple to Use
MusicCast App
Explore the power of multi-room audio, access your sources and streaming devices, and control your AV receiver, all through your phone or tablet.
Voice Control
Works with Alexa and Google Assistant, so your AV receiver is always at your command. Through AirPlay 2, you can stream your music via voice control with Siri from an Apple iOS device.
AV Setup Guide App
Offers expert guidance through installation, cable connections, and various other settings. Includes web setup for CI.
Designed For Your Space
Compatible with Wireless Surround Sound
Go wire-free with MusicCast Surround, letting you create a 5.1-channel surround sound system without the need to run wires to the back of the room. Connect wirelessly by connecting one MusicCast 50 or two MusicCast 20 wireless speakers to this AV receiver.
YPAO R.S.C. with Multipoint
YPAO (Yamaha Parametric Room Acoustic Optimizer) analyzes your room acoustics and measures speaker characteristics to optimize every channel of your home theater. R.S.C. (Reflected Sound Control) also optimizes sound parameters for maximum performance from CINEMA DSP, Dolby Atmos and DTS:X.
Dynamic and Compelling
Classic Yamaha craftsmanship meets cutting-edge design. Every piece has been carefully crafted to ensure this AV receiver looks and sounds perfect in your home.
- Breathtaking Sound
- Movies and Games Like Never Before
- Simple to Set Up, Simple To Use
- Designed For Your Space
- Dolby Atmos with Height Virtualization
- DTS:X
- Anti-Resonance Technology Wedge
- Cinema DSP 3D
- 8K60B, 4K120AB and 4K60
- HDR10+ and Dolby Vision
- Enhanced Media and Gaming Features (ALLM, VRR, QFT and QMS)
- Future Support for Multiple HDMI Inputs
- MusicCast App
- Voice Control
- AV Setup Guide App
- Compatible with Wireless Surround Sound
- YPAO R.S.C. with Multipoint
- Dynamic and Compelling
- Channel
- 7.2
- Rated Output Power
- 100 W (8 ohms, 0.06% THD) (20Hz-20kHz, 2-ch driven)
- High Slew Rate Amplifier
- Yes
- HDMI with eARC
- Yes
- HDR10, Dolby Vision
- Yes (via future update)
- Hybrid-Log Gamma and BT.2020, HDR10+
- Yes (via future update)
- MusicCast Surround
- Yes
- HDMI Input/Output (total)
- 7/1
- HDMI 4K60/4K120AB/8K60B support
- 3 / 1 (via future update)
- HDMI CEC
- Yes
- USB Input
- Yes
- Network Port
- Yes
- Wi-Fi
- Yes (2.4 / 5 GHz)
- AirPlay 2
- Yes
- Bluetooth
- Yes (SBC / AAC)
- Front Input
- USB
- Digital Audio Input/Output
- Optical: 1 / 0
Coaxial: 1 / 0
- IR In/Out
- 1/1
- Analog Audio Input/Output
- 4/0
- Zone 2
- Yes
- Phono Input
- Yes
- Preout
- 2.2-ch
- Headphone Output
- 1
- Standby Power Consumption (IR only)
- 0.1 W
- Auto Power Standby
- Yes
- ECO mode
- Yes
- Dimensions (W x H x D)
- 17.125 x 6.75 x 14.6" (43 x 17 x 37cm)
With antenna up: 17.125 x 9.62 x 14.6" (43 x 24.4 x 37cm)
- Weight
- 22.5 lbs (10kg)
|
Reviews
There are no reviews yet.